The Ship Model Forum
http://www.shipmodels.info/mws_forum/

Quickbuild Graf Spee (Trumpeter 1/700)
http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=72493
Page 1 of 3

Author:  DAVID BILEK [ Sat Mar 05, 2011 7:46 am ]
Post subject:  Quickbuild Graf Spee (Trumpeter 1/700)

I will try to do real quickbuild on this ship - no fear, no care, no special effort. Just add some details and finish Graf Spee ASAP - this is the task!

0,25mm evergreen strip will help with deck fit
Attachment:
Spee1.jpg
Spee1.jpg [ 67.16 KiB | Viewed 9546 times ]


150mm guns need to be slightly repositioned (about 0,5mm)
Attachment:
Spee2.jpg
Spee2.jpg [ 53.41 KiB | Viewed 9546 times ]


280mm gun turrets with Master (Poland) brass barrels
Attachment:
Spee3.jpg
Spee3.jpg [ 52.17 KiB | Viewed 9546 times ]


initial assembly of Turmmast with WEM searchlight platform
Attachment:
Spee4.jpg
Spee4.jpg [ 56.11 KiB | Viewed 9546 times ]

Author:  Quincy [ Sat Mar 05, 2011 12:18 pm ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Nice progress David. :thumbs_up_1: :thumbs_up_1: You'll do her justice! :cool_2:




Bob Pink. :wave_1:

Author:  DAVID BILEK [ Sun Mar 06, 2011 10:42 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Some progress.... :wave_1:

decks airbrushed by basic "wood" color...

Attachment:
Spee7.jpg
Spee7.jpg [ 58.31 KiB | Viewed 9465 times ]


... and preparation for chains

Attachment:
Spee8.jpg
Spee8.jpg [ 67.61 KiB | Viewed 9465 times ]


and painted 280mm turrets

Attachment:
Spee9.jpg
Spee9.jpg [ 67.3 KiB | Viewed 9465 times ]

Author:  DAVID BILEK [ Sat Mar 12, 2011 4:01 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Progress on the deck painting + more work on superstructures.

Four Vallejo shades applied by brush first:
Attachment:
Spee10.jpg
Spee10.jpg [ 80.25 KiB | Viewed 9350 times ]


And then wash by raw umber oil paint:
Attachment:
Spee11.jpg
Spee11.jpg [ 70.75 KiB | Viewed 9350 times ]


Attachment:
Spee12.jpg
Spee12.jpg [ 85.48 KiB | Viewed 9350 times ]


Attachment:
Spee13.jpg
Spee13.jpg [ 74.06 KiB | Viewed 9350 times ]

Author:  aleccap [ Sat Mar 12, 2011 7:51 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Looks great, what size is the chain ? (links per inch) will you be using the PE mast ?

Author:  Guest [ Sun Mar 13, 2011 8:37 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

David,

You're one of my favorite modelers.... I always enjoy your work. This is a really nice tutorial so far. When you go to paint the superstructure, I'd really like to see some pictures of how you do that given that you've already painted the decks.

Chris

Author:  DAVID BILEK [ Sun Mar 13, 2011 12:03 pm ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

... and now painting - I am using several different approaches, but for Graf Spee I used method "railings first and then painting". So I glued railings (Flyhawk this time) everywhere and then I masked all decks by small squares and oblongs from Tamiya masking tape. It is boring work, but you cannot do mistake. And then I airbrushed light gray for superstructures and dark gray for hull.

Attachment:
Spee15.jpg
Spee15.jpg [ 69.1 KiB | Viewed 9260 times ]


And here is result:

Attachment:
Spee16.jpg
Spee16.jpg [ 61.11 KiB | Viewed 9260 times ]


Attachment:
Spee17.jpg
Spee17.jpg [ 58.55 KiB | Viewed 9260 times ]

Author:  DAVID BILEK [ Sun Mar 13, 2011 12:09 pm ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

I forgot to answer to aleccap:
Chain - I do not know, how many links per inch, I am not familiar with feet and inches :cool_2: . But I know size of one link - 0,9x1,2mm and thickness is 0,2mm.
Masts - all masts will be from brass rods. Plus I add some PE parts, of course.

Author:  DAVID BILEK [ Wed Mar 16, 2011 4:04 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

More progress... it looks I will be able to really finish her :cool_1:

150mm assembled and placed:

Attachment:
Spee19.jpg
Spee19.jpg [ 126 KiB | Viewed 9190 times ]


Turmmast with "Coronel" PE part from WEM:

Attachment:
Spee20.jpg
Spee20.jpg [ 63.41 KiB | Viewed 9190 times ]


And funnel with mainmast. The small "T" in front is my first successful welding...

Attachment:
Spee21.jpg
Spee21.jpg [ 67.36 KiB | Viewed 9190 times ]

Author:  Allan McBeath [ Wed Mar 16, 2011 4:09 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Great work. Regarding the chain again. Where did you buy it ? Remember the manufacturer?

Author:  Quincy [ Wed Mar 16, 2011 9:43 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

:thumbs_up_1: :thumbs_up_1:





Bob Pink. :wave_1:

Author:  DAVID BILEK [ Thu Mar 17, 2011 4:57 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

To Silent One - the chain is produced by Flagship and was bought in Hobby Link Japan - http://www.hlj.com/product/FLG40174 :wave_1:

Author:  Rui Matos [ Thu Mar 17, 2011 8:34 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Hi David

Long time no talk :)
Looks excellent, as usual - keep up the good work
Cheers
Rui

Author:  MartinJQuinn [ Thu Mar 17, 2011 1:21 pm ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Gorgeous work. At first I thought the photo of the forward superstructure was a CAD drawing.

Author:  DAVID BILEK [ Mon Mar 21, 2011 3:35 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Busy weekend for me :big_grin:

Progress on front superstructures:

Attachment:
Spee22.jpg
Spee22.jpg [ 118.44 KiB | Viewed 9004 times ]


Armament ready...

Attachment:
Spee23.jpg
Spee23.jpg [ 135.49 KiB | Viewed 9004 times ]


And some smaller things:

Attachment:
Spee24.jpg
Spee24.jpg [ 111.9 KiB | Viewed 9004 times ]


Cheers :wave_1:

Author:  MöLDERS [ Tue Mar 22, 2011 10:43 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Sweeeeeet! :big_grin:
Perfect photography, as usual!

Author:  angeleyes [ Tue Mar 22, 2011 5:06 pm ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Nice photography.A sector often overlooked by many regular posters on this and other modeling forums.
Excellent painting and subtle washes.

P.S I noticed you are using a cigarette in many of your shots ,the same way i am using a BIC lighter to give an idea of the model size.Are we passing out the wrong message to our audience :heh:

Author:  Devin [ Wed Mar 23, 2011 12:46 pm ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Very nice work. Spee is one of the few German ships I have an interest in building someday.

Author:  DAVID BILEK [ Thu Mar 24, 2011 5:18 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Thank you guys! Unfortunately Graf Spee and other projects consumes a lot of time, so I did not tell you, how I like Angeleyes weathering on Nelson hull, how I like waves on Rui's submarine or how I like Moelders work on 1/72 torpedoboot... Excuse me!

Today evening I will add more :wave_1:

Author:  DAVID BILEK [ Fri Mar 25, 2011 4:07 am ]
Post subject:  Re: Quickbuild Graf Spee (Trumpeter 1/700)

Promised progress on Graf Spee. I started to equip hull step by step. The funnel will be attchached after small boats in order to keep open space for easy placement of boats.

Attachment:
Spee25.jpg
Spee25.jpg [ 123.72 KiB | Viewed 8761 times ]


Attachment:
Spee27.jpg
Spee27.jpg [ 119.15 KiB | Viewed 8761 times ]


Attachment:
Spee28.jpg
Spee28.jpg [ 129.36 KiB | Viewed 8761 times ]


Attachment:
Spee26.jpg
Spee26.jpg [ 136.55 KiB | Viewed 8761 times ]

Page 1 of 3 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/