plywood questions

Post a reply

Confirmation code
Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:smallsmile: :wave_1: :big_grin: :thumbs_up_1: :heh: :cool_1: :cool_2: :woo_hoo:
View more smilies
BBCode is ON
[img] is ON
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: plywood questions

by Jose Chaica » Tue Jun 13, 2006 3:19 am

garyj36 wrote: But Im dangerous now. I have a fresh scrollsaw and stationary belt/disc sander! :heh:
Wouldn�t want to meet with you, in a dark alley.... :lol_3:

:cool_1: .

by scratchshipnut » Mon Jun 12, 2006 11:47 pm

Ive tried that same construction method in plastic, but I always get it too tight end to end. But Im dangerous now. I have a fresh scrollsaw and stationary belt/disc sander! :heh:

by Jefgte » Mon Jun 12, 2006 6:14 pm

Here is a photo of 1/700 HMS Invincible, 1906
I use 3mm (0.12") plywood for hull and deck (nice look)


Image



Jef :wave_1:

by Jose Chaica » Mon Jun 12, 2006 12:41 pm

ARH wrote:
jmchaica wrote:...If only you could speak "metric" way.... :lol_1:

:cool_1: .


1200x 2400 :wave_1: :wave_1: :thumbs_up_1: :lol_3: :lol_3:
Hey...those are the exact size I�m buying, which is 2400x1200x8

:cool_1: .

by ARH » Mon Jun 12, 2006 12:06 pm

jmchaica wrote:...If only you could speak "metric" way.... :lol_1:

:cool_1: .


1200x 2400 :wave_1: :wave_1: :thumbs_up_1: :lol_3: :lol_3:

by Jose Chaica » Mon Jun 12, 2006 9:41 am

...If only you could speak "metric" way.... :lol_1:

:cool_1: .

by seaphoto » Sun Jun 11, 2006 4:00 pm

But I dont have a truck so 4/8 sheets are out of the question.
Almost every lumber yard I have visited has a panel cutting saw, for slicing plywood into bite size pieces. There is either a nominal fee, or sometimes they will do it for free. I have a van, but still take advantage of this, as cutting panels is a lot of work by yourself LOL

Kurt

by Victorious » Fri Jun 09, 2006 6:07 pm

garyj36 wrote:Im talking about using the thickness as the vertical height. Laying out the overhead brofile of the deckhouse and cutting it out. Then adding an .030 plastic deck above.Like I did on this 1/700 Helena with 1/4 balsa. In 1/350th its kind of crazy to worry about straight walls on deckhouses when I could just scrollsaw the deckhouse out of appropriate thickness material.
Image
Ah, now I understand what you are doing. This fact was not explained in the first place. The way you put it, it sounded as though you were building the whole superstructure with it, like we do on large scale models.

by scratchshipnut » Fri Jun 09, 2006 5:56 pm

Im talking about using the thickness as the vertical height. Laying out the overhead brofile of the deckhouse and cutting it out. Then adding an .030 plastic deck above.Like I did on this 1/700 Helena with 1/4 balsa. In 1/350th its kind of crazy to worry about straight walls on deckhouses when I could just scrollsaw the deckhouse out of appropriate thickness material.
Image

by Victorious » Fri Jun 09, 2006 4:41 pm

garyj36 wrote:I was hoping to find a 9/32 material to be close to a scale '8 in 1/350
What scale ship are you building, because if you are doing a 1/350 scale model, 9/32 plywood is far too thick for building superstructure, it would even be far too thick for a scale 1/72 model. 9/32 is just under 5/16 inches thick, which is just over 1/2 inch.

I think you need to understand different thicknesses of material. The main frames on my Marlborough are only 4mm thick, which is just under 1/4 inch. The Marlborough is scale 1/96 and is just over 6 foot long. Superstructure wood needs to be a lot thinner.

by scratchshipnut » Fri Jun 09, 2006 4:05 pm

I was hoping to find a 9/32 material to be close to a scale '8 in 1/350

by Victorious » Fri Jun 09, 2006 12:32 pm

1/8th inch ply is about the best if you are building a static model, as it is light and quite strong, personally, I would use 1/16th inch, but it will cost you more.

by ARH » Thu Jun 08, 2006 6:35 pm

garyj36 wrote:Oops, I meant 9/32. And I scratch static models

It does not matter what the thickness is then. :wave_1: :thumbs_up_1:

by scratchshipnut » Thu Jun 08, 2006 6:16 pm

Oops, I meant 9/32. And I scratch static models

by ARH » Thu Jun 08, 2006 5:52 pm

Hi, 19/32 seems a little thick for any superstructure, wieght up top is not good in a sailing model, 1/4 ply is more than thick enough, I would use balsa, far better, some places will cut an 8x4 sheet for you, ARH :wave_1: :wave_1: :thumbs_up_1:

plywood questions

by scratchshipnut » Thu Jun 08, 2006 5:42 pm

I just inherited a scrollsaw, bandsaw and belt sander and want to start using 19/32 plywood for some superstructure sections. But I dont have a truck so 4/8 sheets are out of the question. Any other sources for material that thickness in a more managable size?

Top