The Ship Model Forum

by **HvyCgn9** » Wed Jul 06, 2016 5:07 am

prehaps merge it into the Juan Carlos thread.....a Juan Carlos/Canberra class LHD thread??

Went on the tour of HMAS Adelaide when she visited here. Very interesting to see inside hanger and well deck.

Cheers Bruce

by **Sutho** » Wed Jun 29, 2016 1:43 am

This should be moved to amphibious and transports. It is not an aircraft carrier and does not deserve the status.

by **brad** » Sun Jun 26, 2016 9:46 pm

Second is a paper version. Haven't measured it so no idea of scale:

I see that it says it's an Amphibious Assault Ship - words which were never uttered on board. Her humanitarian capabilities were the ones highlighted. Even when I was talking to the gunners, they were keen to state that they would never be used because of the humanitarian tasks it will be undertaking. It was interesting to note there were no Phalanx installed on her.

Do I have to do a build log for this one?

by **brad** » Sun Jun 26, 2016 9:42 pm

HMAS Adelaide visited the port of Adelaide over the last few days and they had an open day yesterday.

They were giving away 2 models of her so I took one of each.

First is a foam rendition and, at about about 11.7cm, is in about 1/1974 scale:

by **thomastmcc** » Sat Oct 24, 2015 3:17 pm

interesting you want to do this in 1/72 it would be huge..

by **brad** » Mon Sep 28, 2015 1:26 am

It would be even better if they were doing it in 1/350 although a resin version would cost a small fortune.

cheers,

bj

by **Forlornhope** » Sat Sep 26, 2015 6:44 pm

Out of interest, I have just finished converting the Orange Hobby Juan Carlos and have sent them a pic and they are now going to be doing the Canberra class as a model.

http://orangehobby.blogbus.com/

by **AussieBuilder** » Sun Aug 17, 2014 12:48 am

It's been a busy weekend on this. Cleaned parts, and done a rough paint.

Also removed radar tower, and made some modifications.

The little platform/crane addition to the front of the tower is the one that's kept me busy. Got it done, and am very happy (that it's done and to an acceptable standard).

More to come

by **AussieBuilder** » Fri Aug 15, 2014 9:22 pm

I bought the Orange Hobby Juan Carlos I 1/700.

With some simple modifications to the radar towers etc, an additional observation deck to the control tower, and some change in decals (which I have yet to work out), I'll have my very own HMAS Canberra LHD 1/700 model.

I also bought some SH-60s, Chinooks, to go with the NH90s that come with the kit. The kit also came with Harriers, which the RAAF and RAN do not operate. So I bought some F-35s instead (I think it's going to happen!).

Anyway, here some pics. A very detailed model, that comes with some very nice photo-etch for both the ship and the aircraft.

by **AussieBuilder** » Tue Jul 15, 2014 12:01 am

I'm just about to start building the a 1/700 HMAS Canberra III using the Orange Hobby kit for the Juan Carlos I.

It all looks fairly straight forward, as the ships are *almost* identical, with a few changes to the radar towers being the biggest difference.....

However, my one challenge is the decals. I want to mark the deck exactly like the HMAS Canberra, but the decals that come with the Juan Carlos will not achieve this (missing a long straight line or two).

Does anyone have any tips or ideas on either:
1. Where I can get generic 1/700 decals for an aircraft carrier; OR
2. Somehow create my own decals and/or paint the deck myself.

Any advice, tips, or tricks would be appreciated.

by **Haijun watcher** » Mon Mar 03, 2014 11:31 am

A notable repost, considering that CANBERRA is nearing the end of its sea trials:

A photo posted, today, by VAdm Ray Griggs, Chief of Navy in Australia:

NUSHIP CANBERRA in Port Phillip Bay today on her initial sea trials. Great day for it!
Source: Twitter

by **Steve Batcheldor** » Sat Feb 22, 2014 5:02 pm

Hi Mick

I didn't realise that you were interested in building a model of the new LDH. I have some general arrangement drawings that you may be interested in looking at for the LHD. Let me know when you are coming to Wagga Wagga next and I will dig these drawings out. I have made a start on a 1:350 hull for one of these.

Steve

by **Haijun watcher** » Sat Feb 08, 2014 11:52 pm

An update on soon-to-be HMAS Adelaide, the 2nd of the Canberra class LHDs being built.

From DEFENSE INDUSTRY DAILY:

LHD02 Adelaide arrives in Australia, as LHD01 Canberra preps for sea trials

Feb 7/14: LHD02 arrives. The heavy-lift ship MV Blue Marlin is back in Australia with another LHD hull, after a 10,000 nmi journey that took 8 weeks.

LHD02 Adelaide arrives in Port Phillip Bay, Melbourne, and will be taken to the Patrick Webb Dock for removal of the sea fastenings and unloading. A tugboat with take her to the Williamstown dockyard in the suburbs for superstructure and fit-out work, and the hull is expected to be there within a week.

Things will be busy in Williamstown. LHD01 Canberra arrived back on Oct 17/12, and sea trials will begin within a few weeks. Sources: Australia DoD, �Landing Helicopter Dock Ship arrives in Melbourne� | Australia Defence, �Second LHD dock arrives in Australia�.

Plus another belated update from last May on the class leader Canberra, at the link below; take note that this ship's first CO or "plankowner "captain will be Jonathan Sadlier, one of the many transferred personnel from the Royal Canadian Navy.

Link

by **mmaresm** » Fri Mar 02, 2012 12:25 am

Sorry but here is the link from FreeTime Hobbies

http://www.freetimehobbies.com/OH-N07-018-280.aspx

by **mmaresm** » Fri Mar 02, 2012 12:24 am

ozpirate if you look at this site FreeTime Hobbies, you can find a 1/700 of a New company Orange Hobby.

They are a Chinese company that has made a resin kit of the Spanish LHD Juan Carlos I, which is the same design of your HMAS Canberra kit. The only thing is that thing is that it has decals for the Spanish ship, not Australia, sorry Mate.

But it is a great ship and a Great company... they are even getting ready to have a kit of HMS Hermes in Falklands fit. Check it out.

M. Mares

by **ozpirate** » Sun Feb 08, 2009 10:49 pm

The Australian Government has approved a AU$3 billion project to build two LHDs, which will have air support, amphibious assault, transport and command centre roles. They are planned to replace in turn HMAS Tobruk and one of the RAN's two current Kanimbla class vessels. On 20 January 2006, it was announced that the two ships would be named HMAS Canberra and HMAS Adelaide. The ships are due to enter service from 2013
The design was based on the Spanish Buque de Proyecci�n Estrat�gica design, proposed by the Spanish company Navantia.
http://en.wikipedia.org/wiki/Canberra_class

My question is, does anyone know of any plans available for these ships? (The Australian one that is) Or do I have to work on simple drawings and enlarge them?

This is for a future project.
I would build in scale 1/72 making it quite large model.

The Ship

Cut away of ship

Side View

Top View

The Ship Model Forum

Calling all Canberra-class LHD fans

Post a reply

Expand view Topic review: Calling all Canberra-class LHD fans

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Re: Calling all Canberra Class LHD Fans!

Calling all Canberra-class LHD fans