The Ship Modelers Source
Skip to content
by AndrexP » Thu Dec 11, 2025 11:53 pm
by Tracy White » Thu Dec 11, 2025 12:13 am
Ian Roberts wrote: Sun Nov 03, 2024 6:21 pm Charybdis wrote:Can anyone identify this piece of equipment on USS Lexington (CV-16) after her 1945 refit? Photos taken post war. These are Mark 57 directors installed late in the war for auxiliary quadrant control of the 5" and 40mm guns aboard the larger ships. I guess based on the photos (and the CV-17 BOGP) that there were four directors in total aboard the Essex class carriers, which matches the cruiser and BB installations. Two are fore and aft on the island with two more fore and aft on the port side of the gallery deck level.
Charybdis wrote:Can anyone identify this piece of equipment on USS Lexington (CV-16) after her 1945 refit? Photos taken post war.
AndrexP wrote: Sun Aug 31, 2025 1:06 pmI can find very few pictures showing side numbers for their VT squadron (VT-5), but it seems fighters were 1- or 2-digits while the only clear TBF photo I could find shows side number 121.
by AndrexP » Sun Aug 31, 2025 1:06 pm
by benjamin.marn » Tue May 20, 2025 5:50 pm
by Iceman 29 » Wed Jan 01, 2025 9:26 am
by Charybdis » Mon Nov 04, 2024 5:28 am
Ian Roberts wrote:Charybdis wrote:Can anyone identify this piece of equipment on USS Lexington (CV-16) after her 1945 refit? Photos taken post war. These are Mark 57 directors installed late in the war for auxiliary quadrant control of the 5" and 40mm guns aboard the larger ships. I guess based on the photos (and the CV-17 BOGP) that there were four directors in total aboard the Essex class carriers, which matches the cruiser and BB installations. Two are fore and aft on the island with two more fore and aft on the port side of the gallery deck level. The plans also show associated radar transmitter rooms below each installation (as Mark 57 required some alterations below deck to accommodate its associated radar set Mark 29. I actually researched this system at length several years back and consolidated my findings here: http://shipbucket.com/wiki/index.php/Mk_57_GFCS
by Ian Roberts » Sun Nov 03, 2024 6:21 pm
by StevenVD » Sun Nov 03, 2024 6:05 pm
by CV-17 Son » Mon Oct 28, 2024 11:31 am
by FFG-7 » Sat Oct 19, 2024 1:58 pm
by Charybdis » Sat Oct 19, 2024 10:23 am
by Guest » Fri Dec 01, 2023 10:34 pm
DavidP wrote:would likely be on the Focsle deck bow or the main deck stern where the 5" practice loader is.
by egatlanta69 » Wed Nov 29, 2023 6:43 pm
by Mike W » Fri Nov 24, 2023 11:49 am
ModelMonkey wrote:Mike W wrote:I have the Dragon 1/700 USS Lexington kit and I'm aware that you can make any late war short hull Essex class from that kit. Has anyone done a rough guide to make USS Essex in 1944, when she had her Light Grey/Black camouflage scheme? It occurred to me that it might be fairly easy to work out things like her bofors and radar fit but might be a bit harder working out things like all the galleries and parts for the island etc. thanks Mike Good news, Mike, your new 1/700 scale USS Essex CV-9 island as it appeared from May, 1944 through 1945 is ready. Link: https://www.model-monkey.com/product-pa ... -1944-1945 References indicate that the island was in this configuration during raids on Okinawa and Formosa and during the Battle of Leyte Gulf.
Mike W wrote:I have the Dragon 1/700 USS Lexington kit and I'm aware that you can make any late war short hull Essex class from that kit. Has anyone done a rough guide to make USS Essex in 1944, when she had her Light Grey/Black camouflage scheme? It occurred to me that it might be fairly easy to work out things like her bofors and radar fit but might be a bit harder working out things like all the galleries and parts for the island etc. thanks Mike
by Tracy White » Fri Nov 24, 2023 10:17 am
DougC wrote:One can see the hangar deck catapult of the Yorktown in action in the movie "Wing and a Prayer".
by Sutho » Thu Nov 23, 2023 6:42 pm
lexington1709 wrote:Sutho wrote:Has anyone else done that Pontos Advanced detail set for the Essex in WWII??? Great kit but poor instructions. I have now constructed the island for 1943 with the quad bofor guns below the bridge but have the mast done for 1945!!!! No clear indication in instruction what to do. Looks like some adjustments are necessary after all the hard work done. It appears from photos that the lower catapults that were across the width of the ship in the hanger bay were removed. I don't know what to do now. Retrofit the mast to 1943 or destruct the island and refit it to 1945. What ship and time period?
Sutho wrote:Has anyone else done that Pontos Advanced detail set for the Essex in WWII??? Great kit but poor instructions. I have now constructed the island for 1943 with the quad bofor guns below the bridge but have the mast done for 1945!!!! No clear indication in instruction what to do. Looks like some adjustments are necessary after all the hard work done. It appears from photos that the lower catapults that were across the width of the ship in the hanger bay were removed. I don't know what to do now. Retrofit the mast to 1943 or destruct the island and refit it to 1945.
by Tracy White » Thu Nov 23, 2023 6:08 pm
by DougC » Thu Nov 23, 2023 11:22 am
by Tracy White » Thu Nov 23, 2023 11:17 am
Sutho wrote:It appears from photos that the lower catapults that were across the width of the ship in the hanger bay were removed.
by lexington1709 » Thu Nov 23, 2023 10:48 am
Top