The Ship Model Forum

Hello everyone, a little update.
The ship in its structure is almost complete.

I'm finishing the last railings along the hull. I've almost reached the bow. I'll definitely be able to post the complete photos next week.
In the meantime I'll show you some details, because we've reached that point.
[img]https://i.imgur.com/AM4r8TC.jpeg[/img]

[img]https://i.imgur.com/uO2mjRh.jpeg[/img]

Crew chapter.
I divided the men according to rank

[img]https://i.imgur.com/gl3wFOK.jpeg[/img]

For the officers it's simple. Black uniform, black cap and off you go. The buttons and ribbons will be difficult to replicate.
[img]https://i.imgur.com/RTs8uF0.jpeg[/img]

t's for the rest of the crew that I'm having trouble finding the right uniform.

The most accredited one seems to be this one on the left side with two possible uniforms.
[img]https://i.imgur.com/J1OBFHt.jpeg[/img]

But about the mid rank between sailors and officers? I didn't find anything.
Advices?

Good work on the cranes. The model is coming along quite nicely.

Here's a little update. Unfortunately, the work is going slowly, also due to that I found the cranes very difficult to make.
The crane on the right side came out quite well, while with the one on the left side I had a problem with the PE that simulates the cables and therefore appeared less taut than the other one.

[img]https://i.imgur.com/Ahp9S9g.jpeg[/img]

[img]https://i.imgur.com/3UFbY13.jpeg[/img]

The real problem that I noticed when I've assembled them is that the inclination of the arm is wrong, it is too low and does not rest on its base.
I tried to see how with the one on the right (which is better made) would look with the arm resting in its housing correctly. The base of the crane would be crooked, and appears tilted "backwards".

[img]https://i.imgur.com/RJ8vLNa.jpeg[/img]

There are two solutions at the moment:
1. I put the crane like the one on the left, therefore along the side of the ship but not too close to the superstructure otherwise there is no space for the vessel immediately below (the easiest and least dangerous option)
2. I try to force the fold of the parts that I circled with the knowledge that I could break everything. Surely the PE along the red line I traced will bend (the most difficult with the risk of losing the crane completely option)
If there were at least 2 cranes made of resin so I can order them and if I break them I replace them.

Last thing
I opened the box of the figures!!! :lol:
[img]https://i.imgur.com/VFQyrDJ.jpeg[/img]

TADAAA
[img]https://i.imgur.com/9lfgjdK.jpeg[/img]

Thanks Steven for the advice. It was very useful!!!

Thank you Steven, you gave me good advices!!!

This is easy to do, Eduardo. You either use a micro saw, a cutting disk or a milling tool. That doesn't put pressure on the crane arm.

[img]https://modelbrouwers.nl/media/cache/f9/b8/f9b89b2de595d4da08d76acf755ee71b.jpg[/img]

The Mastertools micro saw, really handy but the tip can break or bend.

[img]https://www.modelbrouwers.nl/media/cache/7f/9b/7f9b1ec5648135fe30f147bbcaf9d72b.jpg[/img]

The tool I use mostly now. The gap it creates is 0.2 mm wide.

[img]https://modelbrouwers.nl/media/cache/37/98/3798568fb03af19dfea5620d5450ceab.jpg[/img]

This will not be useful for the entire length.

Hello everyone, here I am with an update on the situation.
Let's get to the ship.
The good thing is that I'm now starting to think about what's missing. And in fact I'm now starting to count them with one hand!!!
[img]https://i.imgur.com/Eco7a6q.jpeg[/img]

The details of the stern are now complete. The stairs in the various levels towards the stern have also been added.
I'm doing the bars on the sides of the hull. Then I have to add the cables and I'm done.

[img]https://i.imgur.com/IGdQpDB.jpeg[/img]
[img]https://i.imgur.com/FfN3hor.jpeg[/img]

I added the walkways to the sides of the bridge.
Here too I will now have to add the wiring for opening and closing these.

[img]https://i.imgur.com/X94m0cr.jpeg[/img]
[img]https://i.imgur.com/KCK0R9i.jpeg[/img]
[img]https://i.imgur.com/wOn7WBM.jpeg[/img]

Now I'm also making the cranes.
I've reached the point where according to the instructions I should erase the part in the middle of the two red lines.
It's not easy at all. If I use cutters I'll definitely deform the plastic at the edges, so I'll have to sand it. It's a really long and not easy thing.

[img]https://i.imgur.com/si2dure.jpeg[/img]

Any advice or experiences?
Thanks

Hi Steven, you had a good idea.
I've removed the catwalk with the ladder. The ship support it's hard to remove because is well glued. I think there's the risk to destroy more than the need.

[img]https://i.imgur.com/O1ZtbMJ.jpeg[/img]

Mifune I think it's gone in another dimension, like the single sock in the washing machine!!!! :twitch:

I took the opportunity to ask for the brass set since I ordered other kits from Pontos.

Hello!

I'm sure that the missing barrel still is here with us in this bizarre reality.

Funtastic looking model!
Mikko

You could remove the whole PE part with the boat stands on it, they seem not to fit exactly to the superstructure so you could correct two problems in one go. To find the barrel I recommend a good brooming session around the loss area. Also check on the ship itself.

Hello everyone, here I am with a series of images.

I managed to complete all the 150mm calibers and the second battery.
I must say that for the second battery I had a lot of trouble with the plastic bags. They didn't want to go in, not only because of the thickness but also because of the structure.
I had to remove all the color and also cut and sand many parts otherwise they wouldn't go in and even hit the edge of the plastic in the upper part of the turret.
A real mess of work. Last but not least, I lost a barrel.
I mean, let's talk about it! I recovered much smaller pieces on the ground and yet the barrel is literally D-I-S-A-P-P-E-A-R-E-D. I mobilized my wife, all the children to search but nothing doing.
I imposed on my wife that for the next ship there must be a white sheet under the table and chair. We'll see.
In the meantime I wrote to Park from Pontos who wrote to me that I could order individual pieces since I have to order another kit.
Rather than glue the plastic barrel of the basic kit which honestly is much larger, I wait.

[img]https://i.imgur.com/NbMMLLg.jpeg[/img]

Here some pictures

[img]https://i.imgur.com/aaDMpsN.jpeg[/img]

Let's say that I finally fixed the reels, glued the 150mm calibers in the foward part, mounted the anti-aircraft guns and everything else. I added the extra step on the upper part of the secondary battery turrets that is indicated in the manual but is not provided in the kit, nor by the pontos. Bitts and railings along the hull are missing and we should be fine.

[img]https://i.imgur.com/ayRAGKK.jpeg[/img]

[img]https://i.imgur.com/tuY8lN6.jpeg[/img]

[img]https://i.imgur.com/V1FEtvz.jpeg[/img]

[img]https://i.imgur.com/YUokyNB.jpeg[/img]

I started to get my hands on the backward side

[img]https://i.imgur.com/2zCyqHT.jpeg[/img]

[img]https://i.imgur.com/zkGpaRV.jpeg[/img]

Now I have to put in a very long railing, only that it has to go behind a ladder.

[img]https://i.imgur.com/AG1FWje.jpeg[/img]

[img]https://i.imgur.com/yJHRz3D.jpeg[/img]

I have to decide what to do. I don't want to break the railing, but I'm pretty sure that if I lift the ladder, even just enough, when I put it back in position the bend angle will break (just two extra moves at the bend point and the very thin PEs will come off)

Thanks Martin

Very nice recovery!!

Yeah you're right. I've noticed too, but the effort of redoing the svastika and my poor skills forced me to keep its position.

I don't think anyone would suspect there ever happened a spill. The only thing I notice was something with the position of your original masking, slightly to port.

Hi everyone, here's the problem fixed during the Easter holidays.
Unfortunately with the white I had to load a lot otherwise you could see underneath. By doing so, however, I lost the ability to see the wooden strips.
For the final part of the wood bridge I think I'll leave it like this. The difference is not excessive and the separation of the swastika decreases the perception.

I think that even by doing tests I do more damage than improvements

[img]https://i.imgur.com/Wx0sTz8.jpeg[/img]
[img]https://i.imgur.com/rGj3hdP.jpeg[/img]
[img]https://i.imgur.com/ZUQ0zGn.jpeg[/img]

During the Easter holidays I will fix the stern of the ship.

[quote="Edoardo81"]I shaked (as I always do) the paint jar to mix the thinner with the paint but the stopper wasn't closed properly and paint went everywhere.

The problem is the paint went also on the stern of the ship

[/quote]

ACK!! That's really unfortunate! :(

Hi guys, here an update.
Unfortunately, work, family, school commitments but especially my children's sports commitments take away any free time I may have. :.-( and therefore progress is slow.

In addition, I'm in a phase where details have to be done and these waste much more time than more substantial work because they have to be checked, assembled, primed, colored, corrected, corrected again, etc. and then at the end you say: well, what progresses have I made during this week? I've assembled 9 lids and 8 paravans! Wow, what enormous progress (irony mode ON) :cry:

At the end I'll post the latest updates and an overview.

Let's start with the overview
[img]https://i.imgur.com/qarHO0B.jpeg[/img]

[img]https://i.imgur.com/2AGcpZz.jpeg[/img]

At the bow, the cleats and the pole on the tip of the bow are missing (obviously the side handrails will be the very last to be installed.
A pole that I am starting to prepare must be inserted on both sides of the hull.

[img]https://i.imgur.com/PnHDPPM.jpeg[/img]

In the A and B turret area, the cable reels are missing. They are in the final stage. I have completed 7 of 14.
Two anti-aircraft guns are to be mounted. They are already ready. They will be installed after the cable reels.

[img]https://i.imgur.com/EMIJcrQ.jpeg[/img]

Made the 4 front tertiary batteries (I call them in this way only because I don't remember the caliber)
What worries me is the handrail which is a single piece that starts in front of the first turret (the one on the right to be clear), makes 3 undulations and then ends straight adjacent to the catapult track! Making this will be a nice challenge, both the radius of the curves, and to not get it caught while assembling it. Fortunately the small calibers are not glued and I can remove them

[img]https://i.imgur.com/SnukBur.jpeg[/img]

[img]https://i.imgur.com/qKY3Jrx.jpeg[/img]

Going towards the stern I completed the famous "covers" always on the base deck. Some open, others closed

[img]https://i.imgur.com/tjfhhpq.jpeg[/img]

That's all folks!

Thanks Mr Church.