The Ship Model Forum
http://www.shipmodels.info/mws_forum/

CVL-22 Independence Dragon. Finished! (pfff)
http://www.shipmodels.info/mws_forum/viewtopic.php?f=60&t=158850		 Page 1 of 4
Author:  Sbouba [ Wed Feb 11, 2015 1:46 pm ]
Post subject:  CVL-22 Independence Dragon. Finished! (pfff)
Hi everybody. As I am waiting for the surface mail to bring the IJN"Shokaku" home, I am training myself with this beautiful carrier as to get accustomed once again with ship modeling (I am an aircraft guy basically!)
So here are some pics of my WIP. I usually paint and weather the model during the building process. It seems natural to me as when the deck is on with the island and funnel, things are much more difficult! The basic paint is Gunze Navy blue H54, White Ensign deck blue 20a, and oil paint to built filters and weathering. L'Arsenal is providing everything you need to improve the already very good plastic parts from Dragon, and the magic of uncle Jacques is evident in the close-up pics. I use the great Warship pictorial as a reference, a great help when compare to the poor Dragon instructions, and when I say poor! As on the pictures on the Warship pictorial, I did paint some spots with Ocean Grey, put some maskol using a small piece of sponge, then Navy Blue 5N. Maskol was then removed and here you are! So here is the first batch of pics, comments are warmly welcome! Cheers, jean. :wave_1: :wave_1:
Image
Image
Image
Image
Author:  hypno7 [ Wed Feb 11, 2015 2:46 pm ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Very nice, I will certainly follow. The weathering looks very good and convincing. :wave_1:
Author:  ModelMonkey [ Wed Feb 11, 2015 3:51 pm ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Brilliant!
Author:  LE BOSCO [ Thu Feb 12, 2015 1:04 pm ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
just as hypno, the weathering looks very good and very convincing :thumbs_up_1: well done
cheers
nicolas
Author:  Sbouba [ Fri Feb 13, 2015 2:48 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Thanks Gentlemen! Here are more pics of my WIP on the ship. All the SBDs will be in the hangar, ant it's true the non folding wings ate all the space! The floating nets baskets are also fixed as are the davits ,chocks are from l'Arsenal those of the kit are grossly undersized. I have started to work on the platforms around the deck, but nothing will be fixed until I put the Pontos deck which I am waiting from Luckymodel in Hong-Kong. Best regards, jean. Salut Nicolas! :wave_1: :wave_1:

Image
Image
Image
Image
Image
Author:  ModelMonkey [ Fri Feb 13, 2015 7:18 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Jean,

Beautiful and very realistic weathering. Superb!
Author:  Sbouba [ Fri Feb 13, 2015 11:33 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Thanks a lot Steve, but it's a long and tedious job. Working with oils is certainly the best way to achieve a realistic wear, but looking at the pics of the real thing helps to remain credible! Cheers! Jean. :wave_1: :wave_1:
Author:  JamesWLacy [ Fri Feb 13, 2015 10:22 pm ]
Post subject:  Re: CVL-22 Inddependence Dragon+ l'Arsenal special set, 1/35
my hat's off to anyone who attempts a Dragon kit. Microscopic parts and postage stamp instructions. If you will forgive picking a bit, but SODs never served on COLs the fixed wings took up too much room and they were being phased out of front ling service. My father was fighter director on USS Monterrey CVL 26 and he said they carried TBF/Ms and F6Fs. Anyway, good luck, you may inspire me to try one.
Author:  Sbouba [ Sat Feb 14, 2015 2:52 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Here are some more pics of the Isle and the four stacks. They will be weathered before being glued in place, but as I wrote before , only when the Pontos deck will be fixed, and I do not have it yet! Have a great WE, and remember that tomorrow will be the 70th anniversary of Bloody Iwo-Jima! Cheers.
Image
Image
Image
Author:  Sbouba [ Sat Feb 14, 2015 6:49 am ]
Post subject:  Re: CVL-22 Inddependence Dragon+ l'Arsenal special set, 1/35
JamesWLacy wrote:
my hat's off to anyone who attempts a Dragon kit. Microscopic parts and postage stamp instructions. If you will forgive picking a bit, but SODs never served on COLs the fixed wings took up too much room and they were being phased out of front ling service. My father was fighter director on USS Monterrey CVL 26 and he said they carried TBF/Ms and F6Fs. Anyway, good luck, you may inspire me to try one.


That is correct, but as I depict the CL in its early days in 43, the SBD are still on board. Anyway the deck will have TBM and F6F. Cheers :thumbs_up_1:
Author:  LE BOSCO [ Sat Feb 14, 2015 7:21 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Hi Sbouba

great job on your island and the other parts :thumbs_up_1: :thumbs_up_1: the PE come from the l'Arsenal ?
keep the way :smallsmile:
chhers
nicolas

I have to think to put this box in my stash!!!
Author:  hypno7 [ Sat Feb 14, 2015 7:37 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Hi Sbouba,

Very nice updates! I am really getting to like this class of ship. Just one thing (if you don't mind :wave_1: ), if you put the elevators down (area more visible), the area around the elevator was painted deck gray and a band of black on top of about 180 cm. For reference, see http://www.researcheratlarge.com/Ships/CVL/1943HangarWarmUp.html. (Thanks to Tracy White for the information)

Looking forward for more updates!
Author:  StevenVD [ Sun Feb 15, 2015 7:07 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Very nice planes! Myself I have the Princeton kit and a WEM set in my stash. I wondered if avPontos deck would be useful to me because of the pre-painted deck number, I consider to buy Artwox. I hope my planes will be as lively as yours.
Author:  MartinJQuinn [ Sun Feb 15, 2015 4:52 pm ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Very impressive work. Can't wait to see more.
Author:  Mgunns [ Tue Feb 17, 2015 10:47 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Your work on the bridge, stacks and platforms is noteworthy, very nicely done. You hangar work will add interest to the interior once you get the flight deck on. I have often thought of gitting this, but;.......I will be following your build.
Author:  Tracy White [ Wed Feb 18, 2015 2:07 pm ]
Post subject:  Re: CVL-22 Inddependence Dragon+ l'Arsenal special set, 1/35
JamesWLacy wrote:
If you will forgive picking a bit, but SODs never served on COLs the fixed wings took up too much room and they were being phased out of front ling service.


If by "served" you strictly mean during combat, then you are correct. Otherwise, CVL-22 carried SBD-4s and -5s until the end of July, 1943. She was already in the Pacific at this point and had operated with SBDs for over three months. So, it can be correct to have SBDs in use on the model with either the 5" or quad 40mm guns.
Author:  Sbouba [ Wed Feb 18, 2015 2:41 pm ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Many thanks Tracy! In the hangar they will not tickle history! Best regards from France. :cool_1:
Author:  Sbouba [ Thu Feb 19, 2015 4:43 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Hello Gents!
Work is progressing on my project and now the hull is fixed on the wooden base where the sea has been simulated using Pierre Marchal technic. I drilled holes along both side of the hull, using pics as references to make the pomp exits, and I am looking for a convincing way to simulate those water jets. I can now work more safely around the hull as I do not have to touch the model anymore, thus limiting the risks of breaking something. The deck is fitting without too much trouble and now I wait for the postman and the Pontos deck, I know it's on the way! Cheers to you all, Jean.

Image
Image
Image
Image
Author:  ModelMonkey [ Thu Feb 19, 2015 11:40 am ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
Love it.
Author:  Sbouba [ Fri Feb 20, 2015 3:13 pm ]
Post subject:  Re: CVL-22 Independence Dragon+ l'Arsenal special set, 1/350
I am glad you do! I keep on adding details along the hull to make this latter as complete as possible before working along with the soon to arrive deck. Some details were also added to the funnel in the form of antennas with their own platforms. Pics soon to follow, best regards, Jean. :wave_1: :wave_1:
Page 1 of 4 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/