The Ship Model Forum

The Ship Modelers Source
It is currently Fri Mar 29, 2024 8:09 am

All times are UTC - 6 hours [ DST ]




Post a reply
Username:
Subject:
Message body:
Enter your message here, it may contain no more than 60000 characters. 

Smilies
:smallsmile: :wave_1: :big_grin: :thumbs_up_1: :heh: :cool_1: :cool_2: :woo_hoo:
View more smilies
Font size:
Font colour
Options:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Disable BBCode
Disable smilies
Do not automatically parse URLs
Question
type everything in between the quote marks: "N0$pam" Note the Zero:
This question is a means of preventing automated form submissions by spambots.
   

Topic review - Lindberg 1/125 LCT-592
Author Message
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Fantastic Dave! Glad that some of the photos and the video brought back memories for him. Happy New Year!

Dave
Redfield, Ark.
Post Posted: Tue Dec 28, 2021 10:15 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
dhenning wrote:
David,
That is wonderful that your father is still with us. I hope he enjoys the photos of his old ship. You might scroll up on this page and find the link to the videos of his ship as well that I found after my project was done. Merry Christmas and please thank your father for his service.

David Henning

David- My Dad watched the video and saw your model and was blown away! He had no idea these things could be found on line. The stories started coming out like a light bulb went again! Thank you so much. I emailed JEM (another poster in your thread) whose Dad also served on the 592. Hoping to correspond with him soon. Dave Naske
Post Posted: Mon Dec 27, 2021 1:10 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
David,
That is wonderful that your father is still with us. I hope he enjoys the photos of his old ship. You might scroll up on this page and find the link to the videos of his ship as well that I found after my project was done. Merry Christmas and please thank your father for his service.

David Henning
Post Posted: Sun Dec 26, 2021 10:38 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Very cool. My Dad served aboard lct 592 for a year, including the Utah beach landing. He is still with us, here in Florida. I will definitely show him your post. Thanks! David Naske
Post Posted: Sat Dec 25, 2021 7:16 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
JEM wrote:
David — Thanks for the explanation. It’s really fortunate that you found those sources because there are several books and web sites that incorrectly state that the 592 was sunk. LCT(6)-592 was the lead craft in the first wave on Tare Green at Utah. I believe it was the 593 in my dad’s group that hit a mine and sank, losing its tanks and much of the LCT crew and tank crews. (Eventually) I will post a list of other books and sites for reference on LCTs and some more info on the 592 specifically.

I actually have the ship’s log that covers before and after D-Day and a 1928 $2 bill with the crew names and landing info my dad wrote on it, and a couple of photos and other things. I don’t want to post photos of them publicly yet because I am arranging to donate them to the WWII museum and I don’t want them getting out first. When that is settled I can hopefully supply those to you for your display.

Later. ~Jack



Jack,
Just wanted to take the time to remember your father's service and those who were lost during the greatest naval invasion in history, and one of the most important dates in history as well. Sad to not see a lot of posts remembering this day in history.

Dave
Post Posted: Sun Jun 06, 2021 7:51 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Okay, I've waited a few weeks and have seen others post their awards from the Nationals. Very honored to report that the LCT-592 won first place for Scratchbuilts and Conversions-All Scales! Thanks again to everyone on the forum who takes the time to answer questions and search their reference materials for some of our obscure questions!

Even more exciting to me is that FSM wanted to take pics of my LCI(G)-449 at the Nationals as well! Hope to see it in one of the Nationals Galleries in the future!

Thanks again to the gang at Chattanooga. Great show, great vendor rooms, great seminars!

David
Post Posted: Tue Sep 03, 2019 8:40 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Jack,
Just stumbled across this video that was posted on Critical Past in December. You can order the video or prints. As always, modelers usually find the best photos or resources on their subject AFTER they finish the project!

https://www.criticalpast.com/video/65675069829_invasion-of-Normandy_Landing-Craft-Tank_United-States-troops_laying-mats

Dave
Post Posted: Sun Jun 23, 2019 7:16 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Jack,
Sounds great. Look forward to seeing what ever you would like to share. Hopefully the photos don't contradict any of the assumptions that I made with my 592 model! (It always seems that you find that elusive, detailed photo of the subject AFTER you finished the model.

Will be taking her to Scalefest in Grapevine, TX in a couple of weeks. Wish me luck!

Dave
Post Posted: Sun May 19, 2019 9:59 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
David — Thanks for the explanation. It’s really fortunate that you found those sources because there are several books and web sites that incorrectly state that the 592 was sunk. LCT(6)-592 was the lead craft in the first wave on Tare Green at Utah. I believe it was the 593 in my dad’s group that hit a mine and sank, losing its tanks and much of the LCT crew and tank crews. (Eventually) I will post a list of other books and sites for reference on LCTs and some more info on the 592 specifically.

I actually have the ship’s log that covers before and after D-Day and a 1928 $2 bill with the crew names and landing info my dad wrote on it, and a couple of photos and other things. I don’t want to post photos of them publicly yet because I am arranging to donate them to the WWII museum and I don’t want them getting out first. When that is settled I can hopefully supply those to you for your display.

Later. ~Jack
Post Posted: Sun May 19, 2019 10:49 am
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
JEM,
Thank you for the compliments and thank you for your father's service. No, no connection to the 592. Since your not a modeler, I will give you the brief history of how I decided to build the 592 (other modelers will find the story familiar).

I received the LCT/LCU kit from my former brother in law and sister in law many years ago for Christmas. I started looking into the use of LCTs at Normandy at that time and decided that I wanted to model one that landed tanks at Normandy, but didn't find a lot of info at the time (I believe back then I was actually using WebTV). Fast forward many years later and after building a LCI(G) from the Lindberg LCI kit, I decided to dig out the LCT kit and maybe have a go at it. As most modelers do, this entailed purchasing/locating as many reference books as you can find on the subject (normally well in excess of the cost of the initial kit). I found one of the only books specifically about LCTs, "The LCT Story, Victory in Europe Plus the Letters of a Young Ensign", by William Baker. The book mentioned that LCTs were built at Pidgeon-Thomas Ironworks in Memphis, TN-right across the river from my home state and a town that I know pretty well. It also related the story of two young LCT officers that went to Memphis for Navy Day after the war on board their new assignment-a LST. An older gentlemen touring the ship asked them if they knew anyone who had served on LCTs. Turned out the individual was the owner of the Pidgeon-Thomas Ironworks and he was delighted to meet two men who served on his ships and he treated them to the best that Memphis had to show his appreciation to them. I was sold on building an LCT from that company.
I then found out that Pidgeon-Thomas built only the Mark 6 LCTs and then started researching further on-line and in Mr. Baker's book to find which Mark 6s built in Memphis were at Normandy. That in turn led to narrowing the field down to ones that were used to land the DD tanks successfully, which narrowed it down further. I also used the photographs available on Navsource.org to try to find good photos to use as references. Then I stumbled across the oral history of the Officer in Charge of the 592 at Utah Beach at this website : https://oralhistory.rutgers.edu/intervi ... -charles-w and decided that was the ship that I would portray with my model.
A long story, but the journey of many scale modelers in looking for the right ship in history to portray. Would love to see any information that you have on the 592 to include in my displays at upcoming model shows.

David
Post Posted: Sun Apr 14, 2019 7:01 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Can I ask what prompted you to use 592 as the hull number? The reason I ask is because my dad was a MoMM2 on LCT-592 during the invasion (and then on a different LCT in the invasion of Okinawa in 1945) Do you have a personal connection to it? If so, I probably have some information you’d be interested in.

I have several versions of that Lindberg LCT/LCU kit but I haven’t yet tried to assemble one. I’m not a model builder and I’d probably be challenged just following the basic instructions in the box. What you did is fantastic—a work of art. Thank you for sharing it.
Post Posted: Sat Apr 13, 2019 11:52 am
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Thanks for the response Dave and DavidP! I have found dozens of photos and articles concerning LCFs but not a lot of close-up, detail photos. I've found a few line drawings but not very useful. I know the LCFs were converted from LCTs and the U.S. Navy got their LCFs back from the RN prior to D-Day. Based on the few photos I've seen, there seems to be some modifications done after the USN received their LCFs back from the RN. Any photos of RN LCFs may not help me with the USN version. Looks like I have a lot more research to do.

I'll post further questions and info on the Amphibious, Transports and Auxiliaries Forum. Thanks again!
Bobby
Post Posted: Sun Feb 24, 2019 9:40 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
LCF-31,
Thanks for the comments. In all my research that I did for my LCT, I have to admit that I missed the conversion to the LCF. Wow, those were impressive! It looks like it is modified from a Mark 5 LCT, which did not have the drive through deck like the Mk. 6 that I built. It might actually be easier to build a Mark 5 from the Lindberg kit rather than a Mark 6, but I don't have any plan sheets to compare the Mark 5 and the LCF. I'll be happy to provide any sources or items that I used for your project.

Good luck and it looks like it will be a very inspirational build!
Dave

PS DavidP -thanks for the link to the LCF photos. Again, I missed those when researching my build for a Mark 6.
Post Posted: Sat Feb 23, 2019 11:49 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Outstanding work Dave! I found this post while doing research on modeling a LCF. When I found this forum I immediately joined. I mostly build nascar race cars (I'm also a member of Randy Ayers Nascar Model Forum.) I occasionally build military models and enjoy the change of pace from race cars.

I'm wanting to build a LCF (Landing Craft Flak) from D-Day using the same Lindberg kit you used. Don't really know what I'm getting into since I haven't built a ship in years. Any help from you or anyone that would help me get started with this project would be greatly appreciated! I'm in no hurry on this project. It may take months of more research before I have everything I need. Really just need the basics on just what I will need as far as kit(s), aftermarket parts, etc. I'll probably be asking more detailed questions as I get further into this build.

Why a LCF? My great uncle SM1c Thomas L. Spidle (my maternal grandmother's baby brother) was killed in action serving on LCF-31 on D-Day. Can't think of a better project to get back into ship model building. Thanks all!
Post Posted: Sat Feb 23, 2019 9:14 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Thanks Story! Have been following along some of your builds as well. Any updates on the Rum Runners?
Post Posted: Mon Feb 18, 2019 8:04 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Nice job on the model and base as well.
Post Posted: Mon Feb 18, 2019 3:33 am
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Thank you Scott!
Post Posted: Wed Jan 23, 2019 10:56 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
:thumbs_up_1: Great Work! :thumbs_up_1:

Scott
Post Posted: Sun Jan 20, 2019 7:37 am
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
Thank you for the comments! Forgot that the back half of the deck of the LCT?LCU kit had to be cut off and a flat deck constructed. The Lindberg kit has a large step for the superstructure across the entire width of the hull and about 1/4 of it's length.

Steve-thanks for the great ready service lockers and life rings. Looking forward to trying out your new printing material.

Dave
Post Posted: Sat Jan 19, 2019 6:13 pm
  Post subject:  Re: Lindberg 1/125 LCT-592  Reply with quote
:big_grin:


Attachments:
j0j903N.jpg
j0j903N.jpg [ 32.17 KiB | Viewed 4799 times ]
Post Posted: Fri Jan 18, 2019 5:52 pm

All times are UTC - 6 hours [ DST ]


Jump to:  
Powered by phpBB® Forum Software © phpBB Group