The Ship Model Forum
http://www.shipmodels.info/mws_forum/

Post Pics of Your Workbenches!
http://www.shipmodels.info/mws_forum/viewtopic.php?f=12&t=14416		 Page 7 of 26
Author:  Maximus [ Fri Feb 02, 2007 4:16 am ]
Post subject: 
:lol_pound: :lol_pound: ... thank you, Jim ... :lol_pound: :lol_pound:

yes, me else to is necessary grow ... :rolf_3: :rolf_3: :rolf_3:
Author:  Christian Bruer/Painter [ Sun Feb 11, 2007 6:06 pm ]
Post subject: 
There are a lot of interesting workbenches here in this thread. Some of them are really little shipyards – amazing!

Now I would like to show you the place where my models, planes and ships, grow up.

I have a small self made working desk with some IKEA stuff for all my tools, parts etc. under and on the right side of the desk.

Some of my models are next to the desk, mostly the ones I’m working on now or in the near future.

I like it to clean the desk after working on a model because I work mostly on different jobs and also I don’t want that my cat finishes the models!

:lol_1: :lol_1:

For displaying my models I have a glass cupboard at the backwall of my room with some place for my books in it.


Cheers

Christian
:wave_1: :thumbs_up_1:
Image

Image

Image

Image

Image

Image
Author:  Andy G [ Mon Feb 12, 2007 4:11 am ]
Post subject: 
Hi Christian,

This thread has turned into an Ikea showroom - I had two of those lights before one of my cats (the three-legged one shown on my Dreadnought build) decided it was one-too-many! :eyebrows:

For myself, I can't post pictures of my workbench: I simply don't have one. I'm very space-limited, stuck in a modern semi, and my work moves from:

The attic. Floored & lit - but very cold at this time of year, so while I'm frozen out of there for a few months, at least I know my insulation is ok! This is ideal for the big messy jobs, though I have to run power up from the floor below. Cutting frames, major assembly, etc. happens here. More careful work occurs on:

The kitchen table. Most of my hull planking occured here, as did the glassfibring of the inside of the hull. It's warm, handy for the kettle and <ahem> any Rock channels on the radio, and it keeps me in touch with the family - always a good move! Smaller work is done on the:

Coffee table. Less messy jobs (making details and boats, for example) takes place here. I tend to use a plastic box for the bits and pieces, along with my tools, and this means that I can scrape all the bits back into it at the end of a session.

I know a dedicated area that I can keep cat and child-finger free, and that I don't have to leave pristine every time I use it, would speed my building up, but it's impractical at the moment...meanwhile, I've been looking at the photos in this thread with a measure of envy and inspiration. I'm very impressed by many of the "workbenches" on show here (palaces, more like) and can only sympathise with others who have to make do with a corner of a table.

Andy
Author:  Jefgte [ Mon Feb 12, 2007 6:22 am ]
Post subject: 
:woo_hoo:

Congrat for your clean workbench Christian
:lol_spit_1:


Jef :thumbs_up_1:
Author:  Christian Bruer [ Tue Feb 13, 2007 4:12 pm ]
Post subject: 
Andy, the most important is to have fun building models. It doesn't matter if you have a large or a smal place for modeling. A friend of mine built all his models on the desk in the living room as I did when I started building models again for a few years.

Jef, I try to keep it clean because the room is smal and I have my finished models there too. So if you work, sanding etc. you have some dust there and that is not really good for finished models even when they are under glas :lol_1:

cheers :wave_1:

Christian
Author:  David Yarnell [ Wed Feb 14, 2007 3:20 pm ]
Post subject: 
Great looking workbenches!
One question, is this from IKEA?

Image
Author:  Avery Boyer [ Wed Feb 14, 2007 5:54 pm ]
Post subject: 
I would guess so. The design of the drawers give it away. On the other hand, there are those plastic wheels.....But I would still say IKEA.
Author:  Filipe Ramires [ Wed Feb 14, 2007 6:09 pm ]
Post subject: 
I believe so that's IKEA stuff...at least I own 2 of such things (very similar) one being for office stuff and other just for paints; wooden bases; modelling tools and photo-etch.
Author:  Christian Bruer [ Thu Feb 15, 2007 10:53 am ]
Post subject: 
@ David

Hi David,

this is IKEA stuff! I bought it for a cuple of years but I have not seen this roller box in my local area IKEA shop for a long time.

cheers :wave_1:

Christian
Author:  stu_fishing [ Tue Feb 27, 2007 12:50 pm ]
Post subject: 
..i can say, my workspace isn`t as clean as even jims :lol_3:

Image

my paint stash
Image


this is where I keep my spare parts, unfinished models, conversion sets, pe....
on the top you can see a trumpter seawolf of the alaskian coast

Image




..and my stash..which is growing and growing...wayyyy faster than i can build them..mostly 1:700 und 1:72 austrian airforce


Image


greetz thomas



edit by JIM B--made pics appear
edit- made pics smaller
Author:  les [ Wed Feb 28, 2007 9:50 am ]
Post subject: 
Those that have size restrictions could use a closet or one of the RTA Armoirs (sp?) or TV cabinets available from outfits like O'Sullivan. That way you have a dedicated area that can be closed when not in use and is either out of the way or a piece of furniture.
Author:  Gone Asiatic [ Thu Mar 01, 2007 6:29 am ]
Post subject:  The Shipyard
Image

Massena is in the foreground followed by Carnot (both Dream Festival Workshop), Maine (Combrig), the hulk of of a Combrig Suvuroff, two Yangtze Patrol hulls, and the nearly complete JDS Hatakaze (Skywave).

I`ll complete Massena, then either Maine or Carnot after that, probably another scratch build (USS Palos or Panay).
Author:  Torpedo [ Sat Mar 03, 2007 7:33 am ]
Post subject:  Before-after post
Hi Folks,
I like this thread - it shows me the same mess like on my desk almost everywhere. So this is what it usually looks like:
Image

But as I didn't find anything anymore I had to clean it up (as regularly every few months).
Image
Here's the whole place with pictures and plans on the wall and the model at his acutal condition in the front.
Image

Problem is, that it will look like the 1st picture in less than a week...
Author:  jackyoung [ Sat Mar 03, 2007 8:17 am ]
Post subject: 
Image

In fact. It`s a CHAIR. :big_grin:
Author:  Nektarios [ Sat Mar 10, 2007 8:06 am ]
Post subject: 
Some photos of my workbench and some of my ships.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image


and a link:
http://koufonektar.tripod.com/23/
Author:  Edward Pinniger [ Sat Mar 10, 2007 8:51 am ]
Post subject: 
A very impressive fleet you have there!
What's the ship at the top of the first two photos, with the large flight deck aft? Reminds me of a modernised version of the Currituck/Pine Island seaplane tender (old Revell kit)
Author:  Nektarios [ Sat Mar 10, 2007 9:00 am ]
Post subject: 
Thank you for your comments.The ship is AGF-3 USS La Salle a converted Raleigh class LPD.
Author:  Guest [ Sat Mar 10, 2007 9:07 am ]
Post subject: 
Biggest fleet I've seen. Lots of ships!!!! How did you find the time to do them? Happy modeling to you!
Author:  JIM BAUMANN [ Sat Mar 10, 2007 9:26 am ]
Post subject: 
Whoa..... :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

:lol_3: :lol_3: :lol_3: :lol_3: :lol_3: :lol_3: :faint: :faint: :faint: :big_eyes: :big_eyes:

Now THAT is a sight......
Image

stunning collection--they eyes can bearely take it all in!!

JIM BAUMANN :welcome: :welcome: :wave_1: :wave_1: :thumbs_up_1: :thumbs_up_1:
Author:  J. Soca [ Sat Mar 10, 2007 9:56 am ]
Post subject: 
Unbelievable, you got yourself a ship museum there. How long did it take you to complete all those models.
Page 7 of 26 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/