The Ship Model Forum

Hi Gents,

An old project I start back in the 1990 but at that time the hull did not turn out to good so was put in the loft.

Over the last year I’ve been looking at my old projects and thought Id have ago at correcting the errors on the hull and start it as a new project.


It has come out not too bad so I will completed the build. I’ll update with more photos as I go if people would be interested in this build.

_________________
Regards David

It's a good starting point!

I'm guessing that your storage space is better than mine - the old Graf Spee hull I have in my garage attic is in terrible condition.

_________________
ICBM Address: 44:78N 063:63W

Ex RCN, HMC Ships Gatineau, Athabaskan, Charlottetown, St. John's, Montreal, Charlottetown, Summerside, Montreal.

Hello Navyshooter Thanks,

When I put any models in the loft I usually box them up or rap them in polythene sheet.

_________________
Regards David

Hello Davidp

Which drawing are you referring to and is it the long or short hull version ?

_________________
Regards David

Davidp,


The plans I have are TC Design USS Fahrion FFG 22, two polish plans of ORP General T. Kosciuszko (F 273) ex USS Wadworth and ORP General K. Pulaski (F 272) Ex USS Clark. All of these drawings show different shape sonar domes and bilge keels, and stabiliser type and location.

The only photos of actual ships under water details I’ve seen are attached and are of the long hull OHP, the photos also show different locations and type of stabilisers.


So I’ve stuck with one drawing as I’ve found over the years unless you have actual photos of the ship at a set time under water detail is alway difficult to get right.

_________________
Regards David

Yes I can see there different, but on photo of FFG 46 dome is different from your photos.

The RAN ships had the Thales Spherion TMS4131 sonar system and the UNS used SQS-56, now I don’t know if the housing were different. Any it’s way to late to change, and as I said before unless I had an actual photo of FFG 20 USS ANTRIM I will not be changing as it would be major mod to the hull. ( Which id built in the 1990)


Thanks for your input.

_________________
Regards David

1/4 “ Ply frames covered with 1/32” birch ply and block balsa wood Transom.

_________________
Regards David

The hull was painted with three coats of resin, each sanded back, then it was painted with a flexible filler primer, next two coats of primer and sanded smooth then painted with the top coat.The dome is a plastic card framing, filled with resin mixed with French chalk and brass pined and glued to the keel.

_________________
Regards David

There's a shortage of Perry's on the board, so I'm definately following. Gorgeous hull (overall ship is a bit less gorgeous though) !
Keep us updated

_________________
The merchant shipyard

HI Dave nice to see you on here an in my opinion there is nothing up with your bow
sonar dome as the hull looks great an you are well on the way to building a fine model
as TBH im not a fan of the perry class due to that weird little funnel but if it did the job
all good an well an i will be following your great build so keep it comin
ATB Dave
chrisb

Thanks Chris

_________________
Regards David