The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
IJN Kongō, Full Hull, 1/1800 http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=164322 |
Page 1 of 2 |
Author: | speedbird [ Sun Jan 08, 2017 10:09 am ] |
Post subject: | IJN Kongō, Full Hull, 1/1800 |
Rr |
Author: | taskforce48 [ Sun Jan 08, 2017 12:35 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
That's just sick! my PE doesn't look that good in 1/350. Great job so far, Matt |
Author: | speedbird [ Sun Jan 08, 2017 12:58 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Thanks! There are some small gaps in the PE, there will be some platforms or stairs in these locations. |
Author: | Timmy C [ Sun Jan 08, 2017 1:53 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
That's fantastic! Which printing service did you use? And whose PE? |
Author: | Dan K [ Sun Jan 08, 2017 2:14 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
DAMN! That is nice! |
Author: | speedbird [ Sun Jan 08, 2017 2:16 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Shapeways and Toms Modelworks PE. It's the 1/1200 set, the difference in scale is really miniscule. |
Author: | medicmike [ Sun Jan 08, 2017 9:50 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Wow I have a hard enough time seeing my 1/700 stuff even with an optivisor. How do you do it in 1/1800? It looks fantastic! |
Author: | speedbird [ Sun Jan 08, 2017 10:36 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Rr |
Author: | speedbird [ Mon Jan 09, 2017 12:33 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Some photoetched aircraft [url=https://postimg.org/image/k4c8cgjlt/] |
Author: | speedbird [ Mon Jan 09, 2017 2:04 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Some 1/1800 F1Ms |
Author: | speedbird [ Tue Jan 10, 2017 10:13 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Lower hull is attatched, sanding is done, rudders, propellers, and shafts installed too. Aircraft, gun turrets, etc all done. Time for paint |
Author: | speedbird [ Wed Jan 11, 2017 1:52 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Airbrushing is all done, time to cut in with my collection of tiny paint brushes! Then washes. |
Author: | speedbird [ Thu Jan 12, 2017 12:25 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Kongō is finished: |
Author: | Aop Aur [ Thu Jan 12, 2017 1:11 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
You must have very good eyes to do that!! A shame I cannot make 1/350 models to look as good! By the way, the 3d printed ship look so nice. I could barely see any print lines! What material was it printed in? Aop |
Author: | speedbird [ Thu Jan 12, 2017 1:20 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Thanks! It's their new high-def black that Shapeways is using. There aren't any print lines it looks injection molded. |
Author: | speedbird [ Tue Jan 17, 2017 1:46 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Rr |
Author: | JIM BAUMANN [ Tue Jan 17, 2017 5:34 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
speedbird by name.... ==> impressive result and good overall look Paint certainly sharpened up the " printed " start point interesting and amusing! Jim Baumann |
Author: | speedbird [ Tue Jan 17, 2017 11:35 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Thanks Jim, The model overall is 120mm (4.75in) long. The red linen name plate is 30mm (1.25in) for scale. |
Author: | Angeliccypher [ Tue Jan 17, 2017 11:56 am ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
That is simply amazing |
Author: | speedbird [ Tue Jan 17, 2017 12:10 pm ] |
Post subject: | Re: IJN Kongō, Full Hull, 1/1800 |
Thanks Gabriel! |
Page 1 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |