The Ship Model Forum

The Ship Modelers Source
It is currently Sun Nov 18, 2018 7:22 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Battleship Enthusiast
PostPosted: Sun May 06, 2018 10:18 am 
Offline

Joined: Sun May 06, 2018 9:52 am
Posts: 5
Hi All

Just new to this board, I am a huge fan of WW2 era battleships and have built many plastic models of Ships / Planes and Tanks over the years and looking to expand into the scratch build world (Well scratch build may be subjective on these forums as I will be using both my 3D printer and CNC machine to help with the build, I know die hard Scratch Builders may say this is not Scratch Building).

My Favorite ship like lots of others is the Bismarck and she will be my first Scratch Build and I am still trying to decide to go decent size 1:200 or go crazy and build a 1:100 monster.

Finding plans of this ship isnt easy or cheap, Hans Gally doesn't seem to have a contactable email address, Nick Fox no longer exists that I can find, Harhaus plans are expensive and not as accurate from what I can tell, and I am not quite sure of the quality of the plans from the DSM Museum.

Any advice on plans would be great.

Also if I am going to build in either 1:200 or 1:100 what is the preferred wood and thickness of the ribs ect, was thinking 12mm Birch Plywood at 1:100 but that may be overkill.

Cheers

DJ


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Mon May 07, 2018 2:38 pm 
Offline

Joined: Sat Jan 17, 2009 2:12 pm
Posts: 1954
that is overkill & will make the model a lot heavier to handle. on my 1/144 scale HMS Warspite model, I used 1/4"x1/4" & 1/4"x1/2" balsawood to make the ribs with 1/4"x1/2" balsawood to make the keel. I skinned the hull with 1mm thick sheet plastic. I think you should be alright to use 3/16" plywood for your ribs.


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Mon May 07, 2018 3:16 pm 
Offline

Joined: Sun May 06, 2018 9:52 am
Posts: 5
Hi David

Thanks for the reply.

Never thought about balsa wood as I didn't think it would be strong enough for structural work.

5 mm ply for ribs, will look into it as 12mm can get a bit expensive.

WB


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Mon May 07, 2018 9:41 pm 
Offline

Joined: Sat Jan 17, 2009 2:12 pm
Posts: 1954
my model is just over 50" long wereas yours is almost double that. the model was never finished except for the hull & as it is over 35yrs old is still in excellent shape tho I plan to correct the shape of the torpedo bulges before finishing the ship 1 day. what are you going to clad your frame with?


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Tue May 08, 2018 3:21 pm 
Offline

Joined: Sun May 06, 2018 9:52 am
Posts: 5
Hi David

Yeah 2.51 meters in length, it's a beast.

I am planning to clad it in 2mm - 3mm of balsa wood then a 1mm layer of fibreglass, well that's what I have read and seems to be a good choice.

DJ


Report this post
Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 06, 2018 5:07 pm 
Offline

Joined: Wed Jan 02, 2013 1:15 am
Posts: 1886
Instead of balsa you might consider basswood since weight isn't a real consideration, or cedar if you have wood shop equipment available. For a 1:200 nominal scale a light fiberglass cloth such as used by the model airplane folks is fine.

Have fun!


Report this post
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group