The Ship Model Forum

by **Rom1** » Tue Sep 17, 2019 8:43 am

Thanks

by **EpsilonZer0** » Mon Sep 16, 2019 8:33 am

Rom1 wrote:Hi Epsilon,

Thank you very much!

Sadly, I ended up to buy the Infini set...
I will compare to Pontos when i get it. And see if it is worth to resell it for the Pontos.

Features I like on Pontos are resin helos and PE helo decks.

In the other hand, Opened PE tomahawk in Infini set are nice too...

Thanks again

Romain

I think there was a way to make an open tomahawk launcher with the Pontos. It came with Veteran's resin launchers, but there were parts on the PE sheet I believe to modify the Tamiya launchers.
Don't hold it to me, but that is what I remember. Honestly there was ALOT of undocumented PE here that either I didn't use or figured out its use late in the game. Fully recommend going on Amazon and buying a few coffee table books on the subject matter.

by **Rom1** » Fri Sep 13, 2019 2:59 am

Hi Epsilon,

Thank you very much!

Sadly, I ended up to buy the Infini set...
I will compare to Pontos when i get it. And see if it is worth to resell it for the Pontos.

Features I like on Pontos are resin helos and PE helo decks.

In the other hand, Opened PE tomahawk in Infini set are nice too...

Thanks again

Romain

by **EpsilonZer0** » Thu Sep 12, 2019 12:01 pm

Rom1 wrote:Hi,

It seems the 35009F1 or 35011F1 set are not designed for the 1991 version (78029).
Because Pontos designed those sets for the New Jersey molds.

The 37018F1 fits the 1991 version 78029.

Question:
Has anyone tried to fit 35009 or 35011 on the 1991 version 78029?
What parts are problematic? Apart from the stern deck parts as mentioned by Kim.

Thanks for your help

Romain

Romain I used the Pontos 35011F1 on the Tamiya 78029 with no problems. I didn't even realize the pontos kit was designed for the New Jersey mold until after I finished.
In hindsight there might have been a couple of fit issues with the wood overlay but I just made a little trim and carried on and chalked it up to my own inexperience. (was my first pontos)
Just beware the instructions can be cryptic at times and need photographs to sometimes figure out.
Have fun

by **Rom1** » Wed Aug 28, 2019 9:43 am

Hi,

It seems the 35009F1 or 35011F1 set are not designed for the 1991 version (78029).
Because Pontos designed those sets for the New Jersey molds.

The 37018F1 fits the 1991 version 78029.

Question:
Has anyone tried to fit 35009 or 35011 on the 1991 version 78029?
What parts are problematic? Apart from the stern deck parts as mentioned by Kim.

Thanks for your help

Romain

by **robertmelvin** » Thu Oct 08, 2015 3:22 pm

Pontosmodel wrote:WWII Missouri is in final stage but we need addtional 5in twin turret with new rein part.
This result will make decision the relesing date for this WWII Missouri set.

Thank you
Keumho Kim

Great news! It appears that I am not alone in being in some strange way drawn to that particular ship. I don't know what it is about her, but whatever it is, she definitely has it! I've been debating making her my winter project, but if you are bringing out one of your sets for her I will definitely put her off until your offering hits the market. It might cost me a few body parts and my immortal soul (well, I'm not using it right now anyway - Oh Brother, Where Art Though?), but a small price to pay to truly dress up what will probably become a multi year project.

Thank you Mr. Kim for that great bit of news. Made my day!

Bob

by **fs13453** » Thu Oct 08, 2015 12:46 pm

Great!!!

by **Pontosmodel** » Thu Oct 08, 2015 5:33 am

WWII Missouri is in final stage but we need addtional 5in twin turret with new rein part.
This result will make decision the relesing date for this WWII Missouri set.

Thank you
Keumho Kim

by **robertmelvin** » Wed Oct 07, 2015 11:54 am

Any thought by Pontos to do a detail up set for the '44-45 fit of the U.S.S. Missouri. I know this has been covered by other manufacturers, but not to the Pontos level of detail.

Bob

by **Alex SZ1996** » Mon Oct 05, 2015 5:53 pm

it helped, thanks. now i know which to order

by **alang** » Mon Oct 05, 2015 10:21 am

Reply from Mr.Kim to similar question on 31st March 2013.

l am very sorry that our current Iowa sets(35007-35011F1) can't applied on the Tamiya new Missouri 1991 kit completely because these sets are fitted for Tamiya New jesrsey (old or new) kit.
Especially stern deck parts may be hard.

Hope this helps.

by **Alex SZ1996** » Sun Oct 04, 2015 1:10 pm

does 35009F1 USS Missouri 1991 only fit with Tamiya USS New Jersey, or does it fit on Tamiya USS Missouri too?

by **Pontosmodel** » Thu Sep 10, 2015 4:20 am

Front door might be 339 and both side of doors are from 324-326...
We added doors, windows, some ladders and etc. on this set left to modelers for being researched and applied on.

Thank you
Keumho Kim

by **Dmitr** » Mon Sep 07, 2015 10:00 am

Hi Pontos!

I have your product 35009F1 (kit for Missouri) and I need your clarification on the following: the details circled in pink don't have a numbers. Could you pls advise the respective numbers for them?

by **Admiral John Byng** » Wed Jun 10, 2015 2:15 pm

Wisconsin set is available at Lucky Model:

http://www.luckymodel.com/scale.aspx?se ... ock_only=N

by **BBIowaclassfan** » Wed Jun 10, 2015 9:32 am

Pontos update set for new USS Missouri circa 1991 kit

Has anyone heard when this set will be available?? Got the new Tamiya Missouri 1991 kit. Thanks!

by **BB62vet** » Thu Jan 08, 2015 9:33 pm

Just an update on the 1967-69 USS NEW JERSEY Decking for my 1:200 MO kit:

Received the decking just before Xmas - Pontos did a great job on the decks. Removed everything I asked them to remove. The color is rather yellow, but I'm testing stains and comparing them to pix and a small plug from the actual deck that I have to come up with a suitable color. I will then stain and finish (Wipe On Poly) prior to removing any of the decking from the sheet.

I've posted a couple photos on my build in the Picture Post/Works in Progress Forum under my NEW JERSEY log.

Kudos to Kim @ Pontos for his assistance and technical support!

Hank

by **tko24** » Fri Dec 19, 2014 11:23 am

Thanks for the quick reply. I've ordered form HLJ many times but somehow I missed it on their site. Thanks!

by **SailorBill** » Fri Dec 19, 2014 10:06 am

"Sailor Bill, where did you order your USS Wisconsin 1991 add-on set from that you were able to get it way back in October? I still can't find it or the Missouri add-on set available anywhere? I've been wanting this set for the domes and other missing parts from the main set ever since I bought it over a year ago. Supposedly it's been released, but yet not available from anybody?"

I had asked Kim at Pontos Models about this item way back when I heard
they were making the add-on set. He sent me one gratis. It is very nice
and is worth waiting for. I do see that Hobby Link Japan is advertising
this item on their website. Search "USS Wisconsin 1991 Add-On Set by
Hobbydecal". You will find it listed as a January 2015 release with a price
of about $12.14 (today's yen conversion). You can also find the USS Missouri
Add-On Set listed, with a price of around $15.17. Hope this information is
helpful to you and others. Happy Holidays! Bill

by **tko24** » Mon Dec 15, 2014 4:45 pm

SailorBill wrote:
Pontosmodel wrote:Today I have also finalized Wisconsin1991 Add-on set.
There [are] just 6 Resin parts. Etching parts are included in #7 PE fret of 35010F1
Wisconsin detail set already.

31010F1 Wisconsin 1991 Add-on set 15.00USD

Thank you
Keumho Kim
Received the USS Wisconsin Add-on Set on October 10th.
Thank you Kim at Pontosmodel.

Sailor Bill, where did you order your USS Wisconsin 1991 add-on set from that you were able to get it way back in October? I still can't find it or the Missouri add-on set available anywhere? I've been wanting this set for the domes and other missing parts from the main set ever since I bought it over a year ago. Supposedly it's been released, but yet not available from anybody?

The Ship Model Forum

Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Post a reply

Expand view Topic review: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Pontos update set for new USS Missouri circa 1991 kit

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: Pontosmodel 1/350 USS Iowa Class Detail Up Sets

Re: 31010F1 Wisconsin 1991 Add-on set

Re: 31010F1 Wisconsin 1991 Add-on set