The Ship Model Forum

by **Timmy C** » Mon Jun 27, 2016 5:54 pm

Toysbizz, please see this post by Pontos: viewtopic.php?f=16&t=90724&start=140#p694317

by **toysbizz** » Mon Jun 27, 2016 3:49 am

Hello Mr. Kim of Pontosmodel,

I am a big fan of your products.
I have been trying to contact without any success. Got no reply until now to all the e-mails i have sent you.
Do you have any distributor for Europe?
Many thanks!
Best regards!
Francisco

by **Giampiero** » Sat Oct 29, 2011 3:01 pm

received the decks of Roma

by **ceefood** » Wed Oct 12, 2011 7:09 pm

I will add my thanks for great work Kim & letting us know here about your products

couple of questions for you -

I read a post saying

All our Deck products included Black Anchor chain(about 20cm long). This black is matt and hard to scratch

I looked on your website but there is no mention of included chain - so do you provide chain for your wooden decks especially the musashi one?
can I get extra chain as well if I would like? if yes how much?

it looks like the deck is in a complete sheet & cut through then stained for the areas of model required but no the excess. am I correct with this & if so can the excess be stained the same please if I wanted -reason I am looking to modify a kit & will need extra wood for the deck that is not included/needs to be modified - eg removing some AA gun mounts so will need wooden deck there to replace it

will you be doing barrels for Yamato?

look forward to your response

by **gott_cha** » Thu Sep 01, 2011 8:00 am

very nice!

would love to see the 14'' barrels for the Pennsy/Arizona class. Any plans to do those my friend?

by **Pagodaphile** » Tue Aug 30, 2011 11:23 pm

I just noticed Dylan's photos of your 1/350 Independence deck. Great! Will you be doing these also for 1/700, say for a CVL-24 Belleau Wood ?

by **dylan** » Tue Aug 30, 2011 7:42 am

love your stuff!! just got the deck for Independence, fantastic.
any chance of seeing decks for Mikasa and Fuso? in 1/350

by **Pontosmodel** » Fri Aug 12, 2011 11:27 am

Hi All,
Here is 1/350 Warspite 15in Barrel design.
Can you see the 4step ribs on the front face?
This is just fit only for Academy Warspite Blastbags.

Thank you
Kim

by **Pontosmodel** » Thu Aug 11, 2011 10:45 am

Hi All
I've just finished the editing of New Jersey 1982 manual.

This set also includes Stern deck with PE and Dry Transfer for helicopter landing markings.

1/350 Roma, Richelieu and Hood were also developed and waiting for Manual editing.

Thank you
Kim

by **Pontosmodel** » Thu Aug 11, 2011 10:40 am

JTninja wrote:Hopefully you'll get into the 1/700 series, its a good sized market being usually cheaper to build. From what Ive seen, your decks look fantastic. If I ever get into 1/350, I know where to get my decks

Already 9 BBs of 1/700th have been developed and just waiting for manual printing.
I also hope you can meet us again at 1/350 soon.
Thank you
Kim

by **JTninja** » Tue Aug 09, 2011 6:34 pm

Hopefully you'll get into the 1/700 series, its a good sized market being usually cheaper to build. From what Ive seen, your decks look fantastic. If I ever get into 1/350, I know where to get my decks

by **Pontosmodel** » Tue Aug 09, 2011 12:06 am

mermaid1 wrote:It would be nice to get wood deck for armored cruiser Varyag 1:350 (Zvezda), for Revell Great Eastern, cruiser Emden, Hobby Boss Italian cruiser Pola 1:350.
Nobody does them at the moment.

Now stacked and stacked with too many projects.
Only time can solve this.

Thank you
Kim

by **Pontosmodel** » Mon Aug 08, 2011 11:55 pm

Hi All,

Currently wooden deck is just 10% portion of my business.

Yesterday I designed 150mm/L55 sk/c28 for 1/350 Scharnhorst with help Christian from Germany.

Thank you
Kim

by **bgire** » Mon Aug 01, 2011 8:17 am

Pontosmodel wrote:At this point, You French can give me some advices for these matters.
I will follow your advices because I do not know detailly for this Richelieu.Thank you
Kim

PM sent
_Bruno

by **mermaid1** » Mon Aug 01, 2011 8:08 am

It would be nice to get wood deck for armored cruiser Varyag 1:350 (Zvezda), for Revell Great Eastern, cruiser Emden, Hobby Boss Italian cruiser Pola 1:350.
Nobody does them at the moment.

by **Pontosmodel** » Mon Aug 01, 2011 6:59 am

bgire wrote:Hello Kim,

I'm waiting now for a similar deck for Essexes and for French BB Richelieu.
As for Richelieu, will it be possible to have it tinted natural wood?

_Bruno

We've bought and got this French ship kit.
If I make this Wooden deck as kit standard, I can make within one day.
But I would and should study more for the colors of deck or shape of deck because I am sure Trumpeter might have some faults in realizing deck.
I also would scribe Barrels and Mast an yardarms for this ship
At this point, You French can give me some advices for these matters.
I will follow your advices because I do not know detailly for this Richelieu.

Thank you
Kim

by **bgire** » Sat Jul 30, 2011 2:26 pm

Hello Kim,

I just received your Independence flight deck.

AFAIK it's the first time a US carrier kit wooden deck is made with the grain of the wood in the right direction, i.e. transversally.
That makes your deck highly realistic, but somewhat difficult to handle.
This deck is really awesome and almost to scale with a thickness of .26mm, giving 91mm to scale. The PE accessories are very nice too.
Love the lift PE borders.

I'm waiting now for a similar deck for Essexes and for French BB Richelieu.
As for Richelieu, will it be possible to have it tinted natural wood?

_Bruno

by **Timmy C** » Fri Jul 29, 2011 2:56 am

If you typed that exact address, then it's spelt wrong - there's a wrong 'n' in the 'pontonmodel' part, which should be an 's', as in 'pontosmodel'.

by **pb_rain** » Thu Jul 28, 2011 10:11 pm

Hey,

I tried to send an email to your help@pontonmodel.com in order to inquiry your product, but it seems this addres is wrong since system told me Delivery Status Notification (Failure)?.

by **Pontosmodel** » Tue Jul 26, 2011 9:49 pm

pagodaphile wrote:
"1/700 we already finished fitting main battle ships waiting for producing.
1/700 US Aircrafts(Enterprise and Vogue and other class) with 20-B also within our near project".
This is goods news. With 1/700, I think you will be reaching a market that you would have otherwise passed by, with only offering 1/350. Many of us do not find the larger scales practical.

Wood sheet may be some thicker for 1/700 though the effect is better than painting.
So I am searching the thinner material for 1/700 or making sheet.
I would not be YESMAN but I will try to do my best for as many decks as possible.

Thank you
Kim

The Ship Model Forum

pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Post a reply

Expand view Topic review: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

pontosmodel.com Barrels

pontosmodel.com 1/350 New Jersey deck 1982

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

pontosmodel.com Barrels

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.

Re: pontosmodel.com Launched. Blue Deck, Barrels, PE Etc.