The Ship Model Forum

The Ship Modelers Source
It is currently Thu Mar 28, 2024 2:34 pm

All times are UTC - 6 hours [ DST ]




Post a reply
Username:
Subject:
Message body:
Enter your message here, it may contain no more than 60000 characters. 

Smilies
:smallsmile: :wave_1: :big_grin: :thumbs_up_1: :heh: :cool_1: :cool_2: :woo_hoo:
View more smilies
Font size:
Font colour
Options:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Disable BBCode
Disable smilies
Do not automatically parse URLs
Question
What is the name in the logo in the top left? (hint it's something dot com):
This question is a means of preventing automated form submissions by spambots.
   

Topic review - 87 scale RO,RO truck and container ferry.
Author Message
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
It sure has being a while since last update with some very good news indeed, the hull construction has now being completed and moved onto the funnel deck and funnel construction which is finished, yeah has taken 3 years to get this far, I thought I wouldn't there.

Now I am working on the bridge, finished the ships accommodation block, haven't being on it for a week now, being working on my layout during the day and the bridge is also completed ready for painting tomorrow , that has being a struggle indeed, changing different designs and came up with my own which worked pics to follow.

First two pics of the last bulkhead in place, 30 bulkheads later and the final hull panel being glued together, wow couldn't believe I finely did it was on a high that night.

Third pic of the funnel deck and funnel base glued in place, fourth pic of the front round shape of the funnel was not an easy task but got there, fifth pic of the real funnel, I haven't done any work on the detail of the top of the funnel as yet, wanted to move onto the bridge.

Sixth pic of the back of the funnel, will have panels to build, final pic of the funnel deck got a lot of detail to do there, be a while off .

Corona Sea is now looking like the real ship I am modelling, in some ways I wish I started on the R/C version .

Tony from down under.


Attachments:
20200906_084309.jpg
20200906_084309.jpg [ 135.12 KiB | Viewed 647 times ]
20200914_214816.jpg
20200914_214816.jpg [ 127.9 KiB | Viewed 647 times ]
20200920_081402.jpg
20200920_081402.jpg [ 131 KiB | Viewed 647 times ]
20200923_204839.jpg
20200923_204839.jpg [ 134.84 KiB | Viewed 647 times ]
56190015_470803033456882_6513193118404182016_n.jpg
56190015_470803033456882_6513193118404182016_n.jpg [ 275.44 KiB | Viewed 647 times ]
20200922_094947.jpg
20200922_094947.jpg [ 104 KiB | Viewed 647 times ]
55516228_416562309103304_7941872701897965568_n  a.jpg
55516228_416562309103304_7941872701897965568_n a.jpg [ 125.08 KiB | Viewed 647 times ]
Post Posted: Tue Oct 13, 2020 7:31 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Here she is all four hull section joined up at last, the second stern hull section not yet finished but well under way, I glued in the two bulkheads at each end, she looks stunning indeed, when finely finished will be be mind blowing.

I am itching to glue in place the next bulkhead that will start off the top deck, where the white meets the blue line , probably have to glue in the next bulkhead as well , I am hopping to get the scale letters for the side of the ship, the logo on the funnel be easy to copy.

At long last she is looking like the ship I am modelling, on a very big high.

Tony from down under


Attachments:
20200712_133635.jpg
20200712_133635.jpg [ 136.98 KiB | Viewed 772 times ]
20200712_133708.jpg
20200712_133708.jpg [ 140.41 KiB | Viewed 772 times ]
20200712_133731.jpg
20200712_133731.jpg [ 139.54 KiB | Viewed 772 times ]
Corona Sea.jpg
Corona Sea.jpg [ 110.11 KiB | Viewed 772 times ]
Post Posted: Sun Jul 12, 2020 7:24 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Hi Chris :wave_1: I have being pretty busy starting construction on the forth section and test joining of the forth hull section, first three pics of first two bulkheads in place that has the end section of the single ramp from main deck to upper deck .

Next four pics of the forth hull section test joining. I forgot to check the squareness of the last bulkhead of the stern hull section, the forth hull section isn't joining up will has a gap, not to worry easy fix and won't see once the side hull panels are glued in place.

Saturday night I will work on gluing i place two bulkheads on the other end so I can join up the rest of the ship hull.

Tony form cold down under


Attachments:
20200609_100700.jpg
20200609_100700.jpg [ 115.3 KiB | Viewed 813 times ]
20200609_100707.jpg
20200609_100707.jpg [ 128.34 KiB | Viewed 813 times ]
20200609_100724.jpg
20200609_100724.jpg [ 173.06 KiB | Viewed 813 times ]
20200625_222626.jpg
20200625_222626.jpg [ 116.61 KiB | Viewed 813 times ]
20200625_222645.jpg
20200625_222645.jpg [ 110.36 KiB | Viewed 813 times ]
20200625_222719.jpg
20200625_222719.jpg [ 116.78 KiB | Viewed 813 times ]
20200625_222743.jpg
20200625_222743.jpg [ 124.84 KiB | Viewed 813 times ]
90920819_610832389506390_7521883921789747200_n.jpg
90920819_610832389506390_7521883921789747200_n.jpg [ 95.75 KiB | Viewed 813 times ]
tor_corona_2007_inr_011.jpg
tor_corona_2007_inr_011.jpg [ 120.03 KiB | Viewed 813 times ]
Post Posted: Thu Jun 25, 2020 7:43 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
HI TONY about how to work your doors look on my tiger site
chris
Post Posted: Wed Apr 29, 2020 2:41 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Has being awhile since last update, at long last I have finished the stern hull build and ready to make a start on the third and final section that will make up the hull.

First two pics and the last pic Corona Sea's sister ship leaving port, is what my model will look like when finished not far away, third and forth pics the stern rope room windows, as close as I can get, still more work there, I may just blacken out the smaller rope holes, cardboard doesn't drill well .

Pics five and six, I am looking at using a pulley system to open and close the stern ramps, plenty of room for the motors and gear boxes on the single stern ramp, longer shaft to the double stern ramp, will that work I still will have the hydraulic rams for show, need some advice on how to tackle that.

It has at least being four years since I started planning the ship, never thought I would finish the stern hull section, one more section to build, during the day
I am working on the railway bridge that the ship will sit, which now has a underneath water line clearance of 2 feet.

The bridge being the main feature of the layout, will have an above arch 2 feet high from rail deck with 14 foot main span, be a stunning site indeed, I am planning a Ro, Ro port as well for two ships.

Tony from sunny down under cooling down fast


Attachments:
20200420_203720 a.jpg
20200420_203720 a.jpg [ 110.5 KiB | Viewed 883 times ]
20200420_203755.jpg
20200420_203755.jpg [ 102.27 KiB | Viewed 883 times ]
IMG_1072.jpg
IMG_1072.jpg [ 159.8 KiB | Viewed 883 times ]
20200424_092307.jpg
20200424_092307.jpg [ 109.05 KiB | Viewed 883 times ]
20200421_193903.jpg
20200421_193903.jpg [ 102.13 KiB | Viewed 883 times ]
Geezer-79.jpg
Geezer-79.jpg [ 113.56 KiB | Viewed 883 times ]
Corona sea's sister ship.jpg
Corona sea's sister ship.jpg [ 153.62 KiB | Viewed 883 times ]
Post Posted: Sun Apr 26, 2020 5:54 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Hi will, hope you are copping well with those restriction in NSW, won't be lifted for at least an another month .

Many thanks, haven't done much progress on the ship's stern for a couple of weeks, back on it tonight want to finish gluing the second side sheet on the port side and same on the starboard side then cut the upper deck.

Then the main hull of the stern section is finished, yes I have done so was easy used tooth pics for the shafts worked out well, big job to build working hydraulic rams.

How is your destroyer build going is it fished yet.

Tony take care
Post Posted: Fri Apr 17, 2020 6:14 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
boatman2 wrote:
AN HI Tony i'll also have a look through your RO RO build when I get time but I think ive had a look some wks ago as you are fittin in not only lorryises an such but trains as well earn't you
anyway all best
chris



Hi Chris, thanks, yeah will have trailers containers rolls of paper and other bigger loads like locos and trams, wind turbine parts and so on.

Take care Tony
Post Posted: Fri Apr 17, 2020 6:03 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Its really looking good Tony, very impressive, how did you go with the ramp mechanism - looked like a complicated job from here, hope you are staying safe and well in the current climate,
cheers, Will
Post Posted: Mon Apr 06, 2020 5:31 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
AN HI Tony i'll also have a look through your RO RO build when I get time but I think ive had a look some wks ago as you are fittin in not only lorryises an such but trains as well earn't you
anyway all best
chris
Post Posted: Sat Apr 04, 2020 5:28 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
At long last I have finely glued in place the last bulkhead for the stern section which is 537.5 mm's in length, x 4 times give the length of ship, also finished the stern rope room that has one triple winch, details to come later.

Next step is cut and glue in place the 2 mm thick hull sides, have worked out the the height on both sides, will then start looking like the stern of Corona Sea the ship I am modelling .

Pics one and two the rope and stern winch room, where the access door from steps is the floor I be gluing in place so I can fit the steps which works out to be 12 mm high at 3 mm steps. I will work out the height of the hand rails , the middle of the second rail to the top of the rail is the height of the black rope supports at the entrance to to rope room .

Third pic of the starboard side rope room windows , forth pic she has her fist three containers, the container on the to deck close to where I have started building the section the funnel sits on.

A lot of work still ahead, once done as far as I can go will start on the next and final section to the ship, be the easiest section to build.

Tony from warm down under.


Attachments:
59801711_749697908765353_4474338676607811584_an.jpg
59801711_749697908765353_4474338676607811584_an.jpg [ 108.78 KiB | Viewed 1006 times ]
20200303_202116.jpg
20200303_202116.jpg [ 102.58 KiB | Viewed 1006 times ]
20200303_202142.jpg
20200303_202142.jpg [ 92.21 KiB | Viewed 1006 times ]
20200303_202105.jpg
20200303_202105.jpg [ 104.96 KiB | Viewed 1006 times ]
20200303_202213.jpg
20200303_202213.jpg [ 111.43 KiB | Viewed 1006 times ]
Post Posted: Fri Mar 06, 2020 5:37 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Hi will, many thanks yeah I started the building program Wednesday night after a 10 week absence, before Christmas moved to a new address not far away in the next suburb, to a unit, has a good size back yard big enough for my layout which has to be rebuild, pic to follow, keep an eye out for your email.

Last night finished cutting out and gluing the together two pieces that made up the bulkhead and cut and glued the frame work between the two bulkheads, I make use of the off cuts.


How is your ship build going.

Hope you weren't to affected with those bad bush fires, most of NSW burnt out. don't here of any fires burning up here, we have had wild weather, 220 mm's in two days

Tony from sunny down under.
Post Posted: Thu Feb 20, 2020 4:55 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Gadday Tony,
how is the work going?. Yours is really starting to come together,
Cheers, Will
Post Posted: Fri Feb 14, 2020 3:09 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Being a while since last update, just moved to a new address and settling in, I have closed in the wall between the main deck and single ramp, only have two more bulkheads to cut out and glue in place, takes time, hopefully back into ship building tonight.


The first pic of the real ship where I am working on the model, pic one and two is the start of the star case to the upper deck, pic two where the cut out is to the end bulkhead is the stern rope room, lots of detail there, there is three level set of steps to the rope room. Once the last bulkhead is in place will cut out the main deck and upper deck floor, paint and mark the trailer lanes.

Last two pics different photo angles .

Tony from hot down under


Attachments:
003.jpg
003.jpg [ 122.7 KiB | Viewed 1232 times ]
001.jpg
001.jpg [ 106.79 KiB | Viewed 1232 times ]
002.jpg
002.jpg [ 111.45 KiB | Viewed 1232 times ]
004.jpg
004.jpg [ 116.35 KiB | Viewed 1232 times ]
005.jpg
005.jpg [ 110.89 KiB | Viewed 1232 times ]
Post Posted: Fri Dec 13, 2019 4:22 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Advancing well since last port, the single ramp is now in place and glued in place two more bulkheads from the stern bulkhead, being working on the divider wall for the single ramp, not easy, but finely making progress, the wall is not straight down near the single ramp stern bulkhead the wall goes on an angle for a couple of bulkheads and then straight for 24 mm's

Pic 7 links up 4,5 and 6 pics, pics 5 and 6 the join of the wall you wont see as I will be gluing in place a second wall making the wall 2 mm's thick, on the plan pic 7 the first arrow is where the join is and second arrow is where the wall will finish and goes straight.

Tonight I will finish the wall and the next bulkhead will go where the second arrow is, sure a lot of work but worth the effort, is oo hot to work on my train layout, the weekend is out 35 degrees ouch be in the nice cool hobby room.

Tony from hot down under


Attachments:
001.jpg
001.jpg [ 115.53 KiB | Viewed 1331 times ]
002.jpg
002.jpg [ 116.97 KiB | Viewed 1331 times ]
003.jpg
003.jpg [ 96.84 KiB | Viewed 1331 times ]
004.jpg
004.jpg [ 97.52 KiB | Viewed 1331 times ]
005.jpg
005.jpg [ 93.22 KiB | Viewed 1331 times ]
006.jpg
006.jpg [ 99.39 KiB | Viewed 1331 times ]
007.jpg
007.jpg [ 115.91 KiB | Viewed 1331 times ]
Post Posted: Wed Oct 23, 2019 11:38 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Morning Will,

Yeah has, I have started work on the ship again , it is slow work when having to cut the bulkheads out of cardboard and then glue them in place adding support card takes time. Last night I glued in place the second bulkhead and cut the middle pieces that strengthen two bulkheads, haven't starboard side yet was getting pretty hot with the light .

Where the trailer is, it be a lot higher to where it is in the pic, the second pic is where I am working on my model of the ship, the single ramp ends into the next section, can't glue the ramp into place till all the bulkheads are finished will take a couple about a week.

I plan use either plastic or brass tubes with brass rods for the hydraulic rams , hopping the hobby shop will sell brass pieces for the end of the ram to hold it in place same at the top of the ram, going to the hobby shop in a couple of weeks hanging out till then. I need to buy more HO scale Peco track joiners and plastic joiners will send you some progress pics doing great guns,working on the layout today, working on the northern ramp coming off the bridge to the back of the layout dropping 7 inches have dropped down 3 inches already 4 inches to go on a 40 foot ramp.

Look forward to seeing those progress pics of you gluing the prop shafts in place.

Tony


Attachments:
20191018_084138.jpg
20191018_084138.jpg [ 106 KiB | Viewed 1377 times ]
IMG_0741   a.jpg
IMG_0741 a.jpg [ 120.76 KiB | Viewed 1377 times ]
Post Posted: Thu Oct 17, 2019 6:45 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
G'day Tony,
its been a while for both us. Haven't had the time to put into mine for a while but have bought the uni joints to connect my newly bought motors to the prop shafts and I will shortly begin cutting my hull to install it all. Glad to see more progress on your ship - it is certainly more complicated than mine!. What are you going to use for the hydraulic rams? I guess it will be opening remotely or by hand?. Hope you are well and talk to you soon,
cheers, Will
Post Posted: Tue Oct 08, 2019 3:45 pm
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Hi Chris, many thanks will for sure, I am working on the stern section, the ship I building in 4 sections have four more bulkheads to cut out and glue in place, will be bracing each bulkhead as I go, I can get two bulkheads out of one sheet of 1mm cardboard.

I cut out two halfs and glue them together, making the bulkheads 2mm thick, she is 2.150 metres long by 305 mm beam, height about 15 inches high from water line, I plan to build a remote control model of the same ship, this build is a learning curve,, scale is 1/87 scale, my other main hobby is model trains.

Have the trailers and the containers, be working on other loads, they have a cassette system where the put stuff on line the wind turbine parts and trains, pluss paper rolls.

Tony from down under
Post Posted: Fri Sep 27, 2019 6:49 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
HI Ive been whatching your ro/ro thread an found it quite intresting an am whatching out for more updates keep up the good work
chris
Post Posted: Fri Sep 27, 2019 3:23 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Hi Will,

Thanks, I have being working on the stern section cutting out and making the bulkheads, be a few, will make what I need and then glue them onto the keel base plate, at ot of work like the bow section.

Yeah I have made the hinges, close to the the ones on the ship, marked and cut the slots for the hydraulic rams, needs to be tided up, will do that when the bulkhead is glued in place, the hinges on the ship go right down to the plat the bloke was standing on, I will do the same.

Have you being doing any work on your layout before it gets too hot and how is the destroyer going is it finished, have you seen on TV that at the news agent you can buy a mag on the Bismark Battle ship every month of week, be pretty costly ship when built,will look into it to see if it is worth the effort.

Was going to work on the ship tonight, after talking to my sister and texting to a mate blew that iea out, have to wait till Saturday night buuilding a new bridge, keep an eye out for your email will send you some pics.

Tony from wet down under


Attachments:
IMG_3503.jpg
IMG_3503.jpg [ 108.97 KiB | Viewed 1512 times ]
Post Posted: Thu Sep 26, 2019 7:13 am
  Post subject:  Re: 87 scale RO,RO truck and container ferry.  Reply with quote
Gadday Tony,
how is it going?. You are certainly making good progress and man, is she going to be a big model. What did you end up doing with the hinges?
Cheers, Will
Post Posted: Fri Sep 13, 2019 3:13 am

All times are UTC - 6 hours [ DST ]


Jump to:  
Powered by phpBB® Forum Software © phpBB Group