The Ship Model Forum
http://www.shipmodels.info/mws_forum/

1/350 HMS King George V (1943)
http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=191026
Page 1 of 2

Author:  Ivan [ Wed May 01, 2019 2:45 pm ]
Post subject:  1/350 HMS King George V (1943)

Good day. I decided to show what I can do with this model thanks to your advice ... I ask you not to throw at me slippers and pillows right away .. I'm still learning :thinking: .. then I will ask questions here as they occur :worship_1:
.... and now, in order: .... the model of Tamiya, the Prince of Wales .... etching: Pontos and Eduard and a lot of different things are still mostly from the North Star...as well as sheet plastic and other useful materials
I want to make a model for the period of its location off the coast of Italy .... many anti-aircraft guns .. =) .... beautiful camouflage ...

Attachments:
2JUN3eNB0ko.jpg
2JUN3eNB0ko.jpg [ 163.3 KiB | Viewed 4758 times ]
2012-07-31 07-02-30.JPG
2012-07-31 07-02-30.JPG [ 192.31 KiB | Viewed 4758 times ]
2012-07-31 06-48-34.JPG
2012-07-31 06-48-34.JPG [ 182.09 KiB | Viewed 4757 times ]
2012-07-31 06-46-26.JPG
2012-07-31 06-46-26.JPG [ 159.1 KiB | Viewed 4745 times ]

Author:  Ivan [ Wed May 01, 2019 3:08 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

besides polishing the hull ... making various small things

Attachments:
DSC04478.JPG
DSC04478.JPG [ 116.48 KiB | Viewed 4749 times ]
DSC04460.JPG
DSC04460.JPG [ 189.42 KiB | Viewed 4749 times ]
DSC04455.JPG
DSC04455.JPG [ 131.08 KiB | Viewed 4749 times ]
2012-07-31 06-46-14.JPG
2012-07-31 06-46-14.JPG [ 141.96 KiB | Viewed 4743 times ]

Author:  EJFoeth [ Thu May 02, 2019 2:23 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

Nice; going to follow your build :thumbs_up_1:

Author:  steinerman [ Thu May 02, 2019 11:58 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

Yes, I'll be following it too. Nice start!

Author:  Willie [ Sat May 04, 2019 5:39 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Hi there Ivan and all,
Ivan wrote:
I ask you not to throw at me slippers and pillows right away .. I'm still learning

The Carley rafts are amazing. Man, if this is what you do while at learning, I cannot imagine what you will be able to do when you have already learnt... :cool_2:
I will be following this construction.
Best regards from this side,
Willie.

Author:  Ivan [ Thu May 09, 2019 3:27 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

EJFoeth wrote:
Nice; going to follow your build :thumbs_up_1:

:wave_1: Good day EJFoeth... you have not accidentally saved photos of the spotlights, especially 44 inch ones - I can’t understand how it is inside !! it is arranged and colored ... I remember that I saw them on your site, but now I can’t open that page. . = (... I will be very grateful .. :thanks:
P.S. ....I am completely unable to find anything on the Internet on these searchlights ... I am also interested in information (photos) on other models of searchlights that were put on King George :thinking:

Author:  Ivan [ Mon May 13, 2019 12:20 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Good evening .. So far I decided to take a break from plastic .. And to solder parts from Pontos , and started with cranes as they require a good rework. I tried to make it more or less similar to the prototype from the photographs. Now it’s about making the base of the cranes.

Attachments:
oBPVSd5pqjU.jpg
oBPVSd5pqjU.jpg [ 255.75 KiB | Viewed 4185 times ]
osoaMHBqw5g.jpg
osoaMHBqw5g.jpg [ 326.19 KiB | Viewed 4185 times ]

Author:  Aop Aur [ Mon May 13, 2019 8:39 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Nice work! Did you add the plating on the hull, or that came with the kit? I don't recall my PoW having those...
I love the scratch-building modifications you're doing as well! Those rafts and oerlikons are sublime! :thumbs_up_1:
Keep it coming!

Aop

Author:  Ivan [ Tue May 14, 2019 4:09 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

Aop Aur wrote:
Nice work! Did you add the plating on the hull, or that came with the kit? I don't recall my PoW having those...
I love the scratch-building modifications you're doing as well! Those rafts and oerlikons are sublime! :thumbs_up_1:
Keep it coming!

Aop

Good afternoon. Thank you very much for your assessments ... No, initially everything was perfectly smooth as a baby's bottom ... 0.2mm plastic was glued ... on top with being on top of each other and ground into zero, a couple of stripes were added below
    Under the anchors, it was then leveled over with the help of an airbrush primer and masks made of adhesive tape...some of the old photos about the beginning of this building ..

Attachments:
1.jpg
1.jpg [ 174.66 KiB | Viewed 4094 times ]
2.jpg
2.jpg [ 173.93 KiB | Viewed 4094 times ]

Author:  J. Soca [ Wed May 15, 2019 6:57 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Sweet looking hull plating :thumbs_up_1: :thumbs_up_1:




Jose :wave_1:

Author:  pascalemod [ Thu May 16, 2019 7:35 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

The hull plating and adding scuttles is what keeps me from diving into the DoY build currently. You did a good job.

Author:  Ivan [ Mon May 27, 2019 12:42 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Good day., The moment when a 1 cm detail in a cube can take two weeks .. so, they stand in the most prominent place I had to make them myself from improvised materials. The detail from Tamia is simply terrible, and from Pontos it is very small.

Attachments:
2012-08-26 04-58-58.JPG
2012-08-26 04-58-58.JPG [ 275.52 KiB | Viewed 3671 times ]
2012-08-26 05-00-50.JPG
2012-08-26 05-00-50.JPG [ 323.87 KiB | Viewed 3671 times ]
2012-08-26 05-02-00.JPG
2012-08-26 05-02-00.JPG [ 191 KiB | Viewed 3671 times ]

Author:  Ivan [ Sat Sep 14, 2019 1:49 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

:wave_1: gentlemen good evening ... I decided to update the construction site a bit. so that you would not think that I was too lazy to do it or abandoned work on King George
I just got sick. :cry_3: and the speed in work fell significantly. In addition, I switched to manufacturing various small things to decorate the model, but they take an awful lot of time. And far from everything I understand how to do so that it is right :sorry:

Attachments:
yAM5Qj3xRJQ.jpg
yAM5Qj3xRJQ.jpg [ 124.71 KiB | Viewed 3363 times ]
hLa2aykIMNE.jpg
hLa2aykIMNE.jpg [ 115.25 KiB | Viewed 3363 times ]
Pbh0k3i8yC0.jpg
Pbh0k3i8yC0.jpg [ 130.17 KiB | Viewed 3363 times ]
QP6xcKZiT0o.jpg
QP6xcKZiT0o.jpg [ 125.6 KiB | Viewed 3363 times ]

Author:  Jabberwock [ Sat Sep 14, 2019 3:48 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Excellent work so far, very neat and tidy.

Cheers, Jabb

Author:  pascalemod [ Tue Sep 17, 2019 7:55 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

Doing good job there Ivan, well done. Seems to be getting better and better.

Author:  Ivan [ Wed Sep 18, 2019 3:43 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Good afternoon. After reviewing the work done, it was decided to redo the Pom-Pom features of the trunks from the Pontos company which were made just awful, also add some little things. Also it was necessary to make a 4-barrel machine that stands on the aft tower ... Sets of trunks were purchased from Master Models and 4-barrel Pom-pom from NordStar.
    for the upper machines, they had to invent coffin boxes ... which stood on two machines at King George.

Attachments:
dmJ_9rwJsIg.jpg
dmJ_9rwJsIg.jpg [ 310.44 KiB | Viewed 3138 times ]
32Z6UJd-Zkw.jpg
32Z6UJd-Zkw.jpg [ 369.87 KiB | Viewed 3138 times ]
ooCQ92R5BoU.jpg
ooCQ92R5BoU.jpg [ 340.47 KiB | Viewed 3138 times ]
QmdZqzloyI0.jpg
QmdZqzloyI0.jpg [ 349.74 KiB | Viewed 3138 times ]

Author:  R32WA [ Wed Sep 18, 2019 6:56 pm ]
Post subject:  Re: 1/350 HMS King George V (1943)

Outstanding work. Such great detail. Keep it up!

Author:  MartinJQuinn [ Thu Sep 19, 2019 8:46 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

Really great stuff, Ivan. Look forward to more. This is going to be a show stopper.

Author:  steinerman [ Thu Sep 19, 2019 10:50 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

I am impressed!! I like to think I'm into detail, but there is no way on earth I could come close to this kind of perfection!

Fantastic work!!! :thumbs_up_1: :thumbs_up_1:

Author:  Ivan [ Wed Nov 25, 2020 11:17 am ]
Post subject:  Re: 1/350 HMS King George V (1943)

Good afternoon.it's been more than a year since I started painting the hull, which almost ended in a complete disaster.I used AKAN paints in the first attempt when working with a liquid mask, the edges of the spots turned out to be completely uneven and torn,at the second attempt, the paint began to be removed together with Tamiya tape., because of this failure, the model was sent to the closet :mad_1:
Now having plucked up the courage to take a solvent, a rag ,sandpaper, I decided to restore it .Also, after reviewing the new developments on the coloring of respected colleagues from "Sovereign Hobbies", I Decided: first of all, they will move by the date on which the model was made..sacrifice part of the anti-aircraft guns in favor of the MC4. Second)use Vallejo paint on the tables for mixing and then fitting.
Losses of course were at all these washings..but it's good that I didn't paint the add-on ))).what happened I put on your court :deadhorse:

Attachments:
DSC04634.JPG
DSC04634.JPG [ 378.55 KiB | Viewed 2088 times ]
DSC04642.JPG
DSC04642.JPG [ 373.58 KiB | Viewed 2088 times ]
DSC04633.JPG
DSC04633.JPG [ 377.55 KiB | Viewed 2088 times ]
DSC04636.JPG
DSC04636.JPG [ 379.41 KiB | Viewed 2088 times ]
DSC04638.JPG
DSC04638.JPG [ 374.28 KiB | Viewed 2088 times ]

Page 1 of 2 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/