The Ship Model Forum • Post a reply

Board index » ModelWarships.com general forum » Picture Post

All times are UTC - 6 hours [ DST ]

not a ship

Moderators: MartinJQuinn, JIM BAUMANN, Jon, Dan K

Post a reply

Username:

Subject:

Message body:
Enter your message here, it may contain no more than 60000 characters.

Smilies

View more smilies

Font size:

	Font colour
[quote="sgtryan13"]Well here is my latest, the Colonial One presidential ship from the new Battlestar Galactica series in 1/350. I loved the lines of this ship the moment I saw it on the series and always wanted a model of her, so I picked up the Mobius model as soon as it came out. My original intention was to build this to the same standards I build my ships, just as a challenge to myself to see if I could compete with the serious sci-fi builders at a competition. Well, due to my personal life being in the dumps the past few months, I had lost my modeling mojo. I decided I needed a quick project to try to get me back into the groove, and not feeling like buying another kit, I figured I would just tackle this one. The kit is really well detailed and the fit is great. There is a nasty seam where the top section meets the main hull parts, and it will be very difficult to fill and sand. I took the easy route and just added a length of solder wire to cover the seam and look like some sort of external piping on the ship. The decals go on great, but the lighter blue one is a little off in it's cut for the windows, so some trimming and repositioning is necessary. the dark blue decal around the bridge and bubble is too short by almost 1/4" leaving a huge void at the back of the bubble where the 2 sides meet. I was able to blend a mix of French blue and insignia blue to paint in this void. I experimented with some new (to me) techniques for making metallic surfaces look burnt/heat damaged, and I like the results so far. I wanted to model her as I think she would have seemed late in the show, where she had done tons of FTL jumps, entered atmospheres, spent time on the ground, etc, so I weathered her a little heavy with oils and pastels. I had fun with this one, and was able to complete it in a couple of days. I went for a quick build that was completed easily, so there are plenty of flaws in it, some nasty seams in the engine areas were simply left alone, so don't expect to see this one winning any awards any time soon, but that is ok. I wanted something quick but more importantly FUN, and this build was exactly that, hopefully it gets me back on track with the Lincoln. [color=#0040BF][size=150][b]SO SAY WE ALL![/b][/size][/color][/quote]

Options:

BBCode is ON

[img] is ON

[flash] is OFF

[url] is ON

Smilies are ON

	Disable BBCode
	Disable smilies
	Do not automatically parse URLs

Question

What is the name in the logo in the top left? (hint it's something dot com):
This question is a means of preventing automated form submissions by spambots.

Topic review - not a ship

Author

Message

Tim Jacobs

Post subject:

Re: not a ship

1/35 Russian/Soviet surface to air missile systems (all Trumpeter)

Attachments:

File comment: SA-4 GANEF

GANEF_resize.jpg [ 77.65 KiB | Viewed 1247 times ]

File comment: SA-6 GAINFUL

GAINFUL_resize_2.jpg [ 73.89 KiB | Viewed 1247 times ]

File comment: SA-6 GAINFUL

GAINFUL_resize_3.jpg [ 70.97 KiB | Viewed 1247 times ]

File comment: SA-12/23 GLADIATOR

GLADIATOR_resize_1.jpg [ 69.77 KiB | Viewed 1247 times ]

File comment: SA-12/23 GLADIATOR

GLADIATOR_resize_2.jpg [ 65.73 KiB | Viewed 1247 times ]

File comment: Group shot
SA-6
SA-12/23
SA-4

Russian_mobile_SAMs_1-35.jpg [ 82.83 KiB | Viewed 1247 times ]

Posted: Sun Apr 28, 2019 2:43 pm

Thom

Post subject:

Re: not a ship

Some (space) ships and non-ships. I do have a small fleet of /350 and /700 that I plan to get to, but until then...

The most recent (space) ship to be finished was a Space Battleships Yamato model. Started out as the Yukikazi, but I changed it to the Murasame using the decals from another kit.

Tamiya's 1/48 F4U-1D

The UNCF Kirishima from Yamato 2199.

Tamiya's 1/48 Ki-46 Dinah

The ships of the Iscandar Protectorate Fleet (non-canon Yamato 2199)

The Yamato from 2199, 1/1000

And my redo of the Battlestar Galactica using two Moebius Pegasus models.

Posted: Mon Nov 12, 2018 10:55 pm

Kometa

Post subject:

Re: not a ship

ZTZ-99A1

Pixel, pixel, pixel, pixel, pixel,

Posted: Sun Nov 11, 2018 2:54 pm

Tim Jacobs

Post subject:

Re: not a ship

W-Model 1/72 resin

Russian SA-12 surface-to-air missile system, combining anti-air and anti-tactical ballistic missile (ATBM) into a single overall system. The 9A82M carries the ATBM missiles. The anti-air missiles are carried by the 9A83 TELAR, but the 9A83 kit I received was unbuildable.

9S19 HIGH SCREEN
9S32 GRILLE PAN
9A82M TELAR

Attachments:

Air Defense.jpg [ 14.97 KiB | Viewed 1484 times ]

Air Defense2.jpg [ 13.36 KiB | Viewed 1484 times ]

Posted: Fri Nov 09, 2018 4:15 pm

YOON G

Post subject:

Re: not a ship

My 1/285 ww2 german vehicles..

You need to present the best tank to your son if you want to raise him the best person

Posted: Sun Dec 18, 2016 3:24 am

TOMLABEL

Post subject:

Re: not a ship

jeroen zuiderduin wrote:

@Kelley, I found the image I made a while ago, realizing it might come in handy. It is a mix of Humbrol and Revell, although colors might vary due to weathering but it's basically what I use for all US equipment.

Cheers
Jeroen

Thanks, Jeroen! This will come in handy! I will probably need to find an alternative to the Revell paints as I don't have them here.

Kelley

Posted: Tue Apr 12, 2016 6:44 pm

jeroen zuiderduin

Post subject:

Re: not a ship

Thanks guys, for the kind words.

I'm struggling to get out of the 'modeling dip' hoping posting some old stuff would bring back the urge to build again.

@Kelley, I found the image I made a while ago, realizing it might come in handy. It is a mix of Humbrol and Revell, although colors might vary due to weathering but it's basically what I use for all US equipment.

Cheers
Jeroen

Posted: Sun Apr 10, 2016 12:55 pm

MichelB

Post subject:

Re: not a ship

I especially like your Dauntless. The oh-so-simple-yet-effective ground plate really gives it speed!

Posted: Sat Apr 09, 2016 7:34 am

TOMLABEL

Post subject:

Re: not a ship

Wow!! That is some great work!!

Your vehicle weathering techniques are excellent as are your figure painting abilities!!! What colors/brands do you use for US fatigues / gear?

Kelley

Posted: Thu Apr 07, 2016 8:14 pm

Goodwood

Post subject:

Re: not a ship

That's a very nice collection of models you've got there, man! I'm envious of your talent...particularly for bogging armored vehicles in mud.

Posted: Wed Apr 06, 2016 3:07 am

jeroen zuiderduin

Post subject:

Re: not a ship

M12 Academy 1/35

Airfix Dauntless 1/72

Mirror Models Diamond Wrecker 1/35

Cologne dio 1/35

Cheers
Jeroen

Posted: Wed Apr 06, 2016 2:36 am

Harpy

Post subject:

Re: not a ship

Tamiya's 1/16th M4 105 HVSS 1945 Okinawa.

Posted: Wed Jan 06, 2016 9:56 am

MatthewB

Post subject:

Re: not a ship

Something you might want to check into.

Some of the Saturns had bare primer insulator (like on the Shuttle External tank) on the surface beneath the booster stage (before the engines).

So the underside would be a rust-red muddy texture.

My brother (an Ex-NASA Engineer) corrected me on that when I was in my late-20s (while he was at NASA).

And some of the Boosters had a greenish primer/insulator.

Edit: Apollos 15/16 - 19 (This is the bottom of 18 you see here) had the green bottoms.

Apollo 11 and at least 12 painted the bottom of the rocket white (so if you are doing Apollo 11 mission, then you would have it right).

But if you are doing a pre-Apollo 11 (Apollo 4 - 10), then you might find either Red or White, depending upon the news coverage (only 10 was really known to have News Coverage, because that was SUPPOSED to have been the first attempt at the moon, but they lost it on lunar insertion).

As for 12 - 16.... 12 would have been white or Red, 13 would have been red, and the rest I am not sure of (I would need to run down to Johnson to check the photos).

MB

Posted: Fri Dec 11, 2015 1:47 am

ModelMonkey

Post subject:

Re: not a ship

Saturn V! Now that's a monster! Very cool and very good work.

Posted: Thu Dec 10, 2015 9:14 am

Devin

Post subject:

Re: not a ship

Very nice. I'd love to have the room to build that kit.

Posted: Thu Dec 10, 2015 8:47 am

boomstick68

Post subject:

Re: not a ship

I have always been a big fan of the Apollo project. Finally some progress on my big Dragon Saturn V Apollo 11

Posted: Wed Dec 09, 2015 11:42 pm

sgtryan13

Post subject:

Re: not a ship

Well here is my latest, the Colonial One presidential ship from the new Battlestar Galactica series in 1/350.

I loved the lines of this ship the moment I saw it on the series and always wanted a model of her, so I picked up the Mobius model as soon as it came out.

My original intention was to build this to the same standards I build my ships, just as a challenge to myself to see if I could compete with the serious sci-fi builders at a competition. Well, due to my personal life being in the dumps the past few months, I had lost my modeling mojo. I decided I needed a quick project to try to get me back into the groove, and not feeling like buying another kit, I figured I would just tackle this one. The kit is really well detailed and the fit is great. There is a nasty seam where the top section meets the main hull parts, and it will be very difficult to fill and sand. I took the easy route and just added a length of solder wire to cover the seam and look like some sort of external piping on the ship.

The decals go on great, but the lighter blue one is a little off in it's cut for the windows, so some trimming and repositioning is necessary. the dark blue decal around the bridge and bubble is too short by almost 1/4" leaving a huge void at the back of the bubble where the 2 sides meet. I was able to blend a mix of French blue and insignia blue to paint in this void.

I experimented with some new (to me) techniques for making metallic surfaces look burnt/heat damaged, and I like the results so far.

I wanted to model her as I think she would have seemed late in the show, where she had done tons of FTL jumps, entered atmospheres, spent time on the ground, etc, so I weathered her a little heavy with oils and pastels.

I had fun with this one, and was able to complete it in a couple of days. I went for a quick build that was completed easily, so there are plenty of flaws in it, some nasty seams in the engine areas were simply left alone, so don't expect to see this one winning any awards any time soon, but that is ok. I wanted something quick but more importantly FUN, and this build was exactly that, hopefully it gets me back on track with the Lincoln.

SO SAY WE ALL!

Attachments:

IMG_5039.JPG [ 92.99 KiB | Viewed 2163 times ]

IMG_5040.JPG [ 115.78 KiB | Viewed 2163 times ]

IMG_5041.JPG [ 108.45 KiB | Viewed 2163 times ]

IMG_5043.JPG [ 109.91 KiB | Viewed 2163 times ]

IMG_5045.JPG [ 55.61 KiB | Viewed 2163 times ]

IMG_5046.JPG [ 85.85 KiB | Viewed 2163 times ]

IMG_5047.JPG [ 81.57 KiB | Viewed 2163 times ]

IMG_5049.JPG [ 66.87 KiB | Viewed 2163 times ]

IMG_5050.JPG [ 73.7 KiB | Viewed 2163 times ]

IMG_5051.JPG [ 125.29 KiB | Viewed 2163 times ]

Posted: Mon Nov 23, 2015 10:23 am

MatthewB

Post subject:

Re: not a ship

EJM wrote:

For all you Yamatoholics out there..........here's my 1/500 scale Bandai Space Battleship Yamato I am currently finishing.
Progress thread is here:
http://www.whatifmodelers.com/index.php ... 647.0.html

Is that from the older series, or the newer Uchū Senkan Yamato 2199?

The new series, if you have not seen it is freaking unbelievable in the details they managed to get into it.

They show all manner of logistical and operational details for the Gamillas Fleet that justify many of their design decisions.

And the newer models they have (fortunately NOT in 1/700, but only in 1/1000) are spectacular.

The battle scenes in the new series were inspired by a combination of actual WWII footage, and the new BSG series. The scenes with the carrier battles is spectacular, when they show the deck operations, and flight operations in the bridge being conducted almost like a real CVA operation center and deck.

Like I said... If you haven't seen it, you HAVE TO SEE IT!!!

MB

Posted: Sat Sep 19, 2015 1:24 pm

MatthewB

Post subject:

Re: not a ship

johndon wrote:

I've been away from ship modelling for a couple of years and this is what I've been doing instead (British Railways in the early 1980s), scale is 1/76.

Just got my 1/350 New Jersey back down from the top of the wardrobe and just bought the 1/200 Iowa so its all systems go on the warships again now...

John

I lived in London during the early '80s (Hanwell, Ealing, Kinsington), and this brought back a lot of fond memories.

The rail line from London (can't recall which station) used to run right behind Uxbridge Road near Ealing Common (near my flat), and I would see the trains in the first photo going by at all hours.

Then there were the 120s that would fly by an 120mph, and make the house shake...

I miss being young. Aging has to be the most evil thing to happen to people. I miss England at that time, too. It was one of the best places on earth to be at that time.

MB

Posted: Sat Sep 19, 2015 1:18 pm

EJM

Post subject:

Re: not a ship

Posted: Wed Jul 01, 2015 6:51 pm

Board index » ModelWarships.com general forum » Picture Post

All times are UTC - 6 hours [ DST ]

Jump to: