The Ship Model Forum

The Ship Modelers Source
It is currently Fri Mar 29, 2024 6:36 am

All times are UTC - 6 hours [ DST ]




Post a reply
Username:
Subject:
Message body:
Enter your message here, it may contain no more than 60000 characters. 

Font size:
Font colour
Options:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are OFF
Disable BBCode
Do not automatically parse URLs
Question
What is the name in the logo in the top left? (hint it's something dot com):
This question is a means of preventing automated form submissions by spambots.
   

Topic review - Modern USN Battleship
Author Message
  Post subject:  Re: Modern USN Battleship  Reply with quote
Here is the question:

Should it be a modernized Iowa with helo capabilities?

Should it be a Montana with helo capabilities?
Post Posted: Sat Oct 30, 2021 7:07 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
SeaMasterMax wrote:
Amoung all the comments i red down below this pic, no-one has ever considered that stability matters are to be primary in this
condition: turrets are heavy and ammunition compartments too. Additionally to so, the ship's is not large enough to support a proper stability that's why, when even a merchant vessel is enlonged, width compensation factor need to be applied by constrcting a floatong belt
along the floating plan. Without this, the vessel may capsize even when touching the water for the first time after launching.
This happened even with sailing man-of-war wasa, check it out on the internet.

Certainly understood. The dimensions of mine would be approximately 900'x106' and draw approximately 32'; nothing like SeaMasterMax's sketch-up.
Post Posted: Wed Jul 28, 2021 2:25 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
Admhawk wrote:
I still like my idea,
Image


Amoung all the comments i red down below this pic, no-one has ever considered that stability matters are to be primary in this
condition: turrets are heavy and ammunition compartments too. Additionally to so, the ship's is not large enough to support a proper stability that's why, when even a merchant vessel is enlonged, width compensation factor need to be applied by constrcting a floatong belt
along the floating plan. Without this, the vessel may capsize even when touching the water for the first time after launching.
This happened even with sailing man-of-war wasa, check it out on the internet.
Post Posted: Thu Jul 08, 2021 9:53 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
I have a kit in hand. I have begun assembling. I have cut the hull, and I am cutting the plugs to lengthen it. This will be great.
Stand by to get some. :woo_hoo:
Post Posted: Mon Jan 06, 2020 4:34 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
DavidP wrote:
how much does the blisters widen the model...
The blisters will only reach out slightly wider than the deck edge. Because the base hull angles inward from the waterline, I will need more material on the sides down to the bottom. I'm going to wind up making her a flat bottom ship like other battleships, so there will be a lot of modifying!

I like the foam idea. I will have to get some and try it out. First, I need to sand the sides smooth, then lengthen and widen her.

Thanks for the input!

-Dave :big_grin:
Post Posted: Sun Jul 08, 2018 7:00 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
Depending on how complex it is, you could get some dense foam, like the pink or blue insulation at the hardware store, carve to shape and skin with 10 thou styrene.
Post Posted: Thu Jul 05, 2018 6:53 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
In my off time, I have been working on how I will work this hull. The length and width dimensions, I know, but the method is a little shaky. I think I will run an exacto knife down the keel and split the hull. Then I will saw it down the beam to then insert a plug. After the plug, I will work the Littorio-style layered armor belt and then the real challenge: The torpedo blister! :scratch:

Unlike my previous builds, I will finish the hull before I begin with the super structure.

How do some of you guys suggest Ii make a torpedo blister? Thanks so much for the inputs! :heh:
Post Posted: Thu Jul 05, 2018 8:56 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
David,
DavidP wrote:
what is your base model & is it a 2 piece hull split vertically or horizontally?

It’s the 1/350 Kirov hull. I will cut it into 3 pieces. The first piece will be across the middle abeam with a cut about 1/2 the length toward the bow without bicecting it. The stern will be cut in half down the keel making two pieces. Then I will be able to widen the ship with ease and lengthen it with a little effort and careful reassembly.

The next thing after that will be tackling the main deck with helo hangars, stern notch, and stern boat deck.
:woo_hoo:
Post Posted: Mon Jun 18, 2018 7:17 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
Since I have the hull I want to use, I now have to make it meet the requirements I need. I will have to lengthen it by 2.5" and widen it by .5" The lengthening will be the challenge. Keeping it together and consistent will be the real work. The main deck will be the first real set of work, and then building up the torpedo bulge will be the next! Goodness!
Post Posted: Thu Jun 14, 2018 4:40 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
carr wrote:
Admhawk, I'm going to extend you the courtesy of one free pass while I wait to see if the moderators deal with you.


Bob you should be more concerned about how we deal with you. It looks to me like the insults began with you. So I'm going to extend you the courtesy of one free pass while I wait and see if you can learn to play nice with others.
Post Posted: Tue Jun 12, 2018 4:01 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
..
Post Posted: Mon Jun 11, 2018 10:21 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
..
Post Posted: Mon Jun 11, 2018 9:01 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
Bob, why are you such a jerk towards other people? It really is disrespectful to Dave's thread when you act like you are superior to others in such a churlish and immature way.

You accuse others of pointless arguing, and can't even get the facts correct while you demean them in public.
You call others childish, yet you try and bully them to stick to some random set of rules you've made up regarding what a discussion is.
You think you're always right, yet accuse others of acting that way.

At first, I thought maybe it was me, but after seeing how you talk to others, I realize the problem is you.

You need to be called out every time you display boorish behavior, until you change your ways.

BTW, Grownups aren't threatened by challenges to their ideas as long as they are well thought out and defensible. Hmmm, might even be a discussion.
Post Posted: Sun Jun 10, 2018 10:40 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
Base model is in hand. 16” turrets are in hand, 155mm/52caliber mounts and barrels are in hand. Now it’s time to lengthen and widen this bad boy. We’re looking at 2.5” in length and widen her by .4”

After the spacers, then the armor belt needs to go on, and the notched stern needs to be lengthened by about an inch. Easy day!
Post Posted: Sun Jun 10, 2018 5:31 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
..
Post Posted: Sun Jun 10, 2018 12:34 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
..
Post Posted: Sun Jun 10, 2018 12:32 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
The Iowas rarely (never?) engaged in shore bombardment.

You should check that. Missouri bombarded Iwo Jima, Okinawa, and the Japanese home islands during WWII. I'm sure the others were used as well.
Post Posted: Sun Jun 10, 2018 11:04 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
..
Post Posted: Sun Jun 10, 2018 8:33 am
  Post subject:  Re: Modern USN Battleship  Reply with quote
I just received the base model for this project and some pieces from shapeways. I am really excited about this. While work is getting busy and hectic, we will continue the discussion.

I especially want to focus on:
- Armor (especially missile defense)
- Torpedo defense system
- Armament
- Air facilities for UAVs and occasional air det
- Sensors
- Propulsion type
- Brass etch set
- Boat storage and boat type
- Embarked Marines? For what purpose?
- Paint scheme
- Use of wood on the deck
- The first reliable use of non legacy (SPS-48/49) air search radars but retaining the SPQ-9
Attachment:
F4A1C8FB-6064-4313-980D-59DAFEC57F4B.jpeg
F4A1C8FB-6064-4313-980D-59DAFEC57F4B.jpeg [ 65.62 KiB | Viewed 2532 times ]

Attachment:
6C8576D6-8EFA-486F-8FEC-148E18B780BB.jpeg
6C8576D6-8EFA-486F-8FEC-148E18B780BB.jpeg [ 95.65 KiB | Viewed 2532 times ]


...and this will all be dictated by mission set. What kind of mission should a modern day battleship execute? We will do the opposite of what the Navy does and actually dictate a mission FIRST and then configure a platform to meet that mission with room to grow.
Post Posted: Sat Jun 09, 2018 9:51 pm
  Post subject:  Re: Modern USN Battleship  Reply with quote
EJM wrote:
DavidP wrote:
I thought it was a cross between a Burke & an Iowa.


Or a Burke, Iowa, and HMS Daring.
An incredible 3some.
Post Posted: Fri Jun 08, 2018 7:35 pm

All times are UTC - 6 hours [ DST ]


Jump to:  
Powered by phpBB® Forum Software © phpBB Group