The Ship Model Forum

The Ship Modelers Source
It is currently Thu Mar 28, 2024 3:08 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 56 posts ]  Go to page Previous  1, 2, 3
Author Message
PostPosted: Wed Apr 10, 2013 3:53 am 
Offline
User avatar

Joined: Thu Mar 05, 2009 10:38 pm
Posts: 3121
So, what do people have on the SSBN(X)? I have found some stuff about both versions: the original 20 tube version and the later 16 missile version. The original looks like it is supposed to have bow planes and side, chin, and heavy bow sonar installation, and the reduced version has bow planes and only a bow sonar. There are particular descriptions that reflect the original versions, like the Virginias, had how planes vs fairwater planes on the sail.

Here are some conceptual drawings:
Image



http://eurasian-defence.ru/sites/defaul ... /ssbnx.jpg


Here is what the compromise may look like:
Image

Anyone have any ideas how a model of this could be accomplished?

_________________
Proper Preparation Prevents Poor Performance


Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 05, 2015 8:57 am 
Offline
User avatar

Joined: Fri Dec 12, 2008 12:44 pm
Posts: 1759
Location: Herk-de-Stad, Belgium
Quote:
Back in 2007, an aerial photo of an SSBN (SSBN 731) propeller ended up all over the internet, courtesy of Microsoft Virtual Earth. The propeller should have been covered in drydock, as mentioned by rx79gez8gundam above (interesting forum name, BTW. Any relation to Mr. Mxyzptlk of Superman comics?). Anyhow, it is not a real closeup, but you can get some idea at this link:
http://lewis.armscontrolwonk.com/archiv ... ret-screws

Hi guys,

I picked up this thread from the previous page, I did some measuring and calculations based on the satellite image. I come to the conclusion that the prop (screw) on the Ohio class is 22.5 feet in diameter, and this is a very likely value as it is exactly 1.5 times that of most SSN subs of the era, which seem to be 15 ft in diameter.

This dismisses the DML/Dragon/Italeri/Testors prop as way too small, probably based on a semi-official drawing I also found on the web, showing exactly the queer prop that can be found in the kit. Also the shape of the blades is hopeless, see this peek view on the tips of a real Trident SSBN prop:
Attachment:
georgia_drydock_full.jpg
georgia_drydock_full.jpg [ 38.71 KiB | Viewed 5179 times ]

I'm currently working with the firm Raboesch in NL whether they can make a credible brass example in 1:350 scale (19.6mm diameter), as they already have done it in larger RC scales. They are quite interested in my idea, let's see what comes out!

_________________
"I've heard there's a wicked war a-blazing, and the taste of war I know so very well
Even now I see the foreign flag a-raising, their guns on fire as we sail into hell"
Roger Whittaker +9/13/2023


Top
 Profile  
Reply with quote  
PostPosted: Sat Mar 07, 2015 10:12 am 
Offline
User avatar

Joined: Mon Apr 25, 2005 10:05 pm
Posts: 205
Location: Evergreen, Colorado
Large slow revolution speed propellor to avoid cavitation would make sense. Multiple thin blades with large curvature to breakup noise from the propellor cutting through hull flow as well.

Bill


Top
 Profile  
Reply with quote  
PostPosted: Sat Jul 25, 2015 2:44 am 
Offline
User avatar

Joined: Fri Dec 12, 2008 12:44 pm
Posts: 1759
Location: Herk-de-Stad, Belgium
Attachment:
SSBN -SSN screws.jpg
SSBN -SSN screws.jpg [ 26.15 KiB | Viewed 4974 times ]

Hi guys,

as it seems no-one is making a good 1:350 prop for the Los Angeles and Ohio classes I took the initiative: these resin props are based on the publicly available info on the internet. Diameter for the 688 screw (prop) is 15 ft, for the Ohio SSBN is 22.5 ft. The shafts are kept separate as you see, and can easily be inserted. The ring around the props are there to help in the casting and can easily be removed, but if someone wants a ringed 688i screw the ring might be reduced in width by filing and sanding.

I'm also making an earlier seven bladed variant with less skewback, which was used on every boat from the Skipjack and George Washington classes onwards, I think even on early 688 boats. I might even do a five petal-bladed version for the early Skipjack and George Washington, although these were never used operationally.

The screws are available from Naval Models in the Netherlands http://www.navalmodels.com, or send an email to info@navalmodels.com.
Attachment:
2015-03-24 12.10.43a.jpg
2015-03-24 12.10.43a.jpg [ 59.82 KiB | Viewed 4974 times ]

Cheers!

_________________
"I've heard there's a wicked war a-blazing, and the taste of war I know so very well
Even now I see the foreign flag a-raising, their guns on fire as we sail into hell"
Roger Whittaker +9/13/2023


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 17, 2015 5:01 pm 
Offline

Joined: Thu Jul 30, 2009 10:53 am
Posts: 71
Gents,

Does anyone know if Hobby Boss or anyone else for that matter is doing a new tooled kit of an Ohio class SSBN in 1/350 scale in the future? I'd love to see one done, as I am not a fan of the DML version.

TIA

Brad


Top
 Profile  
Reply with quote  
PostPosted: Sun Jul 30, 2017 8:30 am 
Offline
User avatar

Joined: Mon Oct 22, 2012 3:40 am
Posts: 583
Location: Vincennes, FRANCE
Maarten Schönfeld wrote:
Attachment:
SSBN -SSN screws.jpg

Hi guys,

as it seems no-one is making a good 1:350 prop for the Los Angeles and Ohio classes I took the initiative: these resin props are based on the publicly available info on the internet. Diameter for the 688 screw (prop) is 15 ft, for the Ohio SSBN is 22.5 ft. The shafts are kept separate as you see, and can easily be inserted. The ring around the props are there to help in the casting and can easily be removed, but if someone wants a ringed 688i screw the ring might be reduced in width by filing and sanding.

I'm also making an earlier seven bladed variant with less skewback, which was used on every boat from the Skipjack and George Washington classes onwards, I think even on early 688 boats. I might even do a five petal-bladed version for the early Skipjack and George Washington, although these were never used operationally.

The screws are available from Naval Models in the Netherlands http://www.navalmodels.com, or send an email to info@navalmodels.com.
Attachment:
2015-03-24 12.10.43a.jpg

Cheers!



hello ! do you still produce those propellers ? I need a Ohio class one.

can you give me the direct link to this item ? I cannot find it on your proposed website.

THX !!

_________________
Damn the torpedoes, full speed ahead! - David Glasgow Farragut


Top
 Profile  
Reply with quote  
PostPosted: Mon Jul 31, 2017 8:34 am 
Offline
User avatar

Joined: Fri Dec 12, 2008 12:44 pm
Posts: 1759
Location: Herk-de-Stad, Belgium
Quote:
hello ! do you still produce those propellers ? I need a Ohio class one.


Hi mister You :big_grin:

The props are still available from Naval Models, however their website is not up-to-date: they're working on it, I know.

You better send an email to the shop manager Michiel Woort, info@navalmodels.com or his private email, wijkergouw104@gmail.com. Give him my regards, I'm sure he has all the sub props in stock!

Mr. Maarten

_________________
"I've heard there's a wicked war a-blazing, and the taste of war I know so very well
Even now I see the foreign flag a-raising, their guns on fire as we sail into hell"
Roger Whittaker +9/13/2023


Top
 Profile  
Reply with quote  
PostPosted: Mon Jul 31, 2017 2:37 pm 
Offline
User avatar

Joined: Mon Oct 22, 2012 3:40 am
Posts: 583
Location: Vincennes, FRANCE
thanks ! will directly write at his personal adress, because I already searched at naval models and also written to them for now.

_________________
Damn the torpedoes, full speed ahead! - David Glasgow Farragut


Top
 Profile  
Reply with quote  
PostPosted: Thu Aug 17, 2017 7:57 am 
Offline
User avatar

Joined: Thu Nov 20, 2008 10:49 am
Posts: 27
Location: Sulphur, Louisiana
Hello. I am getting ready to start Dragon's USS Ohio kit. I will be building it as the Louisiana. Part of the build will be to fill in the panel lines. My question is, has the USN done away with the red antifouling on the hull? I have Squadron's Ohio class book and plan on using any photos from the USN site I can fine as reference.


Top
 Profile  
Reply with quote  
PostPosted: Thu Aug 17, 2017 6:32 pm 
Offline

Joined: Sat Feb 08, 2014 4:08 pm
Posts: 258
Location: United States
Kenny Loup wrote:
Hello. I am getting ready to start Dragon's USS Ohio kit. I will be building it as the Louisiana. Part of the build will be to fill in the panel lines. My question is, has the USN done away with the red antifouling on the hull? I have Squadron's Ohio class book and plan on using any photos from the USN site I can fine as reference.


Here's a photo of the Louisiana in drydock, but I'm not sure of the date.

https://thechive.files.wordpress.com/2014/02/uss-louisiana-ssbn-743-920-9.jpg?quality=85&strip=info&w=919

There are two current schemes:

Black above, red below

Maryland
http://i.imgur.com/5Tf2fM5.jpg

Rhode Island
http://i.imgur.com/6YEUV9U.jpg

All black

Pennsylvania
http://i.imgur.com/l7KvIYv.jpg

Henry M. Jackson
http://i.imgur.com/Kjpyqo1.jpg

I'm guessing that Atlantic Boats (drydocked at Newport News) have red antifouling while the Pacific boats (drydocked at Bremerton) are all black. I remember hearing that during the Cold War, boats overhauled at Mare Island would be painted all-black because of a California regulation on toxic paints. Could be apocryphal and I don't know if that would apply to Washington.

Jacob

_________________
Under Construction:
1/350 Typhoon
1/350 Skate
1/350 USS Nautilus
1/350 Tang
1/350 November
1/350 Hotel II
1/350 Alfa
1/350 George Washington
1/72 Type VIIC


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 21, 2017 1:59 pm 
Offline
User avatar

Joined: Thu Nov 20, 2008 10:49 am
Posts: 27
Location: Sulphur, Louisiana
Thank you Jacob. This is a big help.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 22, 2020 8:38 am 
Offline

Joined: Sat Nov 07, 2015 11:02 am
Posts: 160
I'm offering my Ohio screws for sale on eBay:

https://www.ebay.com/sch/mulsannemike/m ... pg=&_from=

If they show up sold, I will relist them. Or feel free to contact me directly.


Attachments:
20200219_132142-1.jpg
20200219_132142-1.jpg [ 84.33 KiB | Viewed 2383 times ]


Last edited by Woodstock74 on Thu Sep 10, 2020 4:50 pm, edited 2 times in total.
Top
 Profile  
Reply with quote  
PostPosted: Sat Jul 25, 2020 3:33 pm 
Offline
User avatar

Joined: Fri Dec 12, 2008 12:44 pm
Posts: 1759
Location: Herk-de-Stad, Belgium
Woodstock74 wrote:
I'm offering my Ohio screws for sale on eBay:

https://www.ebay.com/itm/1-350-Ohio-cla ... SwjzdeTYI8

If they show up sold, I will relist them. Or feel free to contact me directly.

Hi Woodstock,

Your screw look nice, and it is certainly much better than the kit screw. However, it seems to lack the blade twist. And I find it awfully expensive! wish you lot of sales of course. :thumbs_up_1:

A cheaper alternative (with blade twist) is still this prop: https://www.navalmodels.com/product/propeller-ohio-class/

So at least there is a choice now! :big_grin:

_________________
"I've heard there's a wicked war a-blazing, and the taste of war I know so very well
Even now I see the foreign flag a-raising, their guns on fire as we sail into hell"
Roger Whittaker +9/13/2023


Top
 Profile  
Reply with quote  
PostPosted: Sun Jul 26, 2020 9:42 am 
Offline

Joined: Sat Feb 08, 2014 4:08 pm
Posts: 258
Location: United States
If you want to incorporate some pitch into your propellers, you can use the following formulae:

p = 2πR*tan(α)

α = arctan[p/(2πR)]

where p is the pitch, R is the radial coordinate (0 at the axis of the propeller, and equal to the radius of the propeller at the tips of the blades), and α is the pitch angle (α=0 is perpendicular to the axis of the propeller, α=90 is parallel to the axis of the propeller).

Unless you have a good pitch curve (that plots p as a function of R), I would assume that the pitch is constant. Real propellers are typically "relieved" at the tips (the pitch is decreased) to reduce cavitation, but I doubt you'd be able to notice in 1/350 scale. If you don't have any data at all on pitch, I would start by assuming that α=45 at the hub and calculate the pitch from there.

Also, most modern skewed propellers have a rake of around 5 degrees or so. The older skewed propellers on the Permit, Sturgeon, and 41 For Freedom SSBNs appear to have much less rake.

_________________
Under Construction:
1/350 Typhoon
1/350 Skate
1/350 USS Nautilus
1/350 Tang
1/350 November
1/350 Hotel II
1/350 Alfa
1/350 George Washington
1/72 Type VIIC


Top
 Profile  
Reply with quote  
PostPosted: Thu Jul 08, 2021 9:26 pm 
Offline

Joined: Sat Nov 07, 2015 11:02 am
Posts: 160
Well that's interesting...

https://www.thedrive.com/the-war-zone/4 ... 6XkjbQmEME


Top
 Profile  
Reply with quote  
PostPosted: Sat Jul 10, 2021 9:23 am 
Offline
User avatar

Joined: Sun Feb 01, 2015 3:15 pm
Posts: 59
Location: New England
This additional array complements the existing line array which is not visible on the exterior of the hull. It is located in the lower portion of the forward ballast tanks.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 56 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group