The Ship Model Forum

Yes, it is H39 class As I wrote - mybe it will be the next paper model after Scharn

Another beauty you all have such great skills!!

Thanks

Catapult is done

That catapult looks very nice!

What references do you have in hands for the H klasse project? I've been trying to find these never-built subjects' plans for a while now, so I would be happy if I could get some from you...

Regards,
Aop

_________________
On the way:
--1/350 Tamiya DKM Tirpitz Nov 1944

--1/350 scratch-build HMS Lion never built battleship (1938)

And our artworks!

I spoke with experts in KM and they said that there are no plans or somethink like that. I have only sketches how the ship +- look like and thats all. It will be really ships puzzle. Shape of the hull I took from WOWS and superstructures will be made by this sketches. And thats all what I need to do it. Cause details like AA, rescue boats, guns...this all will be the same as for example Tirpitz. Yes, if this ship would be built in WW2 - there would be new equipment - modernized AA etc. but I have a plan to make it with "basic" equipment At the end - they started in 1939 so they could finish it in 1945 +-

I would doubt that the plans does not exist, as the design for these ships was finalized and two keels were actually laid down. This is what I found on this forum: http://www.modellschlachtschiffe.de/img ... h-plan.jpg
It looks like the original drawing to me, but it is so pixelated that it won't be of any use. If someone could point out the source of this, it would really help. Also, here is a pretty big model of the H39 and it looks accurate to me: http://forum.worldofwarships.com/index. ... ge__st__20

I also have a somewhat crude drawing of this ship, which includes profile, deck and body plans. I bought them from Strike Models. I could send you scans if you wish to see or use it as a reference.

Regards,
Aop

_________________
On the way:
--1/350 Tamiya DKM Tirpitz Nov 1944

--1/350 scratch-build HMS Lion never built battleship (1938)

And our artworks!

Yes yes. I know that drawing. As you wrote it looks like original plan. But its quality is terrible. Model what you sent I know too Look really good - think that it was pattern to 3D Fridriech der Grose in WOWS But there are a lot of question. For example catapult. One sketch has it on the stern of the ship, some in the middle - WOWS has it between turret C and D. In my opinion the best choise is first one - at the stern of the ship with rails from the hangars - like model what you sent.

If you have some plans/drawings - I will be happy to have it too You can send it to 987mis@gmail.com . Thank you

Hello everyone. I had a few of free time due to finishing the University. So after a long time I get back to my Sharnhorst. I finished C37 flaks and started to make 2 cranes what are placed on the front superstructure. Pulleys on the cranes are made of etchings. Each of this are made of three parts for creating a groove for the cables.

Front cranes done

I still find it hard to believe is a paper model






Jose