The Ship Model Forum
http://www.shipmodels.info/mws_forum/

1/350 USS Samuel B Roberts FRAM I 1966
http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=166313
Page 2 of 3

Author:  medicmike [ Fri Jan 12, 2018 9:43 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Got the turrets assembled and detailed minus a couple little touch-ups here and there. I added the PE ladders and brass 5" barrels. Started working on the ASROC launcher last night and hope to get it cleaned up, primed, painted, and installed this weekend along with some rails and other details.
Aft turret
Attachment:
Roberts (26).jpg
Roberts (26).jpg [ 59.17 KiB | Viewed 2427 times ]

Forward turret
Attachment:
Roberts (27).jpg
Roberts (27).jpg [ 44.36 KiB | Viewed 2427 times ]

Author:  navydavesof [ Sat Jan 13, 2018 11:29 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Great detail! Well done!

Author:  medicmike [ Mon Jan 15, 2018 11:37 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Was able to get a bit more done over the weekend. Got the stacks completed and installed, got the turrets installed, and started on some of the rails.
Attachment:
Roberts (28).jpg
Roberts (28).jpg [ 54.3 KiB | Viewed 2370 times ]

Attachment:
Roberts (29).jpg
Roberts (29).jpg [ 48.08 KiB | Viewed 2370 times ]

Attachment:
Roberts (30).jpg
Roberts (30).jpg [ 90.38 KiB | Viewed 2370 times ]

Attachment:
Roberts (31).jpg
Roberts (31).jpg [ 59.95 KiB | Viewed 2370 times ]

Attachment:
Roberts (32).jpg
Roberts (32).jpg [ 51.64 KiB | Viewed 2370 times ]

Author:  medicmike [ Wed Jan 17, 2018 8:52 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Did a little more PE work on the aft superstructure. Installed the ASROC launcher and scratched the deck supports with styrene I had. Started cleaning up some of the smaller detail parts and should have them ready soon.
Attachment:
Roberts (33).jpg
Roberts (33).jpg [ 80.83 KiB | Viewed 2336 times ]

Attachment:
Roberts (34).jpg
Roberts (34).jpg [ 75.61 KiB | Viewed 2336 times ]

Author:  medicmike [ Fri Jan 19, 2018 2:52 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Did a little more PE work on the sides. Still needs cleaned up, sanded a bit, and then paint touched up. Also started cleaning and prepping the parts for the aft radar tower and such.
Attachment:
IMG_3631.jpg
IMG_3631.jpg [ 69.05 KiB | Viewed 2307 times ]

Author:  medicmike [ Mon Jan 22, 2018 11:46 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Did some touch up sanding and painting. Added some rails to the forward superstructure and started working on the aft radar tower. Still cleaning up some of the detail parts and should be able to start adding them in a day or two.
Attachment:
Roberts (36).jpg
Roberts (36).jpg [ 80.5 KiB | Viewed 2253 times ]

Attachment:
Roberts (37).jpg
Roberts (37).jpg [ 66.33 KiB | Viewed 2253 times ]

Author:  medicmike [ Wed Jan 24, 2018 3:31 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

More work on the aft radar tower and added the forward torpedo tubes.
Attachment:
Roberts (38).jpg
Roberts (38).jpg [ 76.74 KiB | Viewed 2216 times ]

Attachment:
Roberts (39).jpg
Roberts (39).jpg [ 76.53 KiB | Viewed 2216 times ]

Author:  Jon [ Thu Jan 25, 2018 9:09 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Doing a great job. Enjoying the photos.

Author:  medicmike [ Sat Jan 27, 2018 9:22 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Did more work on the aft radar tower and also did the flight deck decals and netting. The forward mast included in the kit is mostly unusable so I am going to be scratching most of it. The top section is great but the whole lower section is just terrible. I picked up some stuff at the hobby store today so I can start working on that tomorrow. I also have more PE to add in some areas and some of the finer detail parts to finish painting up and get installed. She is progressing at a good pace and so far, I am really enjoying my first resin build.
Attachment:
Roberts (40).jpg
Roberts (40).jpg [ 93.58 KiB | Viewed 2128 times ]

Attachment:
Roberts (41).jpg
Roberts (41).jpg [ 62.77 KiB | Viewed 2128 times ]

Attachment:
Roberts (42).jpg
Roberts (42).jpg [ 71.99 KiB | Viewed 2128 times ]

Attachment:
Roberts (43).jpg
Roberts (43).jpg [ 75.98 KiB | Viewed 2128 times ]

Author:  medicmike [ Tue Jan 30, 2018 2:21 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Flu bug has bitten everyone at home except me but still got a little done over the weekend. Need a little touching up but got the anchor chains installed and a little more detail work on the rear stack and radar platform. Started working on the new forward mast and should have some progress pics in a couple days.
Attachment:
Roberts (44).jpg
Roberts (44).jpg [ 58.14 KiB | Viewed 2078 times ]

Attachment:
Roberts (45).jpg
Roberts (45).jpg [ 96.07 KiB | Viewed 2078 times ]

Author:  Rob Jansen [ Fri Feb 02, 2018 11:45 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Mike,
Coming along very nicely.
Thank you for all the detailed pictures.

Author:  medicmike [ Fri Feb 02, 2018 1:29 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Thanks Rob. I have been doing a bit of the detail work on her and have added a couple things that were not included in the kit. I made them from styrene rod and such. I have spent quite a bit of time constructing the new forward mast assembly from scratch. The one in the kit was just terrible and wrong as well. I should have pics of that process soon.
Attachment:
Roberts (46).jpg
Roberts (46).jpg [ 100.06 KiB | Viewed 2022 times ]

Attachment:
Roberts (47).jpg
Roberts (47).jpg [ 81.64 KiB | Viewed 2022 times ]

Author:  medicmike [ Mon Feb 05, 2018 11:52 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

I finished up scratch building the new main mast. I did it with styrene rod of different sizes (2mm, 1mm, 0.5mm) plus some styrene sheet. I added some spare PE for the platforms and made the radar mounts from styrene rod. I also began adding more of the main deck railings this weekend but forgot to grab pics of those. Here are the pics of the mast construction and I should have additional pics of the hull and such in a couple days.
Attachment:
Roberts (48).jpg
Roberts (48).jpg [ 85.17 KiB | Viewed 1967 times ]

Attachment:
Roberts (49).jpg
Roberts (49).jpg [ 68.52 KiB | Viewed 1967 times ]

Attachment:
Roberts (50).jpg
Roberts (50).jpg [ 75.9 KiB | Viewed 1967 times ]

Attachment:
Roberts (51).jpg
Roberts (51).jpg [ 85.86 KiB | Viewed 1967 times ]

Attachment:
Roberts (52).jpg
Roberts (52).jpg [ 73.78 KiB | Viewed 1967 times ]

Attachment:
Roberts (53).jpg
Roberts (53).jpg [ 72.39 KiB | Viewed 1967 times ]

Attachment:
Roberts (54).jpg
Roberts (54).jpg [ 66.5 KiB | Viewed 1967 times ]

Attachment:
Roberts (55).jpg
Roberts (55).jpg [ 75.01 KiB | Viewed 1967 times ]

Author:  medicmike [ Mon Feb 05, 2018 11:56 am ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Here are the rest of the mast pics. This was my first time ever scratch building a mast assembly. It isn't perfect but I am very happy with how it turned out and I learned some good stuff. The only part I used from the kit was the top section that is mounted on the top platform. All the rest of the kit mast parts were trashed.
Attachment:
Roberts (56).jpg
Roberts (56).jpg [ 72.47 KiB | Viewed 1967 times ]

Attachment:
Roberts (57).jpg
Roberts (57).jpg [ 70.88 KiB | Viewed 1967 times ]

Attachment:
Roberts (58).jpg
Roberts (58).jpg [ 68.63 KiB | Viewed 1967 times ]

Attachment:
Roberts (59).jpg
Roberts (59).jpg [ 86.01 KiB | Viewed 1967 times ]

Author:  medicmike [ Fri Feb 09, 2018 2:06 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Did a little more detail work. Started on some of the rigging and antennas and did some more rail work. I ran out of Haze Gray paint but should have some more in a day or two and then more work.
Attachment:
Roberts (60).jpg
Roberts (60).jpg [ 80.17 KiB | Viewed 1930 times ]

Attachment:
Roberts (61).jpg
Roberts (61).jpg [ 87.03 KiB | Viewed 1930 times ]

Attachment:
Roberts (62).jpg
Roberts (62).jpg [ 59.67 KiB | Viewed 1930 times ]

Author:  medicmike [ Tue Feb 13, 2018 12:37 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

My paint hasn't arrived yet but should be here this week. Added the rest of the main deck railings. Going to start working on more of the rigging tonight or tomorrow.
Attachment:
Roberts (63).jpg
Roberts (63).jpg [ 75.36 KiB | Viewed 1889 times ]

Attachment:
Roberts (64).jpg
Roberts (64).jpg [ 70.68 KiB | Viewed 1889 times ]

Author:  medicmike [ Sat Feb 17, 2018 9:45 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Did some work on the forward mast radars and such. My paint arrived so I have been cleaning up the hull a bit and getting ready for some touch-up work. Did a little more rigging work after I took these pics and hope to finish that and some other small detail stuff up tomorrow. Hoping to get the detail work done and start on the decals by next weekend.
Attachment:
Roberts (65).jpg
Roberts (65).jpg [ 100.34 KiB | Viewed 1856 times ]

Attachment:
Roberts (66).jpg
Roberts (66).jpg [ 101.7 KiB | Viewed 1856 times ]

Author:  gtbred [ Sat Feb 17, 2018 11:09 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

That is nice. :thumbs_up_1:

Author:  medicmike [ Sun Feb 18, 2018 9:45 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

Thanks gtbred :thumbs_up_1:

Did some more rigging, fine detail, and touch-up work tonight. Still need to make and add the antennas but should be ready for decals in a few days.
Attachment:
Roberts (67).jpg
Roberts (67).jpg [ 88.32 KiB | Viewed 1822 times ]

Attachment:
Roberts (68).jpg
Roberts (68).jpg [ 94.86 KiB | Viewed 1822 times ]

Attachment:
Roberts (69).jpg
Roberts (69).jpg [ 67.4 KiB | Viewed 1822 times ]

Author:  medicmike [ Mon Feb 19, 2018 8:53 pm ]
Post subject:  Re: 1/350 USS Samuel B Roberts FRAM I 1966

More detail work. Finished up the rigging and added the antennas. I forgot the one on top of the forward mast so I added that one after I took the pictures. Most of the touch-up work is done as well now. Going to try and get the decals on over the next couple days and then start working on the sea base for her.
Attachment:
Roberts (70).jpg
Roberts (70).jpg [ 96.3 KiB | Viewed 1790 times ]

Attachment:
Roberts (71).jpg
Roberts (71).jpg [ 122.74 KiB | Viewed 1790 times ]

Page 2 of 3 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/