| The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
| re-do of old 1/535 Iowa revell http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=168122 |
Page 9 of 12 |
| Author: | Triumph68 [ Thu Dec 03, 2020 3:08 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
could indeed... but as they are packet by 4 and I need 10, means I need 3 pack (with 2 unused and won't be used as this scale isn't my scale) ... so about 18 US + shipping... that's more than the price of the kit and only for 1 type of guns, ... I'll make them |
|
| Author: | Triumph68 [ Sat Dec 05, 2020 4:00 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
not sure yet how I'm gonna do the guns... but this is an idea for the barrels Attachment: 1.jpg [ 395.2 KiB | Viewed 1500 times ] finally fixed bridge part Attachment: 3 (2).jpg [ 206.42 KiB | Viewed 1493 times ] Attachment: 2.jpg [ 339.32 KiB | Viewed 1493 times ] |
|
| Author: | Triumph68 [ Sun Dec 06, 2020 11:16 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
concentrated my attention on rear stack ... Attachment: 1.jpg [ 163.9 KiB | Viewed 1456 times ] all on picture is now fixed except rear stack Attachment: 2.jpg [ 286.45 KiB | Viewed 1456 times ] Attachment: 3.jpg [ 257.82 KiB | Viewed 1456 times ] Attachment: 4.jpg [ 262.73 KiB | Viewed 1456 times ] |
|
| Author: | Triumph68 [ Mon Dec 07, 2020 4:42 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
I thought I'd give Chuck and all that follow a little pleasure... how Center part is now compared with how it was Attachment: 6.jpg [ 178.47 KiB | Viewed 1433 times ] and a bit more in detail Attachment: 4.jpg [ 251.35 KiB | Viewed 1433 times ] Attachment: 5.jpg [ 244.04 KiB | Viewed 1433 times ] |
|
| Author: | Triumph68 [ Tue Dec 08, 2020 2:26 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
think I'll stop here adding on rear stack (except filling the tubs with what should be in of course) and finally also fixed it Attachment: 3.jpg [ 292.76 KiB | Viewed 1404 times ] |
|
| Author: | Triumph68 [ Fri Dec 11, 2020 2:10 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
some more stuff in the make Attachment: 1.jpg [ 310.66 KiB | Viewed 1355 times ] Attachment: 2.jpg [ 209.81 KiB | Viewed 1355 times ] Attachment: 4.jpg [ 59.49 KiB | Viewed 1355 times ] |
|
| Author: | Triumph68 [ Fri Dec 11, 2020 7:00 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
further evolution... Attachment: 1.jpg [ 365.83 KiB | Viewed 1345 times ] all propeller blades are made and half are more fine-tuned Attachment: 2.jpg [ 301.26 KiB | Viewed 1345 times ] |
|
| Author: | Triumph68 [ Sat Dec 12, 2020 11:53 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
my way of doing... first the holes Attachment: 1.jpg [ 368.72 KiB | Viewed 1296 times ] connecting the holes with cutter Attachment: 2.jpg [ 267.93 KiB | Viewed 1296 times ] fine tuning... 16 are done out of 30 and 3 deck traps out of 6 Attachment: 3.jpg [ 214.46 KiB | Viewed 1296 times ] |
|
| Author: | Triumph68 [ Mon Dec 14, 2020 11:20 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
all 30 needed and all protected deck-traps are done Attachment: 1.jpg [ 135.75 KiB | Viewed 1241 times ] |
|
| Author: | Triumph68 [ Thu Dec 17, 2020 2:07 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
things go slowly ...lack of time... still, 2 new protection walls made Attachment: 1.jpg [ 288.04 KiB | Viewed 1189 times ] |
|
| Author: | Triumph68 [ Sat Dec 19, 2020 5:47 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
worked a bit on the secondary guns Attachment: 1.jpg [ 243.36 KiB | Viewed 1157 times ] details.... impossible to show each individual piece so I took the ship in 4 close ups ... every piece except the main guns is fixed, enjoy Attachment: 2.jpg [ 114.39 KiB | Viewed 1157 times ] Attachment: 3.jpg [ 235.63 KiB | Viewed 1157 times ] Attachment: 4.jpg [ 234.2 KiB | Viewed 1157 times ] Attachment: 5.jpg [ 135.33 KiB | Viewed 1157 times ] |
|
| Author: | Triumph68 [ Sun Dec 20, 2020 12:08 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
a little try scratch Attachment: 1.jpg [ 339.27 KiB | Viewed 1125 times ] Attachment: 2.jpg [ 150.6 KiB | Viewed 1125 times ] Attachment: 3.jpg [ 245.4 KiB | Viewed 1125 times ] Attachment: 4.jpg [ 63.64 KiB | Viewed 1125 times ] |
|
| Author: | Triumph68 [ Mon Dec 21, 2020 6:55 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
today I fixed them on board... Attachment: 1.jpg [ 162.26 KiB | Viewed 1103 times ] |
|
| Author: | Triumph68 [ Mon Dec 21, 2020 10:56 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
started 5 more... but a bit smaller Attachment: 4.jpg [ 80.76 KiB | Viewed 1085 times ] forgot this one Attachment: 1.jpg [ 222.09 KiB | Viewed 1085 times ] new walls and support beams Attachment: 2.jpg [ 274.51 KiB | Viewed 1085 times ] area improvement Attachment: 3.jpg [ 208.72 KiB | Viewed 1085 times ] |
|
| Author: | itchygroin [ Mon Dec 21, 2020 5:54 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
This is looking good! Makes me want to re-do my old USS New Jersey! Keep it up! |
|
| Author: | Triumph68 [ Tue Dec 22, 2020 12:07 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
txs Itchy, do so, do so and make that old kit a beauty doing many stuff at same time ... but then...there are man details to do Attachment: 1.jpg [ 373.05 KiB | Viewed 1537 times ] a forgotten thing Attachment: 2.jpg [ 319.79 KiB | Viewed 1537 times ] completing walls and adding stairs Attachment: 3.jpg [ 309.63 KiB | Viewed 1537 times ] making and adding the mushroom looking I think air intakes Attachment: 4.jpg [ 227.12 KiB | Viewed 1537 times ] |
|
| Author: | Triumph68 [ Thu Dec 24, 2020 12:22 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
these have been real difficult AA walls to make, probably because there are 2 identical and they are the lowest of them all Attachment: 1.jpg [ 192.67 KiB | Viewed 1512 times ] a little overview Attachment: 2.jpg [ 164.24 KiB | Viewed 1512 times ] Attachment: 3.jpg [ 161.12 KiB | Viewed 1512 times ] Attachment: 4.jpg [ 110.67 KiB | Viewed 1512 times ] |
|
| Author: | warspite63 [ Thu Dec 24, 2020 1:57 pm ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
Brilliant work on a toy-like original - a true labour of love! Bravo!! |
|
| Author: | pascalemod [ Fri Dec 25, 2020 8:32 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
Love the transformation, on a step back you really get taken away. |
|
| Author: | Triumph68 [ Sat Dec 26, 2020 9:28 am ] |
| Post subject: | Re: re-do of old 1/535 Iowa revell |
Txs Pascal and Warspite today family day....not much time for modelling, still 1 more wall done...I know its not much... but each piece done, brings it closer to the end Attachment: 1.jpg [ 266.49 KiB | Viewed 1441 times ] |
|
| Page 9 of 12 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|