Author |
Message |
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Very nice, the sea looks very good too, a dynamic presentation.
LL
Very nice, the sea looks very good too, a dynamic presentation.
LL
|
|
|
|
Posted: Tue May 03, 2011 4:46 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
joedunlap wrote: Outstanding build Phil! I wish I could get em done even 1/3 as fast. I would suspect that moving that fast sort of feeds on itself. The instant gratification drives one to do even more, faster. At any rate I have a question. In the photos, the hull plating lines seem to be overly thick. What are your thoughts on this, and if one wanted to sand them down a bit, is the material soft enough to make that feasible?
Again, just a terrific build! You did her proud!
Joe Dunlap Hi Joe , Many thanks for the comments,yup ,I was tempted to sand down the plating lines,I think Hasegawa have over done them,but it may have created more problems than it solved.I have to maintain a fast building rate ,its in my nature,if I slow up ,I seem to get bogged down,which slows me up even more.It`s a bit like riding a bicycle ,keep pedalling or fall off!! Cheers Phil
[quote="joedunlap"]Outstanding build Phil! I wish I could get em done even 1/3 as fast. I would suspect that moving that fast sort of feeds on itself. The instant gratification drives one to do even more, faster. At any rate I have a question. In the photos, the hull plating lines seem to be overly thick. What are your thoughts on this, and if one wanted to sand them down a bit, is the material soft enough to make that feasible?
Again, just a terrific build! You did her proud!
Joe Dunlap[/quote] Hi Joe , Many thanks for the comments,yup ,I was tempted to sand down the plating lines,I think Hasegawa have over done them,but it may have created more problems than it solved.I have to maintain a fast building rate ,its in my nature,if I slow up ,I seem to get bogged down,which slows me up even more.It`s a bit like riding a bicycle ,keep pedalling or fall off!!
Cheers Phil
|
|
|
|
Posted: Sat Apr 16, 2011 1:26 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Outstanding build Phil! I wish I could get em done even 1/3 as fast. I would suspect that moving that fast sort of feeds on itself. The instant gratification drives one to do even more, faster. At any rate I have a question. In the photos, the hull plating lines seem to be overly thick. What are your thoughts on this, and if one wanted to sand them down a bit, is the material soft enough to make that feasible?
Again, just a terrific build! You did her proud!
Joe Dunlap
Outstanding build Phil! I wish I could get em done even 1/3 as fast. I would suspect that moving that fast sort of feeds on itself. The instant gratification drives one to do even more, faster. At any rate I have a question. In the photos, the hull plating lines seem to be overly thick. What are your thoughts on this, and if one wanted to sand them down a bit, is the material soft enough to make that feasible?
Again, just a terrific build! You did her proud!
Joe Dunlap
|
|
|
|
Posted: Fri Apr 15, 2011 8:30 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
:thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: Man Phil you are fast.
|
|
|
|
Posted: Wed Mar 30, 2011 6:52 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
She looks good from here Thank you Phil for the build and review, it was very informative.
She looks good from here :thumbs_up_1: Thank you Phil for the build and review, it was very informative.
|
|
|
|
Posted: Wed Mar 30, 2011 12:07 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 Finished!! |
|
|
These are pics of the completed model,I will take some more pics when the light is better.Is the kit worth the £230 ? I don`t think so,if Hasegawa decide to produce another Allied vessel ,I shall have to think long and hard as to whether I`ll buy it.Nevertheless I enjoyed building it,and I`m please with the result . cheers Phil
These are pics of the completed model,I will take some more pics when the light is better.Is the kit worth the £230 ? I don`t think so,if Hasegawa decide to produce another Allied vessel ,I shall have to think long and hard as to whether I`ll buy it.Nevertheless I enjoyed building it,and I`m please with the result .
cheers Phil
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/RSCN0992.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0996.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0994.jpg[/img]
|
|
|
|
Posted: Tue Mar 29, 2011 2:12 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
The cameras working again,so here is a pic of the FM-2`s,and also one of the Hasegawa TBF`s,which took about an hour to make,the parts in my example had a very bad fit,also there were no location tabs for the horizontal tailplanes,only a vague raised part ,which was as much use as a chocolate fireguard.I think they are also overscale ,but I`ll have to check that out. Cheers Phil
The cameras working again,so here is a pic of the FM-2`s,and also one of the Hasegawa TBF`s,which took about an hour to make,the parts in my example had a very bad fit,also there were no location tabs for the horizontal tailplanes,only a vague raised part ,which was as much use as a chocolate fireguard.I think they are also overscale ,but I`ll have to check that out.
Cheers Phil
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0984.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/RSCN0986.jpg[/img]
|
|
|
|
Posted: Tue Mar 29, 2011 4:40 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
she looks good. keep up the good work!
she looks good. keep up the good work!
|
|
|
|
Posted: Mon Mar 28, 2011 7:32 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Looking forward to that, Phil - do I assume correctly that it's mainly due to proportions/scaling, rather than details and construction?
Looking forward to that, Phil - do I assume correctly that it's mainly due to proportions/scaling, rather than details and construction?
|
|
|
|
Posted: Mon Mar 28, 2011 2:39 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Timmy C wrote: Curious about what makes the Hasegawa planes inferior - can you elaborate more? I`ve got one of the Hasegawa TBF`s partly built ,when my cameras back in action ,I will post a pic,to my mind they didn`t look right! Cheers Phil
[quote="Timmy C"]Curious about what makes the Hasegawa planes inferior - can you elaborate more?[/quote]
I`ve got one of the Hasegawa TBF`s partly built ,when my cameras back in action ,I will post a pic,to my mind they didn`t look right!
Cheers Phil
|
|
|
|
Posted: Mon Mar 28, 2011 2:28 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Curious about what makes the Hasegawa planes inferior - can you elaborate more?
Curious about what makes the Hasegawa planes inferior - can you elaborate more?
|
|
|
|
Posted: Mon Mar 28, 2011 2:22 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Looking just fantastic! The speed at which you build is mind boggling, I wish I could build at 1/10th the speed you do.
Matt
Looking just fantastic! The speed at which you build is mind boggling, I wish I could build at 1/10th the speed you do.
Matt
|
|
|
|
Posted: Mon Mar 28, 2011 2:20 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
I was not impressed with the TBF`s included in the kit,luckily I had a pack of Trumpeter TBF`s ,which I bought many years ago .When built these looked much better than the Hasegawa offerings.For the FM-2`s I did use the kit ones ,and ,again I wasn`t impressed ,but I used them anyway.Before I could take a photo if them my camera`s battery was exhausted,so I will add a pic of them latter. On the last lap now! Cheers Phil
I was not impressed with the TBF`s included in the kit,luckily I had a pack of Trumpeter TBF`s ,which I bought many years ago .When built these looked much better than the Hasegawa offerings.For the FM-2`s I did use the kit ones ,and ,again I wasn`t impressed ,but I used them anyway.Before I could take a photo if them my camera`s battery was exhausted,so I will add a pic of them latter. On the last lap now!
Cheers Phil
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/RSCN0983.jpg[/img]
|
|
|
|
Posted: Mon Mar 28, 2011 2:16 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
:thumbs_up_1: :thumbs_up_1:
Bob Pink. :wave_1:
|
|
|
|
Posted: Sat Mar 26, 2011 6:31 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
I looked at the model ,and said to myself, "good grief this is nearly finished" ,I didn`t realise how far on I had got .I`ve added the 20mm and 40mm`s to the F/D sides .I didn`t use the the PE for the 20mms,as I`m not a PE "Maestro", nor did I use the Hsaegawa PE for the 40`s,instead I used some from L`Arsenal,which was much easier for this ham-fisted old fool to use.All (ALL!)that remains is the aircraft ,and many little details to be added to the ship ,and of course the crew members ,along with the rigging ,what there is . Cheerio for now ,Phil
I looked at the model ,and said to myself, "good grief this is nearly finished" ,I didn`t realise how far on I had got .I`ve added the 20mm and 40mm`s to the F/D sides .I didn`t use the the PE for the 20mms,as I`m not a PE "Maestro", nor did I use the Hsaegawa PE for the 40`s,instead I used some from L`Arsenal,which was much easier for this ham-fisted old fool to use.All (ALL!)that remains is the aircraft ,and many little details to be added to the ship ,and of course the crew members ,along with the rigging ,what there is . Cheerio for now ,Phil [img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/RSCN0981.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0978.jpg[/img]
|
|
|
|
Posted: Sat Mar 26, 2011 5:13 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Yup,Bob ,its amazing what can get done ,when you have a couple of days off work!! You can see I haven`t been wasting my time. The island is almost finished ,I don`t like the large radar (SK?) aerial from Hasegawa`s PE very much,I may consider replacing it with something from WEM.I`ve started detailing the F/D ,just used black stretched-sprue for the arrester wires and crash-barriers,it was a whole lot easier that way ,rather than using the PE option See you,Phil
Yup,Bob ,its amazing what can get done ,when you have a couple of days off work!! You can see I haven`t been wasting my time.
The island is almost finished ,I don`t like the large radar (SK?) aerial from Hasegawa`s PE very much,I may consider replacing it with something from WEM.I`ve started detailing the F/D ,just used black stretched-sprue for the arrester wires and crash-barriers,it was a whole lot easier that way ,rather than using the PE option See you,Phil
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0974.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0976.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0977.jpg[/img]
|
|
|
|
Posted: Thu Mar 24, 2011 3:18 pm |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Wow Phil! You are a building machine!! :thumbs_up_1: :thumbs_up_1:
Bob Pink. :thumbs_up_1: :thumbs_up_1:
|
|
|
|
Posted: Thu Mar 24, 2011 11:58 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
The construction of the island is proceeding,I`ve used a combination of PE and plastic parts from the kit,as some of the PE bits are a bit beyond me!! I`ve removed the fore and aft S/light platforms to the correct location on the mast ,as I attached these too high orginally. Bye Phil
The construction of the island is proceeding,I`ve used a combination of PE and plastic parts from the kit,as some of the PE bits are a bit beyond me!! I`ve removed the fore and aft S/light platforms to the correct location on the mast ,as I attached these too high orginally.
Bye Phil
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0973.jpg[/img]
[img]http://i273.photobucket.com/albums/jj217/philreeder/Guadalcanal/DSCN0971.jpg[/img]
|
|
|
|
Posted: Thu Mar 24, 2011 5:45 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
The Vallejo conversion chart is here: http://www.ipmsswamp.com/files/VallejoW ... alents.pdfMany thanks to IPMS USA South West Area Modelers Society ! They have done a great job!! Regards Phil
The Vallejo conversion chart is here:
http://www.ipmsswamp.com/files/VallejoWWIINavalColorEquivalents.pdf
Many thanks to IPMS USA South West Area Modelers Society ! They have done a great job!!
Regards Phil
|
|
|
|
Posted: Wed Mar 23, 2011 11:48 am |
|
|
|
|
|
Post subject: |
Re: USS Guadalcanal CVE-60 |
|
|
Which IPMS chapter did you check out for the paint chart you used?
I might like to give it a look.
Which IPMS chapter did you check out for the paint chart you used?
I might like to give it a look.
|
|
|
|
Posted: Wed Mar 23, 2011 10:36 am |
|
|
|
|