The Ship Model Forum

[quote="FFG-7"]I presume you mean when she was 1st commissioned in Sept 1945?[/quote]

Yes or early post war state.

I presume you mean when she was 1st commissioned in Sept 1945?

Anybody have good quality drawings of Midway in her commissioned state?

you are welcome.

Ah! All is clearer now. Thank you. Maurice

I'm pretty certain it is not planking but anti-skid mats due to the layout.

This image of [i]Franklin D. Roosevelt[/i] circa 1950s, also from Ray Bean's set, also seems to show fore-and-aft planking.

I don't think that is planking as it is parallel to the ship's centerline as all previous carriers had the planking perpendicular to the ship's centerline. go thru this link to see if wood planking used on the flight deck. http://www.midwaysailor.com/midway/specifications.html

I am well aware that the Midway class were the first US carriers with armoured flight decks. Essentially, all US carriers from Lexington to the Essex class had steel flight decks with wood sheathing on top, primarily for anti-skid purposes (I understand). This image, from Ray Bean's Midway class set, seems to show fore-and-aft planklng on the flight deck, and he refers consistently in the section covering the ships' early careers to the use of blue flight deck stain (which implies wood since stain does not work on steel) but I've not located documentation of wood sheathing on their decks. That is why I was asking the question.

Thank you,
Maurice

the class were the 1st US aircraft carriers to have an armored flight deck so no wood there.

Did the Midway-class carriers in their straight-deck configuration have a wood covering on the flight deck and, if so, in what pattern was it laid?

Maurice

Greetings,

Took delivery of the 1/350 scale USS Midway last configuration from liners world. This is the design from YESTR Toys. $520.00 delivered. It is a pretty nice kit. Looks to be accurate. I have not measured it for accuracy, but it is pretty close, I think. It needs better radars, an air wing, and PE. One problem I have is that with Shapeways gone, I need a couple of detailed MK-25 BPDMS. Nobody makes them.

https://cults3d.com/en/3d-model/various/uss-midway-cv41-aircraft-carrier-print-ready-model

take a look at these links.
https://www.navsource.org/archives/02/41.htm
https://www.history.navy.mil/research/histories/ship-histories/danfs/m/midway-iii.html
http://www.midwaysailor.com/midway/specifications.html

Hello!
Trumpeter's USS Midway model was recently released. I plan to work on this model for some time. I do not have access to appropriate literature. I would like to make this model in the 1945 version, right after construction was completed. I am looking for information about radars installed during this period. On the middle mast you can see the SK-2 radar antenna, below there was one more antenna, but they can't find information on what type of radar this antenna is. There is a radar antenna on the middle mast, I think it is SPS-8, but I am not sure (I would be grateful for a hint), at the top of this mast there is probably an SG radar antenna, but I cannot determine in any way what kind of radar the antenna is on the rear mast . I am also not sure what radars were installed on the USS Midway at that time - the direct control tower Mk 37, or Mk 12/22, or maybe Mk 25. I will be grateful for a hint.

Really nice job, Sean. Look at that, something finished. :smallsmile: :-)

Hi Sean,


Looks great! I am working on backdating the Coral Sea to a 1972 fit. Overall, I think that the Yestrtoys Kit is really good. I agree with you on the hanger bay. It takes a bit to clean that up. The mast and upper works need a little love along with the radars but a really great kit to start tinkering with.

Mark

https://yestrtoys.com/products/USS-Coral-Sea-p597879806

Back in... November or December, I think it was, somebody posted a link to a 3-D printed late-fit USS Coral Sea by Yestrtoys. Essential for my carrier collection, I bought one right away in 1:700 scale and have been working on her off-and-on ever since. She's finally finished, with the addition of some GMM photoetch and Trumpeter aircraft. Deck stripes are masked and painted, and hull and island numbers are spliced together from a Starfighter Decals USS Kitty Hawk & Constellation sheet. The kit is essentially in her 1989 final fit, but could represent late 70s-early 80s with minimal fuss.
The biggest challenge is that the whole think is printed in one piece - including the completely open hangar - which contains a forest of printing support struts, some of which got so dense as to require a saw blade to clear them out. I did choose to cut off the crane and upper mast and re-attach them later, to keep them from getting broken during the rougher phases of cleanup and construction. Some of those things that show how just because you [i]can[/i] print it in one piece doesn't mean you [i]should[/i]. But even so, glad to have CV-43 join my fleet.

[attachment=2]CV-43 Overhead.JPG[/attachment]

[attachment=1]CV-43 Starboard Overhead.JPG[/attachment]

[attachment=0]CV-43 Port Overhead.JPG[/attachment]

- Sean F.

Greetings,

Here is a link to the 3D-Wild announcement on their site.

https://3d-wild.com/pages/coming-soon


Mark

I am sure this will be all over Facebook and other model ship forums; Three D wild Miniatures will be releasing a post 1947 superstructure for converting the Midway to a later configuration and will also be releasing two different airwing sets. See here on facebook: https://www.facebook.com/groups/ipmsusa/posts/10161082043812999

Exciting times for the Midway class aircraft carrier enthusiasts. Can't wait to see what's coming up next.

[quote="taskforce48"]Images of this time are rare and often unclear. All the images I have show her in a dark overall color, so I get the impression that she maintained her MS-21 paint scheme till after overhaul and island expansion completed. The 41 on the stack is not shadowed in any of the images that I can tell, the image of her having the island work done is pretty clear and the shadowing is not present to my eye and the visible area's of the ship are very dark. I have this image showing her overall, lots of shadows but you can see she is overall one dark color.
[attachment=4]NH49830 Snip.PNG[/attachment]

This image shows no shadowing on Funnel 41
[attachment=3]midway-1239b.jpg[/attachment]

Another image showing the 41 but also showing she is still dark when compared to her navy blue planes
[attachment=2]NH 105565 snip.PNG[/attachment]

If you want something a little brighter, the FDR looks to have commissioned in MS-22, there has been some debate if they are older purple hues or the newer neutral ones that were coming out at the same time. I am leaning towards the newer tones when compared to the USS Franklin in the background of the full image, but that could be a trick of light that she looks so much darker.
[attachment=1]NH106296 snip.PNG[/attachment]

[attachment=0]80-G-K-6611 Snip.PNG[/attachment][/quote]


Thank you for your quick and comprehensive response. It answers my question and, satisfies my EEI, (Essential Elements of Information) very nicely. I will be going with a Navy Blue, based on the color image of it being commissioned, or variation thereof. I have a True Color 5N, which I will use. The deck looks to be a deck blue or a dark gray, so that will be up to me. But; thank you again, very helpful.