The Ship Model Forum

The Ship Modelers Source
It is currently Thu Mar 28, 2024 6:49 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 1176 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10 ... 59  Next
Author Message
 Post subject:
PostPosted: Mon Jan 15, 2007 6:28 am 
Offline
User avatar

Joined: Thu May 11, 2006 7:00 pm
Posts: 107
Location: Ayr, On Scotland's sunshine coast
I'm itching to start this old girl.......the trouble is, I'm equally itching not to make a complete arse of it.....at £70 its not cheap (for me anyway) so you've got to at least make some effort at accuracy....I suppose the best policy really is to wait until EJ completes his, then read this thread while building it!!

Ok, I know the answer to this is probably "bits of them all"....HOWEVER, thats not an option for a one-off ship.....so....if I were only able to buy one PE set which would you cats recommend?


Top
 Profile  
Reply with quote  
PostPosted: Mon Jan 15, 2007 10:09 am 
Offline
User avatar

Joined: Tue Apr 04, 2006 10:47 pm
Posts: 91
Location: San Diego CA
I just started putting a few parts together on the 1/350 Trumpeter HOOD and so far so good. I chose the Gold Medal Models HOOD Photo Etch set, because in the few ships that I have built, the GMM photo etch sets have been easiest to use and more robust and forgiving. I have tried Toms photo etch on other models and thought it over etched in some places and too easily unintentionally deformed. I have used WEM photetch only once (on a 1/700 PRINZ EUGEN) and it worked well, love their doors and hatches, but it is more difficult to get in the US. I tend to limit my photo etch to hand rails, radars, catapults and cranes—no bulkhead replacements, so no need for the Lion Roar HOOD Set. Also, after building 1/35 armor for years, I now try to avoid resin replacement parts.

While I understand there are some accuracy issues with Trumpeter’s HOOD turrets, they look OK to me and I intend to use them on my model. I really like brass barrels, so I picked up the Trumpeter HOOD upgrade set and intend to use their brass barrels. I read some complaints about the Trumpeter brass barrel end shape, but the barrels look really good to my 1x eye and after painting, it likely won’t matter much. Also, the barrels and blast bags fit up really well to the Trumpeter turrets. Rich


Top
 Profile  
Reply with quote  
 Post subject: Barrels for HMS Hood
PostPosted: Mon Jan 15, 2007 8:49 pm 
Okay if we get the People in Germany to make the barrels, we need the drawings for them to scale them to 1/350. Does anyone have any info?

Its probably in the the book Big Guns or one British Battle ships of WW2 or between the wars, but mine are all in Deep Storage. I need 16 of these rifels, 8 for the Hood and 8 for the Queen Elizabeth


Top
  
Reply with quote  
 Post subject: Hood fun club
PostPosted: Tue Jan 16, 2007 10:50 am 
Offline
User avatar

Joined: Mon Apr 18, 2005 11:56 am
Posts: 211
Location: Vimercate ( Milano ) Italia
Ciao all,

having made the 1 / 700 models of both ITALERI and TAMIYA of HMS Hood, I think I shoudl apply here in as well.... I love the Hood as a ship.

Now getting ready for the TRUMPETER on 1 / 350,.. soon :cool_2:
@ Frank,

thank for the infos,...... :thumbs_up_1:

Ciao Antonio :surfer:


Top
 Profile  
Reply with quote  
 Post subject: HMS Hood, 1944
PostPosted: Sun Feb 04, 2007 2:29 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 2:57 pm
Posts: 378
Location: Roma
Guess this is the place to be shot for sacrilege... :)

This is my rendition of HMS Hood as rebuilt. With no will to be "scientifically" correct, it was built along the lines hypotithesyzed on the HMS Hood site, with the relevant difference of a different secondaries distribution.
As a divertessment, I tried to simulate wartime conditions by using at maximum scrap material from the previous models, the already built Hood and PoW you can find here:

http://xoomer.alice.it/bk/StefKits/HMS% ... index.html

and here:

http://xoomer.alice.it/bk/StefKits/HMS% ... index.html

Even the brigth red hull is the orginal one (had some problem in this, so the hull is not so homogeneous as it originally was)

all the kits are Heller, 1/400. The Hodd as refitted is not entirely done yet, as it lack its airplane (ready) and a black brushing on the rigging. The flags are missing too. Were the British were used to place the battle flag?

Scrapping two hulls
http://www.warshipmodels.com/~users/Ste ... HELLER.JPG
(I never liked the way I built them eons ago, anyway)

Emergency surgery
http://www.warshipmodels.com/~users/Stefano/Hood/H1.JPG

Final aspect
http://www.warshipmodels.com/~users/Ste ... IM2170.JPG
http://www.warshipmodels.com/~users/Ste ... IM2175.JPG

She was blue!!! :D
http://www.warshipmodels.com/~users/Ste ... IM2177.JPG

or wasn't she?
http://www.warshipmodels.com/~users/Ste ... IM2178.JPG
http://www.warshipmodels.com/~users/Ste ... IM2179.JPG
http://www.warshipmodels.com/~users/Ste ... IM2181.JPG
http://www.warshipmodels.com/~users/Ste ... IM2185.JPG

Now, I have a spare Heller Hood brand new in the box... volunteers? Anyone???

I know the model is far from be perfect (it is in line with my skills), but I am personally satisfied for the handsome aspect of the ship.

Due to the size of the pictures, moderator has changed them to links

_________________
Image
https://stefsap.wordpress.com


Top
 Profile  
Reply with quote  
 Post subject: Cool Model!
PostPosted: Thu Feb 08, 2007 10:41 am 
Offline

Joined: Thu Aug 04, 2005 2:50 pm
Posts: 338
Stefano,

Although I'm not big on "what if's" in general, I still like to see interpretations of what Hood may have looked like had she survived to reach her 1942 large repair. So, I think you've had a good idea.

That being said, you've done a nice job! In fact, if you'd like us to put one or two photos of your model in our article on the 1942 Large Repair on the Hood Association website, please e-mail me.

Frank

_________________
Frank Allen
H.M.S. Hood Association
http://www.hmshood.org.uk
Image


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Feb 08, 2007 9:40 pm 
Offline
User avatar

Joined: Wed Feb 09, 2005 5:45 pm
Posts: 1562
Location: Abu Dhabi
Hi, I need some help please.I'm building the Tamiya Hood,and I would like to know,,the part of the deck,which is dark brown,what material is? linoleum , corticene or just wood?

here are some pics of my build
http://i27.photobucket.com/albums/c192/ ... 000376.jpg
http://i27.photobucket.com/albums/c192/ ... 000373.jpg
http://i27.photobucket.com/albums/c192/ ... 000383.jpg
http://i27.photobucket.com/albums/c192/ ... 000372.jpg


Top
 Profile  
Reply with quote  
 Post subject: Hood Colours
PostPosted: Fri Feb 09, 2007 9:39 am 
Offline

Joined: Thu Aug 04, 2005 2:50 pm
Posts: 338
Answers to most Hood paint/colour questions (to include deck composition and colouring) can be found at the following location-
http://hmshood.com/hoodtoday/models/tips/hoodpaint.htm#ap507b

Additionally, you might want to check out our article on the Trumpeter kit. It outlines many of the mostly minor errors that need to be fixed. Its at http://hmshood.com/hoodtoday/models/trumpeter/trumpeter.htm

Frank

_________________
Frank Allen
H.M.S. Hood Association
http://www.hmshood.org.uk
Image


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Fri Feb 09, 2007 9:50 am 
Offline
User avatar

Joined: Wed Feb 09, 2005 5:45 pm
Posts: 1562
Location: Abu Dhabi
Thanks Frank,sure I'll keep and eye on that link,but my build is the Tamiya,not the Trumpy
:wave_1:


Top
 Profile  
Reply with quote  
 Post subject: The Same Errors Apply
PostPosted: Fri Feb 09, 2007 10:13 am 
Offline

Joined: Thu Aug 04, 2005 2:50 pm
Posts: 338
Hi Miguel,

Yes, I noticed it is the Tamiya kit. I still recommend viewing the Trumpeter article though, because most, if not all of the errors that are outlined there apply to all kits of Hood as sunk, to include the Tamiya kit. So, I generally recommend people consult it for ideas, etc.

I'm sure you are already well aware of it, but the Tamiya kit has a few extra issues to address (in addition to the problems shared with Trumpeter, etc). There is the lack of enclosed shelter deck detail, the paravane houses (too low), the motorboat workshop and disinfector room (Tamiya moulded these as one block structure instead of a two tiered structure), the after superstructure (missing the indentation on the port side), slightly wrong splinter shield shapes here and there, etc.

Despite this, its still a very good kit. Dated, but good. A perfect candidate for detailing work. Yours is coming along extremely nicely. It looks like you are REALLY detailing it! Please send us some photos when it is complete.

As for me, I shall wait for the 1/700 Trumpeter kit (there should be less work involved if they've listened to our latest suggestions).

Frank

_________________
Frank Allen
H.M.S. Hood Association
http://www.hmshood.org.uk
Image


Top
 Profile  
Reply with quote  
PostPosted: Fri Feb 09, 2007 4:11 pm 
Offline
User avatar

Joined: Wed Feb 09, 2005 5:45 pm
Posts: 1562
Location: Abu Dhabi
FW_Allen wrote:
Please send us some photos when it is complete.


Frank


You bet I'll do Frank,it will be an honor to me
:wave_1:


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Feb 11, 2007 8:03 am 
Offline
Model Monkey
Model Monkey

Joined: Sat Aug 20, 2005 9:27 pm
Posts: 3952
Location: USA
A wonderful shot of Hood:

Image

And another showing how the blast bags fit on the barrels at different elevations in the 1920s:

Image

_________________
Have fun, Monkey around.™

-Steve L.

Complete catalog: - https://www.model-monkey.com/
Follow Model Monkey® on Facebook: - https://www.facebook.com/modelmonkeybookandhobby


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Feb 21, 2007 8:12 pm 
hello---looking at building a HMS Hood, 1/600 Airfix model---is it fairly accurate or does it require quite a bit of work and extras to get it looking decent----haven't built ships in decades but have built a few Airfix Aircraft and am quite pleased with their quality for their price----am currrently gathering information for a Revell 1/426 Arizona build also----Thanks for any information---John


Top
  
Reply with quote  
 Post subject:
PostPosted: Thu Feb 22, 2007 5:16 am 
Offline

Joined: Wed Oct 11, 2006 5:46 am
Posts: 412
Anonymous wrote:
hello---looking at building a HMS Hood, 1/600 Airfix model---is it fairly accurate or does it require quite a bit of work and extras to get it looking decent----haven't built ships in decades but have built a few Airfix Aircraft and am quite pleased with their quality for their price----am currrently gathering information for a Revell 1/426 Arizona build also----Thanks for any information---John


Hi John, in my opinion none of the actual plastic Hood kit is so accurate to be built "straight out of box", some are better than other, but all will need a bit of care and love. The amount of work will depend of the amount of details you want for your Hood.

By the way when I built my HMS Hood the first step was to read all the contents of the HMS Hood association website ( http://www.hmshood.com ) there you will find the right information to evaluate the accuracy of your kit, than you will be able to chose the level of detail and the amount of work you will want to put in your representation.

Anatomy of the ship the battlecruiser Hood will be a great help too, but take care of some mistakes that recently EJFoeth found in all the Hood drawings and kit actually in commerce, you will find the explanation of thins again in the HMS Hood association website.

Good luck!

Dino


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Feb 22, 2007 4:11 pm 
Offline
User avatar

Joined: Sat Apr 29, 2006 7:36 am
Posts: 658
Location: Vigo, Spain
Steve Larsen wrote:


Steve, where have you found these pics ??? They are simply amazing !!!
Thanks in advance and best regards,

Willie.

_________________
Amen dico tibi, hodie mecum eris in paradiso (Lk 23,43).


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Thu Feb 22, 2007 5:56 pm 
Offline
User avatar

Joined: Sun Jan 23, 2005 6:20 am
Posts: 1382
Location: Warwickshire, England
I'll answer for Steve a few USN Historical Centre photos of British warships are online here Willie, enojoy! :big_grin: :-

http://www.history.navy.mil/photos/sh-fornv/uk/uk-name.htm


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Feb 24, 2007 3:49 pm 
Offline
User avatar

Joined: Sat Apr 29, 2006 7:36 am
Posts: 658
Location: Vigo, Spain
Laurence Batchelor wrote:
I'll answer for Steve a few USN Historical Centre photos of British warships are online here Willie, enojoy! :big_grin: :-
http://www.history.navy.mil/photos/sh-fornv/uk/uk-name.htm


Laurence,

Thanks a lot for the input. Will be of great help.
Best regards from Spain,

Willie.

_________________
Amen dico tibi, hodie mecum eris in paradiso (Lk 23,43).


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Mar 04, 2007 5:56 pm 
Offline
User avatar

Joined: Tue May 17, 2005 5:53 pm
Posts: 507
Location: DERBYSHIRE UK
Just a slight diversion - Is it me, or has anyone else noticed that the Trumpeter Hood is not quite as 'available' as it initially was?

None on UK ebay for weeks now.

Is it still in production?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Mar 31, 2007 2:35 am 
Has anyone seen the new Hood kit out there callled 'Build the Hood'?

The model is a 1:250 and is a weekly collect series like that Bismarck collection that was on TV a few weeks ago.

Cant find any detail of it yet other than some info via the Hood Assoc forum site and an info line of 0870 870 2575.

Maybe am wrong but I can't say I know of a 1:250 kit of the Hood, was fancying the Fleetscale 1:128 but the Mrs would do a back flip :rolf_3:


Top
  
Reply with quote  
 Post subject:
PostPosted: Tue Apr 03, 2007 8:46 am 
They say the Hood is 80 issues long @£4.99 per issue so yeah it is not cheap but not as expensive as that Bismarck series @140 issues @£4.99 and half as long in time to complete it!


Top
  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1176 posts ]  Go to page Previous  1 ... 4, 5, 6, 7, 8, 9, 10 ... 59  Next

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 59 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group