Author |
Message |
|
|
Post subject: |
Re: I should have got one when I saw it... |
|
|
Hi Phil. That looks promising, I'll do a bit of research. Cheers
Hi Phil. That looks promising, I'll do a bit of research. Cheers
|
|
|
|
Posted: Fri Nov 10, 2017 5:03 pm |
|
|
|
|
|
Post subject: |
Re: I should have got one when I saw it... |
|
|
Dave, Have a look at these... www.sovereignhobbies.co.uk/products/inf ... ting-mat-aThey have 4 mats and are in varying styles/design options that will account for varying width of tape to cut...bu also in curves etc as well... Cheers, Phil
Dave,
Have a look at these...
http://www.sovereignhobbies.co.uk/products/infini-pe-cutting-mat-a
They have 4 mats and are in varying styles/design options that will account for varying width of tape to cut...bu also in curves etc as well...
Cheers, Phil :thumbs_up_1:
|
|
|
|
Posted: Fri Nov 10, 2017 4:50 am |
|
|
|
|
|
Post subject: |
Re: I should have got one when I saw it... |
|
|
Thanks Dp. Now I have options.
Thanks Dp. Now I have options.
|
|
|
|
Posted: Fri Nov 10, 2017 2:19 am |
|
|
|
|
|
Post subject: |
Re: I should have got one when I saw it... |
|
|
Micro Mark have one, too, but different style: https://www.micromark.com/Parallel-Cutter Hmm...almost the same.
Micro Mark have one, too, but different style: https://www.micromark.com/Parallel-Cutter Hmm...almost the same. :wave_1:
|
|
|
|
Posted: Thu Nov 09, 2017 7:07 pm |
|
|
|
|
|
Post subject: |
Re: I should have got one when I saw it... |
|
|
Yes that's it! Now I have a name for it too. Thanks EJ
Yes that's it! Now I have a name for it too. Thanks EJ
|
|
|
|
Posted: Thu Nov 09, 2017 4:09 pm |
|
|
|
|
|
Post subject: |
Re: I should have got one when I saw it... |
|
|
One of those?
https://www.etsy.com/listing/205804437/dual-cutter-knife-perfect-for-cutting
|
|
|
|
Posted: Thu Nov 09, 2017 2:57 pm |
|
|
|
|
|
Post subject: |
I should have got one when I saw it... |
|
|
Many years ago I spotted an advert (in Finescale Modeller possibly) for a craft knife with a difference. Instead of the usual scalpel blade it had two separate but parallel blades, the distance between could be adjusted. The idea was that varying widths of masking tape could be cut from your usual tape of choice. Is anybody familiar with this knife and if it is still available? Tia Dave.
Many years ago I spotted an advert (in Finescale Modeller possibly) for a craft knife with a difference. Instead of the usual scalpel blade it had two separate but parallel blades, the distance between could be adjusted. The idea was that varying widths of masking tape could be cut from your usual tape of choice. Is anybody familiar with this knife and if it is still available? Tia Dave.
|
|
|
|
Posted: Thu Nov 09, 2017 1:55 pm |
|
|
|