Brush-painting Carrier hull/deck

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
BBCode is ON
[img] is ON
[url] is ON
Smilies are OFF
Topic review
   

Expand view Topic review: Brush-painting Carrier hull/deck

Re: Brush-painting Carrier hull/deck

by Timmy C » Wed Jun 12, 2019 4:58 pm

If you're talking about my kit, it's the resin Hermes kit from Orange Hobby.

Re: Brush-painting Carrier hull/deck

by Niallmhor5968 » Wed Jun 12, 2019 4:32 pm

Hi ,could you tell me if the carrier you used was a donor kit (ie: HMS Victorious) or a resin kit of Hermes?
Thanks
Niallmhor

Re: Brush-painting Carrier hull/deck

by MartinJQuinn » Thu Sep 07, 2017 6:40 pm

Keeping the paint brush slightly damp with thinner also helps the paint from drying. Search FineScale Models website - they did an article on it some time ago.
Possum-Pie wrote:I've read alot about primer...is it really needed?
On a injection molded plastic kit, no.

Re: Brush-painting Carrier hull/deck

by Possum-Pie » Thu Sep 07, 2017 4:01 pm

Timmy C wrote:Thin paint helps a lot - let each layer dry before doing a subsequent coat.

The great thing about carriers is that you can weather the crap out of the flight deck with different shades to hide any brush strokes. For the hull, make good use of the various sponson surfaces to apply edge-to-edge strokes, and try doing vertical strokes - they blend with the direction of weathering better.

Here's a 1/700 carrier I did using only brushes:
Thanks, that is a SWEET looking paint job! Better to thin and multiple coats. I've read alot about primer...is it really needed?

Re: Brush-painting Carrier hull/deck

by Timmy C » Thu Sep 07, 2017 3:58 pm

Thin paint helps a lot - let each layer dry before doing a subsequent coat.

The great thing about carriers is that you can weather the crap out of the flight deck with different shades to hide any brush strokes. For the hull, make good use of the various sponson surfaces to apply edge-to-edge strokes, and try doing vertical strokes - they blend with the direction of weathering better.

Here's a 1/700 carrier I did using only brushes:
Attachments
P8281700.JPG
P8281767.JPG

Brush-painting Carrier hull/deck

by Possum-Pie » Thu Sep 07, 2017 1:07 pm

Hi all, I'm new to the forum but not to modeling. I got a Trumpeter 1:700 Carrier model, and realize that on such a small scale, brush strokes are going to be horrible. I don't have air-brush, and would rather not spray-paint, although I will if I have to. Any suggestions to paint large area hull/flight deck with acrylics without the brush strokes? In 1:700 scale, even 1/100th inch thick brush stroke will look like 7" thick paint in real life...that is THICK!

Top