Author |
Message |
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
pascalemod wrote: Hey, this boot topping bit.. The fat boot topping was only applicable to the ship on the trials, so 1940s. After that it weas thinned down in half I believe and, say during the Denmark straight or in Norway before that it was thinner. At least thats what I gathered following the well known bismarck drawings webpage. Am I wrong? Are you building the full gray early version? Sorry for my belated reply. The model in question is a Scharnhorst, not a Bismarck. Apart from that, no boot-topping had been thinned down. On Bismarck, the dark grey bow and stern panels, the false waves, and the b/w stripes were "bleeding" about half way down into the boot-topping. In between it was the same width as ordered by the KM paint regulation, and this is visible on wreck photos. Happy modelling ~ Olaf!
[quote="pascalemod"]Hey, this boot topping bit.. The fat boot topping was only applicable to the ship on the trials, so 1940s. After that it weas thinned down in half I believe and, say during the Denmark straight or in Norway before that it was thinner. At least thats what I gathered following the well known bismarck drawings webpage. Am I wrong? Are you building the full gray early version?[/quote]
Sorry for my belated reply. The model in question is a Scharnhorst, not a Bismarck. Apart from that, no boot-topping had been thinned down. On Bismarck, the dark grey bow and stern panels, the false waves, and the b/w stripes were "bleeding" about half way down into the boot-topping. In between it was the same width as ordered by the KM paint regulation, and this is visible on wreck photos.
Happy modelling ~ Olaf!
|
|
|
|
Posted: Tue Jan 31, 2017 4:03 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Olaf Held wrote: FlowerPower wrote: Finished the lower hull Hey Rob, please keep the width of the boot-topping in mind, most overlooked by KM modellers. On a scale-350 model it should be around 6 or 7mm in width (depending on how far down it reached, there are different surces and different point of views, at least for Bismarck/Tirpitz, and I guess Scharnhorst/Gneisenau were not much different). On my Scharnies, I've opted for 6mm: (sorry for the bad shot, the WIP model is mothballed with others inside a showcase) I hand-painted a broad dark grey (NOT black) band around the hull, took 6mm Tamiya tape and applied it on that band (with its upper edge along the upper edge of the underbelly), then painted the hull above and below the masking tape (well, I applied the rust before painting the final coat, which then was lightly sanded to make the rust come through). And please, please make sure you get the various deck colours right, PM me if in doubt... (and if not) Happy modelling ~ Olaf! Hey, this boot topping bit.. The fat boot topping was only applicable to the ship on the trials, so 1940s. After that it weas thinned down in half I believe and, say during the Denmark straight or in Norway before that it was thinner. At least thats what I gathered following the well known bismarck drawings webpage. Am I wrong? Are you building the full gray early version?
[quote="Olaf Held"][quote="FlowerPower"]Finished the lower hull[/quote]
Hey Rob, please keep the width of the boot-topping in mind, most overlooked by KM modellers. On a scale-350 model it should be around 6 or 7mm in width (depending on how far down it reached, there are different surces and different point of views, at least for Bismarck/Tirpitz, and I guess Scharnhorst/Gneisenau were not much different).
On my Scharnies, I've opted for 6mm:
[img]http://foto.arcor-online.net/palb/alben/98/2569898/6266356339343034.jpg[/img] (sorry for the bad shot, the WIP model is mothballed with others inside a showcase)
I hand-painted a broad dark grey (NOT black) band around the hull, took 6mm Tamiya tape and applied it on that band (with its upper edge along the upper edge of the underbelly), then painted the hull above and below the masking tape (well, I applied the rust before painting the final coat, which then was lightly sanded to make the rust come through).
And please, please make sure you get the various deck colours right, PM me if in doubt... (and if not)
Happy modelling ~ Olaf![/quote]
Hey, this boot topping bit.. The fat boot topping was only applicable to the ship on the trials, so 1940s. After that it weas thinned down in half I believe and, say during the Denmark straight or in Norway before that it was thinner. At least thats what I gathered following the well known bismarck drawings webpage. Am I wrong? Are you building the full gray early version?
|
|
|
|
Posted: Sun Nov 06, 2016 2:22 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
PetrOs,
Yes, this GB is still open and runs through the end of October. We would be glad to have you join in and look forward to you posts.
PetrOs,
Yes, this GB is still open and runs through the end of October. We would be glad to have you join in and look forward to you posts.
|
|
|
|
Posted: Fri Aug 16, 2013 10:02 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Is the group build still running? If yes, I would join with the Samek's 1/350 Monitor or Virginia, not decided yet...
Is the group build still running? If yes, I would join with the Samek's 1/350 Monitor or Virginia, not decided yet...
|
|
|
|
Posted: Fri Aug 16, 2013 7:46 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
The North Carolina is now just two steps away from being finished after having a flat coat applied today. I need to add a flag and anchor chains, which I need to order, since I don't have any large enough for this BB. Attachment:
USS North Carolina 038.jpg [ 177.16 KiB | Viewed 3981 times ]
Attachment:
USS North Carolina 039.jpg [ 185.04 KiB | Viewed 3981 times ]
Attachment:
USS North Carolina 040.jpg [ 174.07 KiB | Viewed 3981 times ]
Attachment:
USS North Carolina 041.jpg [ 177.11 KiB | Viewed 3981 times ]
Attachment:
USS North Carolina 042.jpg [ 182.7 KiB | Viewed 3981 times ]
Attachment:
USS North Carolina 043.jpg [ 185.75 KiB | Viewed 3981 times ]
This kit has gone from the "Shelf of Doom" (for nearly six years) to near completion in just a matter of three months. If it wasn't for this BB Group Build, it would still be on the SoD. Here's the final picture of the now finished North Carolina with her anchor chains and flag added. Attachment:
USS North Carolina 044.jpg [ 179.92 KiB | Viewed 3935 times ]
The North Carolina is now just two steps away from being finished after having a flat coat applied today. I need to add a flag and anchor chains, which I need to order, since I don't have any large enough for this BB.
[attachment=6]USS North Carolina 038.jpg[/attachment] [attachment=5]USS North Carolina 039.jpg[/attachment] [attachment=4]USS North Carolina 040.jpg[/attachment] [attachment=3]USS North Carolina 041.jpg[/attachment] [attachment=2]USS North Carolina 042.jpg[/attachment] [attachment=1]USS North Carolina 043.jpg[/attachment]
This kit has gone from the "Shelf of Doom" (for nearly six years) to near completion in just a matter of three months. If it wasn't for this BB Group Build, it would still be on the SoD.
Here's the final picture of the now finished North Carolina with her anchor chains and flag added.
[attachment=0]USS North Carolina 044.jpg[/attachment]
|
|
|
|
Posted: Sat Jul 27, 2013 9:32 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Hope she turns out looking like the photos here.scratch building the roundbridge from plastic styrene sheets.
Hope she turns out looking like the photos here.scratch building the roundbridge from plastic styrene sheets. [img]http://i365.photobucket.com/albums/oo95/raider-hall/016219w.jpg[/img] [img]http://i365.photobucket.com/albums/oo95/raider-hall/016268.jpg[/img]
|
|
|
|
Posted: Sat Jul 20, 2013 11:11 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Seen this thread and had to get on this. I'm building all Tonkin Gulf Yaht Club 1/350's at this time. But the build here is a Tamiya 1/350 WWII New Jersey with a round bridge. I have all I need to get started as you see by the photos below. White Ensign Models 1/350 WWII Missouri p.e set,Alliance Modelworks 1/350 WWII 5 inch38 mounts with blast bags and also 1/350 Oerlikon 20mm guns. Aber 1/350 16inch barrels. Classic Warships conversion kit. [img]http://i365.photobucket.com/albums/oo95/raider-hall/100_3857.jpg[/img] [img]http://i365.photobucket.com/albums/oo95/raider-hall/100_3951.jpg[/img] [img]http://i365.photobucket.com/albums/oo95/raider-hall/100_3950.jpg[/img] [img]http://i365.photobucket.com/albums/oo95/raider-hall/100_3949.jpg[/img] [img]http://i365.photobucket.com/albums/oo95/raider-hall/100_3856.jpg[/img]
|
|
|
|
Posted: Sat Jul 20, 2013 10:57 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Martin, Thanks for your comment on the camo. I cut a lot of corners on appling the camo and I seems like I have to touch something else up everytime I go to do something to the ship. What a pain it has become. This week's update pictures look like last week's pictures with the exception of the props and rudders applied. All of the small parts have been glued down with the exception of the parts that would get in the way of the installing of the railings. Railings, rigging and a flat coat are about all that is left to do. Attachment:
USS North Carolina 036.jpg [ 166.38 KiB | Viewed 4052 times ]
Attachment:
USS North Carolina 037.jpg [ 165.45 KiB | Viewed 4052 times ]
My North Carolina is gettting close to being finished and I'm looking forward to that.
Martin, Thanks for your comment on the camo. I cut a lot of corners on appling the camo and I seems like I have to touch something else up everytime I go to do something to the ship. What a pain it has become.
This week's update pictures look like last week's pictures with the exception of the props and rudders applied. All of the small parts have been glued down with the exception of the parts that would get in the way of the installing of the railings. Railings, rigging and a flat coat are about all that is left to do.
[attachment=1]USS North Carolina 036.jpg[/attachment]
[attachment=0]USS North Carolina 037.jpg[/attachment]
My North Carolina is gettting close to being finished and I'm looking forward to that.
|
|
|
|
Posted: Sat Jul 20, 2013 9:28 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
I haven't had time to take any photos or work on the model this weekend (went to a live WWE pay per view Sunday!) but here are a few courtesy of the New Jersey IPMS from our meeting Friday A couple members really liked the way I painted the decks and asked for an explanation, I was shocked because compared to them I'm inexperienced!
I haven't had time to take any photos or work on the model this weekend (went to a live WWE pay per view Sunday!) but here are a few courtesy of the New Jersey IPMS from our meeting Friday
[img]https://sphotos-b.xx.fbcdn.net/hphotos-prn1/q87/s720x720/935819_622496944435795_531910389_n.jpg[/img] [img]https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/q86/s720x720/999811_622497667769056_724090233_n.jpg[/img] [img]https://sphotos-a.xx.fbcdn.net/hphotos-prn1/q84/s720x720/1010991_622498171102339_1246592510_n.jpg[/img]
A couple members really liked the way I painted the decks and asked for an explanation, I was shocked because compared to them I'm inexperienced!
|
|
|
|
Posted: Mon Jul 15, 2013 11:42 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Nice work Gordon! The camo looks great! Much neater than mine. I am envious!
Nice work Gordon! The camo looks great! Much neater than mine. I am envious!
|
|
|
|
Posted: Sun Jul 14, 2013 9:14 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Thanks JT, I checked it out. I now have all the major painting and almost all of the touch-ups done. It's on to the railings, small parts and all of those 20mm guns. Attachment:
USS North Carolina 034.jpg [ 174.78 KiB | Viewed 4181 times ]
Attachment:
USS North Carolina 035.jpg [ 175.31 KiB | Viewed 4181 times ]
Thanks JT, I checked it out.
I now have all the major painting and almost all of the touch-ups done. It's on to the railings, small parts and all of those 20mm guns.
[attachment=1]USS North Carolina 034.jpg[/attachment]
[attachment=0]USS North Carolina 035.jpg[/attachment]
|
|
|
|
Posted: Sat Jul 13, 2013 9:29 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Theres still a gentlemen selling Weth Deck Blue from polly on ebay, with decent pricing
Theres still a gentlemen selling Weth Deck Blue from polly on ebay, with decent pricing ;)
|
|
|
|
Posted: Thu Jul 11, 2013 11:58 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
I have now applied the flat black paint to the North Carolina, it took 7 1/2 + hours to mask it off and a 1/2 hour to paint. Yes, I'm glad that is finished. Now it's on to the Deck Blue 20B, I'm using the last bottle of Polly S paint I have for the deck. Attachment:
USS North Carolina 032.jpg [ 150.46 KiB | Viewed 4219 times ]
Attachment:
USS North Carolina 033.jpg [ 157.76 KiB | Viewed 4219 times ]
I have now applied the flat black paint to the North Carolina, it took 7 1/2 + hours to mask it off and a 1/2 hour to paint. Yes, I'm glad that is finished. Now it's on to the Deck Blue 20B, I'm using the last bottle of Polly S paint I have for the deck.
[attachment=1]USS North Carolina 032.jpg[/attachment]
[attachment=0]USS North Carolina 033.jpg[/attachment]
|
|
|
|
Posted: Thu Jul 11, 2013 10:28 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
nd, thanks for your comment. drd, Your progress pictures look great. Last week I started mounting the shields to the 20mm pedistals but that was more work (pia) than I wanted to do at the time so I only got a couple done before I called it quits for the night. I worked on painting the ammo lockers, I painted and put the quad 40mm guns together and painted some of the ships's rafts. This morning I masked off a couple of Light Gray areas that needed to be touched up and completed that task. I then started to mask the 16" Turrets for their coat of flat black paint and noticed that I missed painting Ocean Gray on half of the turrets. I touched up (painted) those areas that I missed. I started to mask off the ship so that I could apply the flat black paint and decided to paint the boot topping first and started masking the hull and I finally finished that project. Here is how things look today. Attachment:
USS North Carolina 031.jpg [ 178.12 KiB | Viewed 4312 times ]
Now onto masking for the black paint.
nd, thanks for your comment.
drd, Your progress pictures look great.
Last week I started mounting the shields to the 20mm pedistals but that was more work (pia) than I wanted to do at the time so I only got a couple done before I called it quits for the night. I worked on painting the ammo lockers, I painted and put the quad 40mm guns together and painted some of the ships's rafts.
This morning I masked off a couple of Light Gray areas that needed to be touched up and completed that task. I then started to mask the 16" Turrets for their coat of flat black paint and noticed that I missed painting Ocean Gray on half of the turrets. I touched up (painted) those areas that I missed. I started to mask off the ship so that I could apply the flat black paint and decided to paint the boot topping first and started masking the hull and I finally finished that project.
Here is how things look today.
[attachment=0]USS North Carolina 031.jpg[/attachment]
Now onto masking for the black paint.
|
|
|
|
Posted: Sat Jun 29, 2013 10:27 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
[img]http://i186.photobucket.com/albums/x90/drdoom1337/DSCN0155.jpg[/img] [img]http://i186.photobucket.com/albums/x90/drdoom1337/DSCN0156.jpg[/img] [img]http://i186.photobucket.com/albums/x90/drdoom1337/DSCN0157.jpg[/img] [img]http://i186.photobucket.com/albums/x90/drdoom1337/DSCN0158.jpg[/img] [img]http://i186.photobucket.com/albums/x90/drdoom1337/DSCN0159.jpg[/img] [img]http://i186.photobucket.com/albums/x90/drdoom1337/DSCN0160.jpg[/img]
|
|
|
|
Posted: Sat Jun 29, 2013 1:59 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Gordon Bjorklund wrote: The Ocean Gray has been apploied to the North Carolina and the touch ups have been completed. I'll let the paint cure for a couple of days and then start the masking for the Flat Black paint. Attachment: USS North Carolina 029.jpg Attachment: USS North Carolina 030.jpg Great progress, Gordon! She's starting to really flesh out. This is a great build thread. Keep it up!
[quote="Gordon Bjorklund"]The Ocean Gray has been apploied to the North Carolina and the touch ups have been completed. I'll let the paint cure for a couple of days and then start the masking for the Flat Black paint.
[attachment=1]USS North Carolina 029.jpg[/attachment]
[attachment=0]USS North Carolina 030.jpg[/attachment][/quote] Great progress, Gordon! She's starting to really flesh out. This is a great build thread. Keep it up! :thumbs_up_1:
|
|
|
|
Posted: Fri Jun 28, 2013 7:21 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
The Ocean Gray has been apploied to the North Carolina and the touch ups have been completed. I'll let the paint cure for a couple of days and then start the masking for the Flat Black paint. Attachment:
File comment: Port side
USS North Carolina 029.jpg [ 174.09 KiB | Viewed 4450 times ]
Attachment:
File comment: Srarboard side
USS North Carolina 030.jpg [ 169.33 KiB | Viewed 4450 times ]
The Ocean Gray has been apploied to the North Carolina and the touch ups have been completed. I'll let the paint cure for a couple of days and then start the masking for the Flat Black paint.
[attachment=1]USS North Carolina 029.jpg[/attachment]
[attachment=0]USS North Carolina 030.jpg[/attachment]
|
|
|
|
Posted: Sat Jun 22, 2013 4:20 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
FlowerPower wrote: Finished the lower hull Hey Rob, please keep the width of the boot-topping in mind, most overlooked by KM modellers. On a scale-350 model it should be around 6 or 7mm in width (depending on how far down it reached, there are different surces and different point of views, at least for Bismarck/Tirpitz, and I guess Scharnhorst/Gneisenau were not much different). On my Scharnies, I've opted for 6mm: (sorry for the bad shot, the WIP model is mothballed with others inside a showcase) I hand-painted a broad dark grey (NOT black) band around the hull, took 6mm Tamiya tape and applied it on that band (with its upper edge along the upper edge of the underbelly), then painted the hull above and below the masking tape (well, I applied the rust before painting the final coat, which then was lightly sanded to make the rust come through). And please, please make sure you get the various deck colours right, PM me if in doubt... (and if not) Happy modelling ~ Olaf!
[quote="FlowerPower"]Finished the lower hull[/quote]
Hey Rob, please keep the width of the boot-topping in mind, most overlooked by KM modellers. On a scale-350 model it should be around 6 or 7mm in width (depending on how far down it reached, there are different surces and different point of views, at least for Bismarck/Tirpitz, and I guess Scharnhorst/Gneisenau were not much different).
On my Scharnies, I've opted for 6mm:
[img]http://foto.arcor-online.net/palb/alben/98/2569898/6266356339343034.jpg[/img] (sorry for the bad shot, the WIP model is mothballed with others inside a showcase)
I hand-painted a broad dark grey (NOT black) band around the hull, took 6mm Tamiya tape and applied it on that band (with its upper edge along the upper edge of the underbelly), then painted the hull above and below the masking tape (well, I applied the rust before painting the final coat, which then was lightly sanded to make the rust come through).
And please, please make sure you get the various deck colours right, PM me if in doubt... (and if not)
Happy modelling ~ Olaf!
|
|
|
|
Posted: Sat Jun 22, 2013 3:52 pm |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Great group build, guys! Keep up the good work!
Great group build, guys! Keep up the good work!
|
|
|
|
Posted: Fri Jun 21, 2013 1:43 am |
|
|
|
|
|
Post subject: |
Re: 1/350 Battleship group build |
|
|
Great progress pictures drd. After seven plus hours of looking at pictures, cutting the tape and placing the big and small pieces on the model, the North Carolina is now ready for some Ocean Gray paint. That should happen tomorrow night. Attachment:
USS North Carolina 028.jpg [ 174.77 KiB | Viewed 4509 times ]
I'm looking forward to getting back to the USS Independence and her Navy Blue paint scheme.
Great progress pictures drd.
After seven plus hours of looking at pictures, cutting the tape and placing the big and small pieces on the model, the North Carolina is now ready for some Ocean Gray paint. That should happen tomorrow night.
[attachment=0]USS North Carolina 028.jpg[/attachment]
I'm looking forward to getting back to the USS Independence and her Navy Blue paint scheme.
|
|
|
|
Posted: Thu Jun 20, 2013 11:38 pm |
|
|
|
|