*Inj. molded plastic* Upcoming Ship Kit Releases
Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot
-
Guest
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
On the 1/200 HMS HOOD release, note that the picture appears to show the original secondary armament, and also the torpedo lookout position on the forward tripod mast, both indicating an earlier version than her final configuration. I hope so.
- Wordy
- Posts: 76
- Joined: Wed Jul 30, 2008 4:49 am
- Location: Rotherham, England
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
It says on the webpage that it's not the box cover, but some artwork he's using as a illustration of HMS Hood for guidance only.Guest wrote:On the 1/200 HMS HOOD release, note that the picture appears to show the original secondary armament, and also the torpedo lookout position on the forward tripod mast, both indicating an earlier version than her final configuration. I hope so.
- Timmy C
- Posts: 12432
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
It was mentioned in another thread that discussed a page from the Trumpeter 2014/2015 catalogue, which included the Hood and Iowa.
De quoi s'agit-il?
-
JTninja
- Posts: 709
- Joined: Sun Aug 15, 2010 6:19 pm
- Location: Seattle Area
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Revell posted some kits that will be released between May and October, and a few ship items included. Might be reissues, dunno, don't remember a Revell Fletcher before.
https://www.facebook.com/media/set/?set ... 408&type=1
1/35 - D-Day Set (LCM3 & 4x4 Off Road Vehicle) - limited edition
1/144 - U.S. Navy Landing Ship Medium (LSM)
1/350 - Battleship U.S.S. New Jersey (1982) - limited & platinum edition
1/700 - U.S.S. Fletcher (DD-445)
1/1200 - Battleship U.S.S. Missouri (WWII)
https://www.facebook.com/media/set/?set ... 408&type=1
1/35 - D-Day Set (LCM3 & 4x4 Off Road Vehicle) - limited edition
1/144 - U.S. Navy Landing Ship Medium (LSM)
1/350 - Battleship U.S.S. New Jersey (1982) - limited & platinum edition
1/700 - U.S.S. Fletcher (DD-445)
1/1200 - Battleship U.S.S. Missouri (WWII)
"Also we will never see a 1/350 late war Enterprise from Dragon due to a paralyzing fear of success...." - Heavy Melder
Lots of unfinished model ships + attention issues = A busy slipway where nothing gets done!
Lots of unfinished model ships + attention issues = A busy slipway where nothing gets done!
-
Fleetman
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
I am willing to bet the Fletcher is a re-pop of the old Matchbox kit.
- Bill Clarke
- Posts: 1665
- Joined: Wed Jan 26, 2005 8:40 pm
- Location: Wagga Wagga NSW
- Timmy C
- Posts: 12432
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Fujimi released a 1/500 Nagato earlier already: http://www.1999.co.jp/eng/10114817
However! This time it is being sold significantly cheaper, at roughly half the price - I imagine it's a reaction to Hasegawa's reasonably-priced new-tooled 1/450 Yamato.
However! This time it is being sold significantly cheaper, at roughly half the price - I imagine it's a reaction to Hasegawa's reasonably-priced new-tooled 1/450 Yamato.
De quoi s'agit-il?
- Ady
- Posts: 523
- Joined: Tue Feb 15, 2011 4:16 pm
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
What's the quality of the Fujimi 1/500 Nagato like?
NVNC EST BIBENDVM
- Bill Clarke
- Posts: 1665
- Joined: Wed Jan 26, 2005 8:40 pm
- Location: Wagga Wagga NSW
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Well looking at the previous release, it's missing the fire control, binoculars, range finders, search light controllers from around the bridge.Ady wrote:What's the quality of the Fujimi 1/500 Nagato like?
Can't fathom Fujimi doing that
- Atma
- Posts: 3134
- Joined: Fri Apr 16, 2010 6:47 pm
- Location: Oslo, Norway
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
All the range finders are there, the only missing parts are the small binoculars and search light controllers. They are too small for 1.500 and better done in PE than plastic.Bill Clarke wrote:Well looking at the previous release, it's missing the fire control, binoculars, range finders, search light controllers from around the bridge.Ady wrote:What's the quality of the Fujimi 1/500 Nagato like?
Can't fathom Fujimi doing that
Better hull that the Hasegawa's 1/350, and is cheaper even the original expensive edition.Ady wrote:What's the quality of the Fujimi 1/500 Nagato like?
- Ady
- Posts: 523
- Joined: Tue Feb 15, 2011 4:16 pm
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Might have to have a dabble when it's released then!
NVNC EST BIBENDVM
- Hanchang Kuo
- Posts: 186
- Joined: Thu Jan 13, 2005 9:36 pm
- Location: Fremont, California
- Contact:
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
2014-2015 Catalog snippets of Trumpeter/Hobby Boss new items have been posted on Chinese website Baidu,
Trumpeter:
http://tieba.baidu.com/p/2804557302
Hobby Boss:
http://tieba.baidu.com/p/2804569608
Merit:
http://tieba.baidu.com/p/2804573205
Not much on ships but it shall make some of you very happy.
Trumpeter:
http://tieba.baidu.com/p/2804557302
Hobby Boss:
http://tieba.baidu.com/p/2804569608
Merit:
http://tieba.baidu.com/p/2804573205
Not much on ships but it shall make some of you very happy.
UN-altered REPRODUCTION and DISSEMINATION of this IMPORTANT Information is ENCOURAGED, ESPECIALLY to COMPUTER BULLETIN BOARDS.
- tko24
- Posts: 346
- Joined: Sun Oct 28, 2007 11:30 pm
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Obviously you didn't scan all the way down, because there was a 1/350 USS Texas and a 1/350 USS New York near the bottom of the new ship kit releases. I'm not interested in either ship, but there's going to be some very happy modelers over those two kits.
- Timmy C
- Posts: 12432
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Thanks a bunch, Hanchang! I've updated the list with all the new additions.
De quoi s'agit-il?
- aaube
- Posts: 112
- Joined: Tue Aug 27, 2013 4:26 pm
- Contact:
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Merit has some very large display cases with LED lights in their catalog...
- Bill Clarke
- Posts: 1665
- Joined: Wed Jan 26, 2005 8:40 pm
- Location: Wagga Wagga NSW
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
All the range finders are there, the only missing parts are the small binoculars and search light controllers. They are too small for 1.500 and better done in PE than plastic.Atma wrote: Well looking at the previous release, it's missing the fire control, binoculars, range finders, search light controllers from around the bridge.
Can't fathom Fujimi doing that
[/quote]
Hi Atma,
I may not have used the right terminology, I meant these:
http://www.bnamodelworld.com/veteran-models/vtw35038
And on the subject of small, if Veteran can make them in 1/700, http://www.bnamodelworld.com/veteran-models/vtw70010, then Fujimi should be able to make them in 1/500. It's just that the bridge area was absolutly packed with these types of controllers and looks so balnd without them. Same goes for the binoculars, they were on the top of the bridge and on most of the levels below.
These are the sorts of little details that really make a kit stand out, imho.
- Bill Clarke
- Posts: 1665
- Joined: Wed Jan 26, 2005 8:40 pm
- Location: Wagga Wagga NSW
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
A USS New York in 1/350
What next?
-
drdemented
- Posts: 126
- Joined: Tue Jul 18, 2006 8:28 am
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
USS New York and USS Texas in 1/350?

Under destruction:
1/350 Yamato
1/350 Titanic
1/350 Yamato
1/350 Titanic
- Phil R
- Posts: 897
- Joined: Sun May 06, 2007 2:17 am
- Location: Kingston-upon-Hull Yorkshire England
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Here is a link to Trumpy`s 2014 catalogue,loads of stuff !
http://tieba.baidu.com/p/2804557302
here we go again!!
Phil
http://tieba.baidu.com/p/2804557302
here we go again!!
Phil
" If your going though Hell ,keep going!" Winston Churchill
-
maxim
- Posts: 3967
- Joined: Tue Jun 14, 2005 6:23 am
- Location: Bonn
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
The link was already posted above together with the catalogues of HobbyBoss and Merit.
viewtopic.php?f=2&t=37762&start=520#p610993
Is it possible that the only new 1/700 kit of Trumpeter and HobbyBoss is the Iwo Jima? Another variant of an LHD?
True, there are several interesting 1/700 aircraft and it is nice that they available separately.
viewtopic.php?f=2&t=37762&start=520#p610993
Is it possible that the only new 1/700 kit of Trumpeter and HobbyBoss is the Iwo Jima? Another variant of an LHD?
True, there are several interesting 1/700 aircraft and it is nice that they available separately.
