The Ship Model Forum

by **GewoonWouter** » Thu Jun 13, 2019 12:55 am

I had that in the past as well. Strange that 2 years later this still happens, you would expect better quality checks. Send them an e-mail indeed, I must say they have a good after sales service. I received some proper drilled replacements.

by **Alex SZ1996** » Sat Jun 08, 2019 4:31 pm

my Yamato set has 6 of the main gun barrels drilled off center. will have to contact Pontos.

by **marengtech** » Sat Aug 20, 2016 10:07 am

Well, I'm home from a very successful RIMPAC '16 and would like to personally thank Mr. Kim for addressing my concerns with set issues and to my surprise the replacement barrels were waiting for me on my desk.

Thank you very much Mr. Kim.

by **Pontosmodel** » Fri Jul 15, 2016 6:41 am

Yep Yamato 1945 has 6 single mounts and Musashi 1944 seems to have about 21-25 singles.
I had just copied 25 of Musashi's to Yamato brass part list.

Anyway please check the muzzle hole of 460mm barrels.
Some are centered wrongly. We have reproduced this 460mm Barrels yesterday and started to ship to individual users who have sent their postal addresses.

And recently I changed mail server newly so I can reply to Gmail, Yahoo, Comcast Etc. with few problems.
But if you need some needed parts during work, missed or broken or eaten by Carpet Monsters, please send email with your postal address as I might or could not reply all your emails.

Good luck for your work.

Thank you
Keumho Kim

Thank you
Keumho Kim

by **cplchanb** » Fri Jul 15, 2016 6:35 am

So I just got an email from Mr Kim that confirmed my suspicions.

The 25x pedestals is actually a typo.he admitted that
It was a misprint from the musashi set and that 6
Is actually the correct number. Makes sense because they did in fact remove most of the mounts from the
Yamato save for the 6 near the forward turrets. I encouraged him to make a post in this forum so hopefully he can officially clear this up

by **Giampiero** » Sat Jul 02, 2016 8:38 am

Hello Kim,

You received the my emali ?

Regards
Giampiero

by **marengtech** » Sat Jul 02, 2016 1:20 am

Pontosmodel wrote:Wow,
Sorry for the late logging in this forum...
I have received some mails from you and replied some.
But in these days Some mail servers as Yahoo.com or comcast and some Gmail rejects my email for reply.
So if you have some asking for replacement parts please include your postal address for replacement parts.
If you have not received anything yet please email again with your postal address.
I will send these directly and promptly.

Sorry these days some projects have cut in our previous projects and so alls schedules are come to Black hole.
I will arrange these soon.
Thank you
Keumkho Kim

Hello Mr Kim,

Since you are having troubles replying to customers with Gmail, like myself, I've sent you a PM.

Cheers

by **Hold Fast** » Tue Jun 21, 2016 6:24 am

Great to hear from you again Mr Kim. Thanks for the email, I am sure we can work through this problem.

by **Pontosmodel** » Mon Jun 20, 2016 7:03 am

Wow,
Sorry for the late logging in this forum...
I have received some mails from you and replied some.
But in these days Some mail servers as Yahoo.com or comcast and some Gmail rejects my email for reply.
So if you have some asking for replacement parts please include your postal address for replacement parts.
If you have not received anything yet please email again with your postal address.
I will send these directly and promptly.

Sorry these days some projects have cut in our previous projects and so alls schedules are come to Black hole.
I will arrange these soon.
Thank you
Keumkho Kim

by **baseballbrat** » Sun Jun 19, 2016 7:54 pm

Angeliccypher wrote:Timmy C and I never received a response let alone my parts. It was another modeller that hooked me up.

This is completely unacceptable for the manufacture to ignore requests to complete their sets. For the price paid, you should have at least gotten your moneys worth.

I planned to buy other Pontos products, but until this guy decides that the consumer matters, I will hold off and go where I know I can get help when issue arise.

I would letter grade him as F

by **Angeliccypher** » Sun Jun 19, 2016 7:06 am

Timmy C and I never received a response let alone my parts. It was another modeller that hooked me up.

by **baseballbrat** » Sat Jun 18, 2016 10:49 pm

Asking anyone here that had email Mr. Kim requesting parts missing, did he ever answer you and send you what your were missing?

by **marengtech** » Fri Jun 10, 2016 10:12 am

GewoonWouter wrote:
Hold Fast wrote:I have noticed that they do drop off the radar from time to time, and the rumors about them folding have been going for a while, but the likes of Lucky Model get a shipment in every month or so. I would genuinely be surprised if they have ceased trading. More likely they are a small business who are really busy. I have the hobby shop I bought the set from chasing them down so we will know soon enough.
I contacted Luckymodel recently and they said they were still trying to get hold of the replacements...they didn't mention anything about Pontos being out of business so hopefully they'll pop up again soon

Well I've followed your lead so hoping LuckyModel will have better success at contacting them than I did.

by **GewoonWouter** » Thu Jun 09, 2016 10:21 am

Hold Fast wrote:I have noticed that they do drop off the radar from time to time, and the rumors about them folding have been going for a while, but the likes of Lucky Model get a shipment in every month or so. I would genuinely be surprised if they have ceased trading. More likely they are a small business who are really busy. I have the hobby shop I bought the set from chasing them down so we will know soon enough.

I contacted Luckymodel recently and they said they were still trying to get hold of the replacements...they didn't mention anything about Pontos being out of business so hopefully they'll pop up again soon

by **Angeliccypher** » Thu Jun 09, 2016 6:15 am

Given their lack of answering anyone, I have been wondering this myself. For those who have had issues with the barrels, Tamiya makes a metal replacement set.

by **Hold Fast** » Thu Jun 09, 2016 5:55 am

I have noticed that they do drop off the radar from time to time, and the rumors about them folding have been going for a while, but the likes of Lucky Model get a shipment in every month or so. I would genuinely be surprised if they have ceased trading. More likely they are a small business who are really busy. I have the hobby shop I bought the set from chasing them down so we will know soon enough.

by **alang** » Thu Jun 09, 2016 2:27 am

Has anybody heard anything at all from Pontos.............or do we just accept that they have ceased trading ?

They have certainly stopped posting anything on this site for some time now.

by **marengtech** » Mon Jun 06, 2016 11:31 pm

alang wrote:Perhaps our friends at Sovereign Hobbies could try and get a reply from Pontos to post on here as all this is surely not doing sales of Pontos sets any good.

Alan

Well, I've pretty much given up on getting the shortage of the 25mm pedestals for the advanced add on set.

I was hoping that Sovereign Hobbies might have some sort of insight as to what is or may be happening at Pontos by this time, I will be going back sea again and part of that will be participating in the biggest Naval exercise of the Pacific; all you Navy types know what I speak of.

For the time being Pontos has lost a customer which is unfortunate as I like their detail sets.

by **alang** » Sat Jun 04, 2016 7:58 am

Perhaps our friends at Sovereign Hobbies could try and get a reply from Pontos to post on here as all this is surely not doing sales of Pontos sets any good.

Alan

by **GewoonWouter** » Fri Jun 03, 2016 3:11 am

Greg lester wrote:Will this pontos set work with the 2005 Tamiya Yamato or does it have to be the 'New Tool'?

not 100% sure but since both kits are completely different I think most of it won't work on the older kit.

And hope I'll still get my replacement parts, really don't want to use the plastic gun barrels...it's taking a very long time now, hope they aren't belly up as mentioned...:O

The Ship Model Forum

Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New Tool)

Post a reply

Expand view Topic review: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New Tool)

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To

Re: Pontosmodel 1/350 IJN Yamato/Musashi Detail Sets (New To