Author |
Message |
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Real life gets in the way sometimes!
Keep up the good work (eventually!)
Cheers, Jabb
Real life gets in the way sometimes!
Keep up the good work (eventually!)
Cheers, Jabb
|
|
|
|
Posted: Tue Apr 23, 2019 8:38 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Jabberwock wrote: Hi jason
Any update to this or any other builds?
Cheers, Jabb Hi Jabb... I'm still around, just quiet. My Hood is boxed back up and put away for the time being and I've been working on my Bismarck off and on, though I'm mostly doing other things for fun these past few months. I'm like that I guess... big bursts of progress on something between months of inactivity. I put up a crappy vid of my Bismarck progress on youtube a couple months back if you haven't seen it: https://www.youtube.com/watch?v=oX-oZJO8Mds and I started back working on the bridge superstructure section last week so there will likely be more stuff to come on that build... don't know when I'll be back on Hood but it WILL happen someday.
[quote="Jabberwock"]Hi jason
Any update to this or any other builds?
Cheers, Jabb[/quote]
Hi Jabb... I'm still around, just quiet. My Hood is boxed back up and put away for the time being and I've been working on my Bismarck off and on, though I'm mostly doing other things for fun these past few months. I'm like that I guess... big bursts of progress on something between months of inactivity. :sorry:
I put up a crappy vid of my Bismarck progress on youtube a couple months back if you haven't seen it: https://www.youtube.com/watch?v=oX-oZJO8Mds and I started back working on the bridge superstructure section last week so there will likely be more stuff to come on that build... don't know when I'll be back on Hood but it WILL happen someday. :thumbs_up_1:
|
|
|
|
Posted: Fri Apr 19, 2019 12:15 pm |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Hi jason
Any update to this or any other builds?
Cheers, Jabb
Hi jason
Any update to this or any other builds?
Cheers, Jabb
|
|
|
|
Posted: Mon Apr 15, 2019 7:37 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Jason??? What happened to all your photos? The Imjur pictures seem to have all disappeared... and thats an issue, as I wanted to see your hull (i'm in the middle of sanding everything off too... and mine is waterlined... Have you plans to use a different host (or better, upload them direct to the forum). And where are you??? I thought I posted intermittently... you are positively elusive!
Jason???
What happened to all your photos?
The Imjur pictures seem to have all disappeared... and thats an issue, as I wanted to see your hull (i'm in the middle of sanding everything off too... and mine is waterlined...
Have you plans to use a different host (or better, upload them direct to the forum).
And where are you???
I thought [i][b]I[/b][/i] posted intermittently... you are positively elusive! :big_grin:
|
|
|
|
Posted: Fri Apr 20, 2018 10:59 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Thanks,
I managed to get hold of a set of the instructions.
quality not great, but beggars can be choosers .
Thanks
Thanks,
I managed to get hold of a set of the instructions.
quality not great, but beggars can be choosers .
Thanks
|
|
|
|
Posted: Wed Jan 24, 2018 6:21 pm |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
This is the quality of my images. Some are even more unclear. I got them from another model builder.
Attachments: |
45-46b.jpg [ 174.39 KiB | Viewed 1928 times ]
|
This is the quality of my images. Some are even more unclear. I got them from another model builder.
|
|
|
|
Posted: Sat Jan 06, 2018 8:10 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Arrrrrrrrrrrrrrrgh Does have a copy of the 1/200 HMS Hood by Trumpeter instructions that thay can scan and email me please... My cat has just decided to use my instructions for a lit box.
Arrrrrrrrrrrrrrrgh
Does have a copy of the 1/200 HMS Hood by Trumpeter instructions that thay can scan and email me please... My cat has just decided to use my instructions for a lit box.
:bash_2: :Oops_1:
|
|
|
|
Posted: Fri Dec 29, 2017 1:42 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
morning all, hope you all get some hobby time in over Christmas, I have been tackleing the hawse holes and also trying to learn how to post pictures. so, with a few days off coming up, there should be some progress on both. Regards Pete
morning all, hope you all get some hobby time in over Christmas, I have been tackleing the hawse holes and also trying to learn how to post pictures. so, with a few days off coming up, there should be some progress on both. Regards Pete
|
|
|
|
Posted: Fri Dec 22, 2017 7:38 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Have just put together the boat cradles - parts 471 - 476 on Pontos fret # 7. A few months ago it was pointed out that the supports did not line up with the slots provided on the kit, hence parts 471 were of the wrong size. I decided (IMHO) that the kit supplied boats - D11 and 12 were a good fit if the cradles were constructed as is. I feel that the boats would not rest as well if installed on the rejigged part 471 (too long). I used the slot for part 473 (longer one) and filled the slot for part 476 (shorter one). Drilled out a new slot for the shorter support and dry fitted both sides with the boats installed. I am sure the desired result can be achieved without the hassle of obtaining the Pontos upgrade. I am prepared to be contradicted but more importantly, hope i have made myself clear !!!. Tim.
Have just put together the boat cradles - parts 471 - 476 on Pontos fret # 7. A few months ago it was pointed out that the supports did not line up with the slots provided on the kit, hence parts 471 were of the wrong size. I decided (IMHO) that the kit supplied boats - D11 and 12 were a good fit if the cradles were constructed as is. I feel that the boats would not rest as well if installed on the rejigged part 471 (too long). I used the slot for part 473 (longer one) and filled the slot for part 476 (shorter one). Drilled out a new slot for the shorter support and dry fitted both sides with the boats installed. I am sure the desired result can be achieved without the hassle of obtaining the Pontos upgrade. I am prepared to be contradicted but more importantly, hope i have made myself clear !!!. Tim.
|
|
|
|
Posted: Sun Dec 03, 2017 11:00 pm |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Dam, wish I'd known that a few weeks back, I did suspect that, but I went out and bought a generic rain guard set, after I sanded down the hull, it was as smooth as a baby's bottom, I also corrected the eronius (spelling) port holes/scuttles, so it's going to work out pretty well.
Insidently, I'm lighting the kit as well, so it's going to look really good.
Thanks heaps for letting me know.
Kind regards
Adrian aka Big Build
Dam, wish I'd known that a few weeks back, I did suspect that, but I went out and bought a generic rain guard set, after I sanded down the hull, it was as smooth as a baby's bottom, I also corrected the eronius (spelling) port holes/scuttles, so it's going to work out pretty well.
Insidently, I'm lighting the kit as well, so it's going to look really good.
Thanks heaps for letting me know.
Kind regards
Adrian aka Big Build
|
|
|
|
Posted: Fri Dec 01, 2017 1:10 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Big Build - those "holes" are porthole scuttles. They are spread all over the other frets. No need to "fret" anymore. (Pun intended)
Big Build - those "holes" are porthole scuttles. They are spread all over the other frets. No need to "fret" anymore. (Pun intended)
|
|
|
|
Posted: Fri Dec 01, 2017 12:40 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Hi EJF, I've just gone and looked at that website, it's a real treasure trove.
Thanks.
Still looking for what those strange un numbered parts are, I'm really thinking they are port holes, but can't find anything on the pontos instructions
Hi EJF, I've just gone and looked at that website, it's a real treasure trove.
Thanks.
Still looking for what those strange un numbered parts are, I'm really thinking they are port holes, but can't find anything on the pontos instructions
|
|
|
|
Posted: Thu Nov 30, 2017 7:19 pm |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
To any of you and Mr Pontos... I got my second fret 5 a couple of weeks ago, and I'm going hell for leather on the funnels as I type this... The wrap around sheet for the funnels is awesome, and fits perfectly with my scratch built correction for the rear funnel error that Trumpeter decided to throw the curve ball in...
My Question is... looking at fret 5, I see a number of "parts" that don't have numbers next to them, and they are jammed in everywhere... they are round, and almost look like port holes, there are 12 of them in between parts 404 and 402 at the top left of fret 5 alone...
if anybody has any idea what these are, I'd be appreciated.
Cheers
Adrian ... aka Big Build
To any of you and Mr Pontos... I got my second fret 5 a couple of weeks ago, and I'm going hell for leather on the funnels as I type this... The wrap around sheet for the funnels is awesome, and fits perfectly with my scratch built correction for the rear funnel error that Trumpeter decided to throw the curve ball in...
My Question is... looking at fret 5, I see a number of "[i]parts[/i]" that don't have numbers next to them, and they are jammed in everywhere... they are round, and almost look like port holes, there are 12 of them in between parts 404 and 402 at the top left of fret 5 alone...
if anybody has any idea what these are, I'd be appreciated.
Cheers
Adrian ... aka Big Build
|
|
|
|
Posted: Tue Nov 28, 2017 8:27 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Actually, there's a fair bit of info on the Hood website
Actually, there's a fair bit of info on the Hood website :smallsmile:
|
|
|
|
Posted: Mon Nov 27, 2017 9:51 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
OH! Thanks EJF... nice pix there.
Regarding the booms and colour, most things like this where painted the hull colour.
My Hood is based some time between March 1940 and Oct 1940, as beyond this date, there is not much clear info of what was what on her.
OH! Thanks EJF... nice pix there.
Regarding the booms and colour, most things like this where painted the hull colour.
My Hood is based some time between March 1940 and Oct 1940, as beyond this date, there is not much clear info of what was what on her.
|
|
|
|
Posted: Mon Nov 27, 2017 9:49 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
http://ontheslipway.com/?p=1607
|
|
|
|
Posted: Mon Nov 27, 2017 9:03 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
What do you plan to do regarding booms? She had one big one 50ft on the hull, and 3 smaller ones stowed on the superstructure. Got any good detail info on those and their location on May 22 in battle in 1941? They moved rafts in part as well and thats known but the booms on the hull sides I wonder about... also their color / gray or wood. if wood / what color... You research the ship, you must know this. Im at that stage on my 1/700 and wondering what to do next.
What do you plan to do regarding booms? She had one big one 50ft on the hull, and 3 smaller ones stowed on the superstructure. Got any good detail info on those and their location on May 22 in battle in 1941? They moved rafts in part as well and thats known but the booms on the hull sides I wonder about... also their color / gray or wood. if wood / what color... You research the ship, you must know this. Im at that stage on my 1/700 and wondering what to do next.
|
|
|
|
Posted: Mon Nov 27, 2017 8:55 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Yeah, they are different, they just look really out of scale... I'll see what they look like once painted.
Todays update.
I'm working on the fore and aft funnels to make them the correct size, as per Grizly's post, I've got the two funnels done, just workin on the base... should be done v v soon (thats what I said 3 hours ago.
Yeah, they are different, they just look really out of scale... I'll see what they look like once painted.
Todays update.
I'm working on the fore and aft funnels to make them the correct size, as per Grizly's post, I've got the two funnels done, just workin on the base... should be done v v soon (thats what I said 3 hours ago.
|
|
|
|
Posted: Mon Nov 27, 2017 7:48 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
Those are the pump discharges _ was referring too; there's a bunch of them and yes, port side and starboard are different.
Those are the pump discharges _ was referring too; there's a bunch of them and yes, port side and starboard are different.
|
|
|
|
Posted: Mon Nov 27, 2017 7:10 am |
|
|
|
|
|
Post subject: |
Re: 1/200 Trumpeter HMS Hood + Pontos Detail Set |
|
|
The holes I am talking about appear in this October 1940 photo where Hood is getting her Home Fleet Grey (AP507B)... OMG I've just found out when she went from Light Grey to dark grey... I digress. If you look just above the water line (above her black boot), you can see a number of what appear to be drain holes. Attachment:
drains.png [ 316.58 KiB | Viewed 2822 times ]
The holes I am talking about appear in this October 1940 photo where Hood is getting her Home Fleet Grey (AP507B)... OMG I've just found out when she went from Light Grey to dark grey... I digress.
If you look just above the water line (above her black boot), you can see a number of what appear to be drain holes.
[attachment=0]drains.png[/attachment]
|
|
|
|
Posted: Mon Nov 27, 2017 5:55 am |
|
|
|