Author |
Message |
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Great- order will be forthcoming. Walt
Great- order will be forthcoming. Walt
|
|
|
|
Posted: Mon Nov 11, 2019 8:35 am |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Hello Walt, Thank you for you message, full hull version of Bertholf is available now. Modelers have the choice between full hull or waterline, there is a different numbering for the kits on the website. Mow!! Ben
Hello Walt, Thank you for you message, full hull version of Bertholf is available now. Modelers have the choice between full hull or waterline, there is a different numbering for the kits on the website. Mow!! :wave_1: :wave_1: Ben
|
|
|
|
Posted: Mon Nov 11, 2019 5:35 am |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
When will the full-hull model be available? Walt Haynes
When will the full-hull model be available? Walt Haynes
|
|
|
|
Posted: Sun Nov 10, 2019 8:04 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Interested to see the markings for this kit!
Interested to see the markings for this kit!
|
|
|
|
Posted: Fri Nov 08, 2019 10:56 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 USCGC Bertholf WMSL-750 now available! |
|
|
Black Cat wrote: Hello, Great news 1/350 USGC Bertholf from Black Cat Models will be available this weekend ! Finished pre-production test model is shown below, gun tube has been broken during the photo cession, it will be replaced soon ! The HH-65 Dolphin will be available separately in a set of two, same for the three boats of Bertholf. A new series of 1/350 armor vehicles will be released in the form of Sherman M-4 in its basic and dozer versions, as will also a M-7 Priest howitzer. Meow!! Ben This is fantastic Ben!!!! Any plans to produce the variant frigate from the Legend Class?? Merci mon ami
[quote="Black Cat"]Hello, Great news 1/350 USGC Bertholf from Black Cat Models will be available this weekend ! Finished pre-production test model is shown below, gun tube has been broken during the photo cession, it will be replaced soon !
The HH-65 Dolphin will be available separately in a set of two, same for the three boats of Bertholf. A new series of 1/350 armor vehicles will be released in the form of Sherman M-4 in its basic and dozer versions, as will also a M-7 Priest howitzer. Meow!! :wave_1: :wave_1: Ben[/quote]
This is fantastic Ben!!!!
Any plans to produce the variant frigate from the Legend Class??
Merci mon ami :nod_2:
|
|
|
|
Posted: Fri Nov 08, 2019 4:44 pm |
|
|
|
|
|
Post subject: |
1/350 USCGC Bertholf WMSL-750 now available! |
|
|
Hello, Great news 1/350 USGC Bertholf from Black Cat Models will be available this weekend ! Finished pre-production test model is shown below, gun tube has been broken during the photo cession, it will be replaced soon ! The HH-65 Dolphin will be available separately in a set of two, same for the three boats of Bertholf. A new series of 1/350 armor vehicles will be released in the form of Sherman M-4 in its basic and dozer versions, as will also a M-7 Priest howitzer. Meow!! Ben
Hello, Great news 1/350 USGC Bertholf from Black Cat Models will be available this weekend ! Finished pre-production test model is shown below, gun tube has been broken during the photo cession, it will be replaced soon ! [img]https://blackcatmodels.eu/1750-large_default/uscg-bertholf-1350.jpg[/img] [img]https://blackcatmodels.eu/1753-large_default/uscg-bertholf-1350.jpg[/img] [img]https://blackcatmodels.eu/1754-large_default/uscg-bertholf-1350.jpg[/img] [img]https://blackcatmodels.eu/1751-large_default/uscg-bertholf-1350.jpg[/img] The HH-65 Dolphin will be available separately in a set of two, same for the three boats of Bertholf. A new series of 1/350 armor vehicles will be released in the form of Sherman M-4 in its basic and dozer versions, as will also a M-7 Priest howitzer. Meow!! :wave_1: :wave_1: Ben
|
|
|
|
Posted: Fri Nov 08, 2019 4:23 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Definitely a "must have" kit. Sign me up!
Definitely a "must have" kit. Sign me up! :-)
|
|
|
|
Posted: Mon Nov 04, 2019 10:32 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Oh that is beautiful! Especially the lights along the top of the hangar doors!
Oh that is beautiful! Especially the lights along the top of the hangar doors!
|
|
|
|
Posted: Sun Nov 03, 2019 4:33 pm |
|
|
|
|
|
Post subject: |
More photos ! |
|
|
Hello, This time more photos of the stern with the boats cradle in place and removed, and the CIWS ready to fire ! Enjoy !! Meow!! Ben
Hello, This time more photos of the stern with the boats cradle in place and removed, and the CIWS ready to fire ! [img]https://blackcatmodels.eu/1746-medium_default/uscg-bertholf-wmsl-750-1350.jpg[/img] [img]https://blackcatmodels.eu/1748-medium_default/uscg-bertholf-wmsl-750-1350.jpg[/img] [img]https://blackcatmodels.eu/1749-medium_default/uscg-bertholf-wmsl-750-1350.jpg[/img] Enjoy !! Meow!! :wave_1: :wave_1: Ben
|
|
|
|
Posted: Sun Nov 03, 2019 4:29 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
|
|
|
Posted: Sun Nov 03, 2019 8:13 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Bertholf first photos |
|
|
Black Cat wrote: Hello, Just to give you an idea of the high level of details found on the new Black Cat Models 1/350 USCGC Bertholf, two photos of the side rubber boat on its cradle (empty on the first shot) More photos to follow soon ! Meow!! Ben Yeah thats looking good. Looking forward to the new announcements.
[quote="Black Cat"]Hello, Just to give you an idea of the high level of details found on the new Black Cat Models 1/350 USCGC Bertholf, two photos of the side rubber boat on its cradle (empty on the first shot) [img]https://blackcatmodels.eu/1742-medium_default/uscg-bertholf-1350.jpg[/img] [img]https://blackcatmodels.eu/1743-medium_default/uscg-bertholf-1350.jpg[/img] More photos to follow soon ! :cool_1: :cool_1: Meow!! Ben[/quote]
Yeah thats looking good. Looking forward to the new announcements.
|
|
|
|
Posted: Sun Nov 03, 2019 6:33 am |
|
|
|
|
|
Post subject: |
1/350 Bertholf first photos |
|
|
Hello, Just to give you an idea of the high level of details found on the new Black Cat Models 1/350 USCGC Bertholf, two photos of the side rubber boat on its cradle (empty on the first shot) More photos to follow soon ! Meow!! Ben
Hello, Just to give you an idea of the high level of details found on the new Black Cat Models 1/350 USCGC Bertholf, two photos of the side rubber boat on its cradle (empty on the first shot) [img]https://blackcatmodels.eu/1742-medium_default/uscg-bertholf-1350.jpg[/img] [img]https://blackcatmodels.eu/1743-medium_default/uscg-bertholf-1350.jpg[/img] More photos to follow soon ! :cool_1: :cool_1: Meow!! Ben
|
|
|
|
Posted: Fri Nov 01, 2019 4:36 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Heavy Melder, Yes, the soon to be released 1/400 model kit will be a WWII Royal Navy and also Royal Canadian Navy. When the pre-production models arrive, I will make the announcement. Meow!! Ben
Heavy Melder,
Yes, the soon to be released 1/400 model kit will be a WWII Royal Navy and also Royal Canadian Navy. When the pre-production models arrive, I will make the announcement. :whistle: :whistle: Meow!! Ben
|
|
|
|
Posted: Fri Nov 01, 2019 12:31 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Black Cat wrote: Hello Miguel, Curiosity is a good thing, but I cannot say too much at the moment about Black Cat Models future releases. The only thing I can unveil is that the 1/400 ship will be Royal Navy, and that no less than five 1/350 US Navy ships are currently under development. One will have three different versions, the other one only two... More information will be given as the projects near their completion, ha, ha!!! David, You will probably be amazed by the high standard of quality of Bertholf in 1/350 scale. The kit will comprise a lot of parts, larger ones are in resin, but the finest ones like the boat cradles and all the bracing found on the stern will be 3D printed with one of our most precise printer. I will post in a matter of days some photos of a pre-production model, so you can make your opinion. You will not be desapointed ! Meow!! Ben I hope the 1/400 Royal Navy will be a WW2 subject because I buy almost any navy that's post war and I don't want to wishing that it was 1/350 instead of 1/400. I stay out of RN WW2 stuff, so a 1/400 kit won't bother me.
[quote="Black Cat"]Hello Miguel, Curiosity is a good thing, but I cannot say too much at the moment about Black Cat Models future releases. The only thing I can unveil is that the 1/400 ship will be Royal Navy, and that no less than five 1/350 US Navy ships are currently under development. One will have three different versions, the other one only two... More information will be given as the projects near their completion, ha, ha!!!
David, You will probably be amazed by the high standard of quality of Bertholf in 1/350 scale. The kit will comprise a lot of parts, larger ones are in resin, but the finest ones like the boat cradles and all the bracing found on the stern will be 3D printed with one of our most precise printer. I will post in a matter of days some photos of a pre-production model, so you can make your opinion. You will not be desapointed ! :cool_2: :cool_2: Meow!! :wave_1: :wave_1: Ben[/quote]
I hope the 1/400 Royal Navy will be a WW2 subject because I buy almost any navy that's post war and I don't want to wishing that it was 1/350 instead of 1/400. I stay out of RN WW2 stuff, so a 1/400 kit won't bother me.
|
|
|
|
Posted: Fri Nov 01, 2019 5:27 am |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Black Cat wrote: Hello Miguel, Curiosity is a good thing, but I cannot say too much at the moment about Black Cat Models future releases. The only thing I can unveil is that the 1/400 ship will be Royal Navy, and that no less than five 1/350 US Navy ships are currently under development. One will have three different versions, the other one only two... More information will be given as the projects near their completion, ha, ha!!! David, You will probably be amazed by the high standard of quality of Bertholf in 1/350 scale. The kit will comprise a lot of parts, larger ones are in resin, but the finest ones like the boat cradles and all the bracing found on the stern will be 3D printed with one of our most precise printer. I will post in a matter of days some photos of a pre-production model, so you can make your opinion. You will not be desapointed ! Meow!! Ben Looking forward to it!
[quote="Black Cat"]Hello Miguel, Curiosity is a good thing, but I cannot say too much at the moment about Black Cat Models future releases. The only thing I can unveil is that the 1/400 ship will be Royal Navy, and that no less than five 1/350 US Navy ships are currently under development. One will have three different versions, the other one only two... More information will be given as the projects near their completion, ha, ha!!!
David, You will probably be amazed by the high standard of quality of Bertholf in 1/350 scale. The kit will comprise a lot of parts, larger ones are in resin, but the finest ones like the boat cradles and all the bracing found on the stern will be 3D printed with one of our most precise printer. I will post in a matter of days some photos of a pre-production model, so you can make your opinion. You will not be desapointed ! :cool_2: :cool_2: Meow!! :wave_1: :wave_1: Ben[/quote]
Looking forward to it!
|
|
|
|
Posted: Thu Oct 31, 2019 11:14 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
I'm drooling just at the news...
Disappointment, I hope not! I'm still purring from the Farragut, LOL.
I'm drooling just at the news...
Disappointment, I hope not! I'm still purring from the Farragut, LOL.
|
|
|
|
Posted: Wed Oct 30, 2019 7:35 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Hello Miguel, Curiosity is a good thing, but I cannot say too much at the moment about Black Cat Models future releases. The only thing I can unveil is that the 1/400 ship will be Royal Navy, and that no less than five 1/350 US Navy ships are currently under development. One will have three different versions, the other one only two... More information will be given as the projects near their completion, ha, ha!!! David, You will probably be amazed by the high standard of quality of Bertholf in 1/350 scale. The kit will comprise a lot of parts, larger ones are in resin, but the finest ones like the boat cradles and all the bracing found on the stern will be 3D printed with one of our most precise printer. I will post in a matter of days some photos of a pre-production model, so you can make your opinion. You will not be desapointed ! Meow!! Ben
Hello Miguel, Curiosity is a good thing, but I cannot say too much at the moment about Black Cat Models future releases. The only thing I can unveil is that the 1/400 ship will be Royal Navy, and that no less than five 1/350 US Navy ships are currently under development. One will have three different versions, the other one only two... More information will be given as the projects near their completion, ha, ha!!!
David, You will probably be amazed by the high standard of quality of Bertholf in 1/350 scale. The kit will comprise a lot of parts, larger ones are in resin, but the finest ones like the boat cradles and all the bracing found on the stern will be 3D printed with one of our most precise printer. I will post in a matter of days some photos of a pre-production model, so you can make your opinion. You will not be desapointed ! :cool_2: :cool_2: Meow!! :wave_1: :wave_1: Ben
|
|
|
|
Posted: Wed Oct 30, 2019 3:40 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Very exciting to see a modern USCG National Security Cutter in 1/350 scale! And one that's been in the news! Very anxious to see you you deal with some of the details on this ship such as the bridge and boat cradle/crane (or whatever they call that arrangement on the starboard side of the boat). Great to see it's coming with the Dolphin and support boats too! Thanks for bringing us this kit. Really anxious to see what else you do. Hoping for a Butler Class Destroyer Escort. USS Tabberer would be awesome and completely overlooked in 1/350 scale.
Dave
Very exciting to see a modern USCG National Security Cutter in 1/350 scale! And one that's been in the news! Very anxious to see you you deal with some of the details on this ship such as the bridge and boat cradle/crane (or whatever they call that arrangement on the starboard side of the boat). Great to see it's coming with the Dolphin and support boats too! Thanks for bringing us this kit. Really anxious to see what else you do. Hoping for a Butler Class Destroyer Escort. USS Tabberer would be awesome and completely overlooked in 1/350 scale.
Dave
|
|
|
|
Posted: Wed Oct 30, 2019 12:40 pm |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
Black Cat wrote: Hello, and no less than four 1/350 kits ! Meow!! Ben Hi Ben ,any clue which will be those (more curious than a cat ) Cheers and keep up that good work
[quote="Black Cat"]Hello, and no less than four 1/350 kits ! Meow!! :cool_2: :whistle: Ben[/quote]
Hi Ben ,any clue which will be those :please: (more curious than a cat :big_grin: )
Cheers and keep up that good work :thumbs_up_1:
|
|
|
|
Posted: Wed Oct 30, 2019 10:36 am |
|
|
|
|
|
Post subject: |
Re: New 1/350 USCGC Bertholf WMSL-750 from Black Cat Models |
|
|
ohmigawd that thing is sexy. In November I'm putting in my first order.....
ohmigawd that thing is sexy. In November I'm putting in my first order.....
|
|
|
|
Posted: Mon Oct 28, 2019 5:48 pm |
|
|
|
|