The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=379593 |
Page 1 of 5 |
Author: | jmarc [ Sat Sep 09, 2023 4:07 am ] |
Post subject: | TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
HI ! I been working for a while on this project and tough that I could share my WIP with you , do not hesitate if you have any question , So far I'm almost true with the basic work on the coning tower ,If you like to view the work I ave done so far , I have set-up and GOOGLE page for the project , here the direct link: https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 Hope youl'le enjoy the build Jmarc |
Author: | mick [ Sat Sep 09, 2023 7:42 am ] |
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
![]() |
Author: | jmarc [ Sat Sep 09, 2023 7:56 am ] |
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
mick wrote: :thumbs_up_1: great work Thank youuuuuuuu ! |
Author: | jmarc [ Mon Sep 11, 2023 5:47 am ] | ||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (SEPT 11th)...Today ,I glued the tube in the coning tower and painted the damage crack on the clear wall ! ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Sun Sep 24, 2023 2:41 am ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (SEPT 18th)...Today ,I continue to work on the last detail of the coning tower ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Mon Sep 25, 2023 4:40 pm ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (SEPT 25th)...Today ,I continue to work on the last detail of the coning tower ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Mon Oct 02, 2023 3:16 pm ] | |||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | |||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (OCT 02nd)...Today ,I painted and glued into place the pipe done last week ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Wed Oct 11, 2023 1:25 pm ] | |||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | |||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (OCT 10th)...Today ,I painted the clear side of the tower just need to clean it up ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Mon Oct 16, 2023 2:50 pm ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (OCT 16th)...Today ,I clean the clear section and gave it a coat of future , I also continue the seat that will be display around the gun fence and finally cut from there sprue the gun parts ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Tue Oct 24, 2023 6:08 am ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (OCT 23th)...Today ,I fill up the gap under the tower and continue scratch the wooden seat for the gun fence ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | SG1 [ Tue Oct 24, 2023 11:30 am ] |
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
Jmarc, That's an incredible amount of details: I dig the work you've done so far, will continue to follow with interest as i have an ongoing parallel project (on standby at the moment) focusing on U 48 in a muuuuch smaller scale ![]() |
Author: | mick [ Tue Oct 24, 2023 12:23 pm ] |
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
good progress ![]() |
Author: | jmarc [ Thu Nov 02, 2023 4:35 pm ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (OCT 30th)...Today ,I sanded the gap under the tower and painted it , glued the seat wooden board and done the railing wire holder and painted it ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Mon Nov 20, 2023 5:41 pm ] |
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
(NOV 20th)...Today ,I completed the side pipes and glued them into place , also done few more pipes to be place later on in the conning tower finally started the machine gun mount ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc |
Author: | jmarc [ Mon Nov 27, 2023 2:42 pm ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (NOV 27th)...Today ,I glued the extra pipes in the conning tower and also started the FA-330 plate form ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Mon Dec 11, 2023 3:14 pm ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
(DEC 11th)...Today ,I done the last detail on the pipes , completed the basic work on the FA-330 plate form and gave it a coat of gray finally start to add the holding post for it ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Mon Dec 18, 2023 5:14 pm ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (DEC 18th)...Today ,I glued the plate form on the railing and continue the modification of the machinegun base post ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | jmarc [ Tue Jan 09, 2024 7:23 am ] | ||||
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE | ||||
Thank you for following the 'WIP' on this project ,it's quite appreciated ! (JAN 08th)...Today ,I painted the /dry-brush the previously work done on the tower ! If you like to see the complete WIP on this project , just follow this Google link : https://photos.app.goo.gl/Yor8v3Q9pGkybXLh6 If you are curious and like to view the other WWII GERMAN sub I have done in 1/48 , just follow this link : https://goo.gl/photos/PM4EWugGVMb8Fzgm9 Enjoy ! jmarc
|
Author: | SG1 [ Wed Jan 10, 2024 3:12 am ] |
Post subject: | Re: TRUMPETER 1/48 GERMAN TYPE VII SUBMARINE |
Excellent superdetailing of the tower Jmarc. I love the gyro pad, top notch work. Question: were type VIIs ever equipped with FA330s? As far as i know only type IX were for a matter of space and type of combat patrols. Anyway, there's a very nice research thread about the platform here: https://models.rokket.biz/index.php?top ... 0#msg23450 that could interest you. keep this up! Cheers, SG PS the superdetailing of the conning tower interiors seen on your blog left me speechless. ![]() |
Page 1 of 5 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |