The Ship Model Forum
http://www.shipmodels.info/mws_forum/

Reconstruction of hull, Battleship BISMARCK, 1/100 scale
http://www.shipmodels.info/mws_forum/viewtopic.php?f=13&t=57213
Page 28 of 30

Author:  109 [ Tue Jan 21, 2014 2:21 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Mickosh3 wrote:
Hi, Bernd!

The illuminator's frames on your hull are looked very realistic!

But let me argue with you a little bit.

The Bismark's hull had no illuminators (portholes) in armored plates! The armored plates were located greatly below!
Please, look at the attached photo. It shows approx. Spt 25. There you can see the position of the armor plates (they are riveted) and rain rails (coamings) above the portholes.
with best regargs-
Anatoly.


Hi Anatoly,

Bow:
These areas include the shell plating of the hull above the bow armour (60 mm) and reaches up to the 50 mm upper deck armour. Its reaches forward as far as the 50 mm upper deck armour exists and it goes back to the citadel armour. This was made of 35 mm WhnA and towards the stem of 20 mm.

Stern:
These areas include the shell plating of the hull above the stern armour (80 mm) and reaches up to the 50 mm upper deck armour. Its reaches backwards frame 10.5 and it goes forward to the citadel armour. This was made of 35 mm WhnA.

Bye,

Bernd.

Author:  Mickosh3 [ Wed Jan 22, 2014 1:26 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Ok, Bernd, I think it was my fault - I find a short info about 35 mm in my book.

With best regards-
Anatoly.

Author:  109 [ Fri Jan 24, 2014 1:59 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Hi,

first sanding and priming ... obviously more to come ... :heh:

:wave_1:

Attachments:
Fenster 001.jpg
Fenster 001.jpg [ 35.57 KiB | Viewed 6402 times ]
Fenster 004.jpg
Fenster 004.jpg [ 49.61 KiB | Viewed 6402 times ]

Author:  silvershadow [ Tue May 06, 2014 7:17 am ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

This is really one amazing piece of work you have made here. The dedication is mindblowing for the time period already spend on the hull alone so far!
Well done!! Looking forward to see more of this :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Author:  Trogdor [ Fri Jun 12, 2015 10:30 am ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Im Curious where you got your plans for your ship i cant find a set of them anywhere?

Thanks Rob

Sorry if this has been asked i didnt see in your blog.

Author:  ModelMonkey [ Sat Jun 13, 2015 4:27 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Brilliant!

Author:  Richard OMalley [ Sat Jun 13, 2015 8:22 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

I have been away .Glad too see this build still going ! :woo_hoo:

Author:  109 [ Wed Jul 01, 2015 3:27 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

silvershadow wrote:
This is really one amazing piece of work you have made here. The dedication is mindblowing for the time period already spend on the hull alone so far!
Well done!! Looking forward to see more of this :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:


Thanks!

Author:  109 [ Wed Jul 01, 2015 3:28 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Trogdor wrote:
Im Curious where you got your plans for your ship i cant find a set of them anywhere?

Thanks Rob

Sorry if this has been asked i didnt see in your blog.


Hi,
I got some plans from a widow and thru the Internet.

Author:  109 [ Wed Jul 01, 2015 3:29 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Richard OMalley wrote:
I have been away .Glad too see this build still going ! :woo_hoo:

Thanks! I will resume work soon.

Bye.

Author:  109 [ Sun Aug 09, 2015 1:06 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Hi,

finally some work done on Bismarck. Installed the rest of the portholes. There were two different variants for unarmoured up to frame 10.5) and armoured areas of the outer shell.

Mre to come in the future ... :thumbs_up_1:

Image

Image

Author:  Capitão Norbert [ Mon Aug 10, 2015 7:46 am ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

wow fantastic my friend. top work :woo_hoo: :thumbs_up_1: :wave_1:

Author:  109 [ Sat Aug 15, 2015 8:11 am ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Hi,

weekend = modeling time :woo_hoo:

I call the aft ship with its tearoff edge finished in terms of shape.

Attachments:
Bismarck_Willmer_3.jpg
Bismarck_Willmer_3.jpg [ 113.41 KiB | Viewed 4883 times ]
Bismarck_Willmer_4.jpg
Bismarck_Willmer_4.jpg [ 84.77 KiB | Viewed 4883 times ]

Author:  ModelMonkey [ Sat Aug 15, 2015 7:38 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Superb!

Author:  109 [ Tue Aug 18, 2015 5:31 am ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

ModelMonkey wrote:
Superb!


Thanks!

Author:  dafi [ Tue Aug 18, 2015 2:32 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Nice to see you back on track!

XXXDAn

Author:  mzclw [ Thu Sep 17, 2015 10:08 pm ]
Post subject:  I need your help.

Hello, 109. I am from China, I am sorry, I do not understand English, can only rely on the translation software and your dialogue. It's a shock to see your model! I am also preparing to do a 1:200 Bismarck, want to learn from you, do a little more, but I do not have a very detailed information on the information, I hope to get your help, you can share your drawings to me?

Author:  mzclw [ Sun Sep 20, 2015 10:25 pm ]
Post subject:  Re: I need your help.

I only have a very low resolution hull details from the site, because I can't see clearly, so I hope to get your help! I am very much to get a clear hull detail to complete my 1:200 Bismarck model more perfectly. This is my email: 250645959@qq.com. thank you all!

Attachments:
File comment: Website screenshot
newslider2015_6-1170x400.jpg
newslider2015_6-1170x400.jpg [ 94.96 KiB | Viewed 4514 times ]

Author:  109 [ Wed Sep 23, 2015 1:13 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Hi mzlzr,

I don't have the drawings you mentioned above . You should buy that book. However that drawing seems to be of Tirpitz!!
As for details of Bismarck : there aren't drawings available that shows all details . You need to research all sources and draw your own conclusions!
In 1/2ooth scale most details are so small that you can neglect them.

Also my build report shows all areas in detail.

Okay? Bye

Author:  mzclw [ Wed Sep 23, 2015 10:51 pm ]
Post subject:  Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale

Thank you for your reply! Because I am not on the side of the majority of the site, plus the lack of information, so my work has become very difficult. I now have a set of Trumpeter Bismarck 1:200 and PHONTOS27001F super modified, see your work after I feel I am not good enough, I hope to learn from you. I am also considering doing a 1:100, all copper construction, hope you can help! Can you tell me the name of the book? What other Bismarck or Tirpitz's data is available?




Thank you very much!

Page 28 of 30 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/