| The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
| Carrier Builders Yard, whats on the Slipway http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=18158 |
Page 234 of 241 |
| Author: | MAJOR-B [ Thu Dec 29, 2016 3:47 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Good day, I am looking at the CVV or Medium Aircraft carrier that was funded and then disappeared when carter left office. So I have two hulls for a starting point. The knock off enterprise and French carrier Charles D. I am leaning towards the Charles d because to make it about the right size and has twin screws. I know I have asked in the main forum about the size of the aircraft and weapons. According to the specs the CVV was supposed to carry 50 aircraft (Midway final air wing) and two C.I.W.S. I think I would keep the VLS module because that would make less platforms needed for RAMS and/or NSSM. As far the Enterprise kit the hull would have to be shorten and elevators be re-located the CVV had on two elevators.. |
|
| Author: | Mark McKinnis [ Thu Dec 29, 2016 5:37 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
gtbred wrote: Hey Mark, how did your move go? Hopefully everything was not in danger from your moving. Every Supercarrier is on hold until I finish Wasp and the DD. Take care! Hi Red, Move went well from the model perspective. I spent $700 running from Hurricane Mathew but no damage. We got pretty lucky on that one. It swung by about 30 miles from the house. I lost 3 1/72 aircraft in the move. A B-29, a B-26, and an RA-5C. The ships did well. Kennedy is almost done. I am doing the yellow gear now and a 1/350 C-1 Trader from L'Arsenal. I got side tracked on a couple of 1/72 Phantoms and some 1/144 Airliners. I have also started building 1/350 scale CVW-9 1991 for Nimitz. Hope everyone is doing well. Happy Holidays, Mark |
|
| Author: | kidcurrie42 [ Thu Dec 29, 2016 9:54 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Hello Guys, I hope everyone has had a great Christmas and I wish you all a very Happy and Prosperous New Year. Well I see some Impressive work has been done, Not done a lot on the Carrier side at all..... Hopefully....... Hopefully my Mojo is coming back...... hopefully 2017 will be a good Carrier year for me. But it is good to see you all keeping the Slipway busy  Good to hear that you gave Hurricane Mathew the slip Mark, as did i. Happy Modeling John |
|
| Author: | gtbred [ Sun Jan 08, 2017 4:13 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Happy to here from you John! Hope the New Year will be kind to you! |
|
| Author: | gtbred [ Sun Feb 12, 2017 2:11 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Wasp is almost done. Have wait for some things from Shapeways to go on America. Flight deck for Kitty Hawk is being work on at this moment. It has been a good year for Supercarriers. Now if someone will do a 1/350 Ranger CVA-61 all guns! |
|
| Author: | Mark McKinnis [ Sun Feb 12, 2017 5:57 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
gtbred wrote: It has been a good year for Supercarriers. Now if someone will do a 1/350 Ranger CVA-61 all guns! +1
|
|
| Author: | boomstick68 [ Sun Feb 12, 2017 11:59 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Indeed...
|
|
| Author: | kidcurrie42 [ Mon Feb 27, 2017 2:08 am ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
A USS Ranger CV-61 With or without guns would be great, I am just waiting on Greg to do the USS Theodore Roosevelt sponsons so I can get back on my 1991 build. Happy Modeling John |
|
| Author: | gtbred [ Sun Mar 05, 2017 8:17 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
kidcurrie42 wrote: A USS Ranger CV-61 With or without guns would be great, I am just waiting on Greg to do the USS Theodore Roosevelt sponsons so I can get back on my 1991 build. Happy Modeling John I hope Gregg will still have time to do the America island. |
|
| Author: | gjholmes77 [ Sun Mar 05, 2017 10:04 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Yes, the America island is still in works. I'm pretty close to finishing the Reagan island and will use some of the lessons learned on America. |
|
| Author: | gtbred [ Sun Mar 05, 2017 11:47 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Ohh cool Gregg! I'll be looking forward for that.
|
|
| Author: | Mark McKinnis [ Sat Mar 11, 2017 8:33 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
gjholmes77 wrote: Yes, the America island is still in works. I'm pretty close to finishing the Reagan island and will use some of the lessons learned on America. Hi Greg, Are you doing the aft mast for Reagan to go with the island and main mast you are doing and have done? I am saving my pennies for your complete Reagan set one day. America will be welcomed as well. 1/350 and 700th scale for both! 
|
|
| Author: | Bangor lad [ Sun Mar 12, 2017 4:54 am ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
I've started Meng's 1\700 USS Lexington. This is a quick build, no-glue kit which has a surprisingly good level of detail. I'm not planning to add any extra detail but have some fun with the painting and weathering. Hope to post some photos shortly. Cheers |
|
| Author: | gjholmes77 [ Sun Mar 12, 2017 8:09 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Hi Mark, Ah yes I need, to finish that up. The aft mast is just about there. The rest of the island is still a ways off. Mark McKinnis wrote: gjholmes77 wrote: Yes, the America island is still in works. I'm pretty close to finishing the Reagan island and will use some of the lessons learned on America. Hi Greg, Are you doing the aft mast for Reagan to go with the island and main mast you are doing and have done? I am saving my pennies for your complete Reagan set one day. America will be welcomed as well. 1/350 and 700th scale for both! |
|
| Author: | Mark McKinnis [ Fri Mar 17, 2017 3:48 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Hi Greg, No hurry on Reagan for me. I have to finish a few projects and after I added up everything I need to get to build Reagan correctly, it was more pennies than I thought. It is a must build for me though. Keep up the good work! MM |
|
| Author: | gtbred [ Sun Mar 19, 2017 4:18 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Yeah, no hurry on the America island also. Lot of work to be done turning the hull from J.F.K into the America. |
|
| Author: | Bangor lad [ Sun Apr 09, 2017 4:43 am ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Some progress made on Meng's 1/700 USS Lexington. Painted with Lifecolor acrylics. Quite a way to go! Attachment: DSCF3207.JPG [ 130.5 KiB | Viewed 2777 times ] |
|
| Author: | kidcurrie42 [ Sun May 07, 2017 12:36 am ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
Looks like a nice clean build Dave  Happy Modeling John |
|
| Author: | gtbred [ Sun Jun 04, 2017 12:41 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
 Photo from Ray.
|
|
| Author: | gtbred [ Mon Jun 05, 2017 5:47 pm ] |
| Post subject: | Re: Carrier Builders Yard, whats on the Slipway |
kidcurrie42 wrote: Ok it is dusted off and washed down, 3D Printed Hangar Bay openings and Conflagration stations have arrived, Now waiting on the Hangar Fire doors..... I think the layout is more or less sorted, just need to double check my research, but so far so good....... Happy Modeling John Any updates on your build John! 
|
|
| Page 234 of 241 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|