by Rob Wood » Sun Mar 16, 2014 10:04 pm
I spoke to the judges about their reasoning. Both of them wanted to go with the Heian Maru, but it lost the fit and finish duel. Here's the way they explained it:
Suppose the judges encounter two models with roughly the same amount of detail, and both look great from 2 feet away. What do they do? They start moving in, closer and closer, with reading glasses, looking for flaws. At some point, one of them still looks good, while the other exhibits imperfections in workmanship. That's why Yamato won. I asked them to show me what they were seeing. In general, it was sloppy glue joints and details that should have been subtle and feathered (such as rust stains), but looked obviously painted with a wet brush. Another was rigging, and another was crudely assembled/fabricated railings and other structures.
I've zoomed in on details on both of these models. Crude details found on the Heian Maru simply aren't present on the Yamato. The objective is not to to put a huge amount of details on a model, but rather, to make the details you do include as perfect as you can. In some cases, I've used arrows on the photos below to point out what the judges were seeing, and in others, I've simply included the photo, and the issues should be obvious.

Heian Maru aft gun mount

Heian Maru forward gun mount, barrel oddly placed, anchor chain out of scale, bright silver and broken, figures crude

Heian Maru paint problems, flashing on the props

Heian Maru paint sags and globs of glue

Heian Maru heavy paint edges for rust stains, and rust stains above the scupper

Heian Maru heavy paint edges for rust stains, and rust stains above the scupper. Also, camo gray paint bleeding over onto wood deck

Heian Maru stack shows vertical seams which might have been actual deliberate details, except they're only on one side of the ship. Sloppy paint and stains.

Heian Maru rigging lacks hardware, and is simply glued. Rigging lines not trimmed off.

Yamato rigging shows masterful use of connectors and other hardware.

Yamato triple AA with crewman.

Yamato twin AA

Yamato crane
Rob
I spoke to the judges about their reasoning. Both of them wanted to go with the Heian Maru, but it lost the fit and finish duel. Here's the way they explained it:
Suppose the judges encounter two models with roughly the same amount of detail, and both look great from 2 feet away. What do they do? They start moving in, closer and closer, with reading glasses, looking for flaws. At some point, one of them still looks good, while the other exhibits imperfections in workmanship. That's why Yamato won. I asked them to show me what they were seeing. In general, it was sloppy glue joints and details that should have been subtle and feathered (such as rust stains), but looked obviously painted with a wet brush. Another was rigging, and another was crudely assembled/fabricated railings and other structures.
I've zoomed in on details on both of these models. Crude details found on the Heian Maru simply aren't present on the Yamato. The objective is not to to put a huge amount of details on a model, but rather, to make the details you do include as perfect as you can. In some cases, I've used arrows on the photos below to point out what the judges were seeing, and in others, I've simply included the photo, and the issues should be obvious.
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_forward-deck-gun-details_IMG_7585.jpg[/img]
Heian Maru aft gun mount
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_forward-deck-gun-details_IMG_7583.jpg[/img]
Heian Maru forward gun mount, barrel oddly placed, anchor chain out of scale, bright silver and broken, figures crude
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_paint-flashing_IMG_7616.jpg[/img]
Heian Maru paint problems, flashing on the props
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_paint-glue_IMG_7602.jpg[/img]
Heian Maru paint sags and globs of glue
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_paint_IMG_7570.jpg[/img]
Heian Maru heavy paint edges for rust stains, and rust stains above the scupper
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_paint_IMG_7602.jpg[/img]
Heian Maru heavy paint edges for rust stains, and rust stains above the scupper. Also, camo gray paint bleeding over onto wood deck
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_stack-seams_IMG_7564.jpg[/img]
Heian Maru stack shows vertical seams which might have been actual deliberate details, except they're only on one side of the ship. Sloppy paint and stains.
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/Heian_Maru_rigging_IMG_7586.jpg[/img]
Heian Maru rigging lacks hardware, and is simply glued. Rigging lines not trimmed off.
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/yamato_rigging-IMG_7597.jpg[/img]
Yamato rigging shows masterful use of connectors and other hardware.
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/yamato-aa_crewman_IMG_7592.jpg[/img]
Yamato triple AA with crewman.
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/yamato-twin-aa_IMG_7591.jpg[/img]
Yamato twin AA
[img]http://www.westernwarshipcombat.com/images/stories/2014/petaluma/details/yamato_crane_IMG_7572.jpg[/img]
Yamato crane
Rob