The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=75145 |
Page 1 of 22 |
Author: | LE BOSCO [ Mon Apr 18, 2011 2:57 am ] |
Post subject: | 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Hello gents I your propose the step by step mounting of the battleship Richelieu in the fifties (52) the model it is that of Trumpeter, with all the errors but I will try to remove these errors the first stage will be mounting the hull,as the model will be presented on a base , the model it is "full hull" the stern with the brackets and shafts the bollards and fairleads will be removed because they are ""ugly"" (see thumbnail) I'll redo them in resin,the master's there will be work on the model!!!! see you latter! Nicolas |
Author: | sirmaumau [ Mon Apr 18, 2011 9:28 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
I did took much effort to rebuild and replace these UGLY things! |
Author: | LE BOSCO [ Tue Apr 19, 2011 10:45 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Hi gents sirmaumau ,have you the photos or a link or may have seen your Richelieu? Continued Work. at the bottom of the hull ,gluing with of the Araldite ,of portions of square section,order imprisoned two nuts Gluing of the all decks and the first surprise Indeed, on the bow,the capstans of anchor chains, are reversed!!! just look at the plan Thus, deletion of any details and after sanding (a long session ) next steps, make the new details!!! regards Nicolas |
Author: | sirmaumau [ Wed Apr 20, 2011 8:07 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
viewtopic.php?f=60&t=49603 Trumpeter kit needs too many operations happy modeling! LE BOSCO |
Author: | Sylvain Auger [ Wed Apr 20, 2011 8:53 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
That's a very bold project Nicolas!!!! I have this model in the stash and because of all the mistakes I thought about building the model and adding PE but without paint. Like pictures of PE manufacturer. Cheers Sylvain |
Author: | LE BOSCO [ Fri Apr 22, 2011 8:41 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
HI sirmaumau Great model ,well done I think that I would make one day, this version (before 43) Sylvain thank you for your comment, as well as your participation has my thread I hope that you will go out your Richelieu of your stash,and that a mounting attractive, is born of the side of Canada regard Nicolas |
Author: | LE BOSCO [ Fri Apr 22, 2011 9:04 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Hello gents I redid the bases of cabestants,and the paths of sliding of chains A lid is instaled In front of one of the bases of cabestants the new hawse pipe,is realised in "eye wash" ("trompe l'oeil"in french) the all parts ,are prepared for the moulding see you latter ,for the next stage bye Nicolas |
Author: | EJFoeth [ Fri Apr 22, 2011 11:00 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Promising! (I know about a trompe d'oeil being an optical illusion, so I guess you mean you're not going to make a real hawse pipe?) |
Author: | LE BOSCO [ Fri Apr 22, 2011 11:44 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
EJFoeth wrote: Promising! (I know about a trompe d'oeil being an optical illusion, so I guess you mean you're not going to make a real hawse pipe?) thank you ! Effectively, I am not going to make of true hawse pipes , it are not going to pass trough the deck! i'll put more work on others more important parts regards Nicolas |
Author: | LE BOSCO [ Sun Apr 24, 2011 5:01 pm ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Hi gents The work continues by the corking and the creation of new's portholes,Indeed,Trumpeter they have made the mistake in the reading of the plans in their ownership !!!one more During the sanding of putty, the gutters above portholes can beings damaged ,or those who are above the new's portholes ,are redone, by using of the steel fine wire rolled up around a drill, and cut has half They are glued has the cyanoacrylate (do not tremble ) the result The exits of the hawse pipes are redone and the a part which carries the name in french of "faux brion" this part serves to attach the chains of the paravanes for the dredging!!! Even a battleship can make the work of a minesweeper ! see you later Nicolas |
Author: | LE BOSCO [ Thu Apr 28, 2011 2:05 pm ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
HI everybody On the hull,the note of assembly indicates that the walls of bathtubs of 20mm ,presenting a space between bathtubs walls and hull What is false!!The good position,It is like that Aligned with the wall of the hull On the bow,the bathtubs,are also settled temporarily The preparatory work on parts which are going to form the "castle" on the funnel,Trumpeter ," have forgot" an air vent!! the funnel ,with the hole,for the air vent new see you later Nicolas |
Author: | sirmaumau [ Thu Apr 28, 2011 6:51 pm ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
le bosco, actually neither heller nor trumpter did a correct chemney which is semi-cylinder at its base part.hope to a rebuild! good luck! |
Author: | LE BOSCO [ Fri Apr 29, 2011 6:36 pm ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Hi everybody Sirmaumau,I not think I going to redo everything on the chemney But here is his current progress bye Nicolas |
Author: | LE BOSCO [ Sat Apr 30, 2011 4:29 pm ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
HI The "main work" on the chemney are ended! the chemney with a coat of primer That begins has to look like has something ,no ? Nicolas |
Author: | LE BOSCO [ Sun May 08, 2011 11:08 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
hi everybody's Photos of the progress of the works on the castle, the photos are in the order of the assembly, from the bottom up the base the navigation Footbridge The footbridges of intermediary and majority under the majority footbridge ,four air vent ,make with a EP ,are installed (arrows) Six pipes are installed as a replacement the five molded by trumpeter http://i280.photobucket.com/albums/kk16 ... o/ri59.jpg under the platform of the watch,the openwork reinforcements, are made in plastic card the "blockhaus" with the news optics The whole temporarily mount see you latter best regards Nicolas |
Author: | Stefano Salesi [ Sun May 08, 2011 11:29 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
good work on your richelieu. i'm following your build with interest. cheers. |
Author: | LE BOSCO [ Sun May 22, 2011 4:59 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Hi folks The last headways on my "Rich" The castle and the chimney almost finished (The big works) And for first time, an overview which allows to perceive the beautiful silhouette of Richelieu (The most beautiful to the world ) Otherwise, on the stern it is necessary to take back the end of the deck and the capstan Indeed, the wooden deck do not go up to the end, but a steel part is present,I have eliminate the molded chain and I have redid the hawse pipes on the picture ,we see the base of the new capstan On the base of the "castle",it is necessary to create an staircase (C) and to take back the shape of the roof (B) and of instaler two reinforcements under the two overhangs presente of every side (A) the tubs for the 100mm ,need to be heightened of 2.5mm , as well as the rectangular boxes. four renforcements are present below these last one .An opening for a staircase is also breakthrough, in every tub the aspect that the set has to have The continuation coming soon best regards Nicolas |
Author: | Atma [ Thu May 26, 2011 9:18 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Excellent work, waiting for more pictures ! |
Author: | MartinJQuinn [ Thu May 26, 2011 9:36 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
Excellent work! |
Author: | LE BOSCO [ Sun May 29, 2011 4:16 am ] |
Post subject: | Re: 1/350 french battleship RICHELIEU/l'Arsenal Upgrade Set |
HI folks thank you for your feedback Atma and MartinJQuinn the continuation of my work I molded the first parts in resine The same presented temporarily, just to "see" He stays in me has to make capstans The work on the "tanks" of 40 mm I redid the bathtubs of rangefinders , as well as the reinforcements present under All the parts It is also necessary to me to make two new Masters of the bathtubs of rangefinders (a left and a right) The ready parts has beings molded On the right ,the news airvents see you latters Nicolas |
Page 1 of 22 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |