The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
Parts Picture Request 1/200 Missouri http://www.shipmodels.info/mws_forum/viewtopic.php?f=12&t=161533 |
Page 1 of 1 |
Author: | Thomas E. Johnson [ Sat Jan 23, 2016 12:47 am ] |
Post subject: | Parts Picture Request 1/200 Missouri |
Can someone that has the 1/200 Missouri model, please post some photos of the stock kit anti-aircraft guns? Thanks in advance. |
Author: | steinerman [ Sat Jan 23, 2016 10:55 am ] |
Post subject: | Re: Parts Picture Request 1/200 Missouri |
Good morning Tom, I'm n the middle of painting the utility room right now, but later on this afternoon I'll take some pictures for you. Do you want both the 20mm Orlikons as well as the 40mm Quad Bofors? Mine are still on the sprue (unassembled) if that makes any difference. I'm using Pontos 20mm and Veterans for the 40mm Bofors. |
Author: | steinerman [ Sat Jan 23, 2016 3:18 pm ] |
Post subject: | Re: Parts Picture Request 1/200 Missouri |
OK Tom, here are pictures of the AA guns that comes with the 1:200 Trumpeter USS Missouri: First, here are shots of the parts that make up the 20mm Orlekons: Attachment: Attachment: Attachment: Attachment: Attachment: I'm not sure what the max number of photos you can have on 1 post, so I'll show the 40mm Quad Bofors in the following post. |
Author: | steinerman [ Sat Jan 23, 2016 3:23 pm ] |
Post subject: | Re: Parts Picture Request 1/200 Missouri |
Here are the pictures of the 40mm Quads: Attachment: Attachment: Attachment: Attachment: Attachment: Attachment: Attachment: Attachment: Hope this helps you - Regards |
Author: | Thomas E. Johnson [ Sat Jan 23, 2016 10:32 pm ] |
Post subject: | Re: Parts Picture Request 1/200 Missouri |
Thank you for posting those. Should I decide that I want to buy and build this particular model, I'm still unsure if I would use all of the upgrade sets or just stick with the kit included parts. |
Author: | Fliger747 [ Sun Jan 24, 2016 1:12 pm ] |
Post subject: | Re: Parts Picture Request 1/200 Missouri |
For my 1:192 Alaska CB1 I used the Pontos mod's of the stock 40 mm, which replaces many parts of the mounts with PE to good effect. The Veterans Models 40 mm quads are probably even better. The 20 mm by Pontos are quite spectacular if a bit fussy to assemble in quantity. Cheers: Tom |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |