The Ship Model Forum

The Ship Modelers Source
It is currently Fri Apr 19, 2024 10:36 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sun Aug 07, 2016 1:18 pm 
Offline

Joined: Thu Feb 23, 2012 11:16 am
Posts: 66
Im currently building the A86 torpedoboot from Mirage Hobby on 1/350 and wanted to know if there is possibility to add some weathering on the "black" coat... For the moment, i used Vallejo primer and Revell mat black.Image

_________________
if you need translation from French instructions...


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 08, 2016 10:34 am 
Offline

Joined: Thu May 30, 2013 1:50 pm
Posts: 1980
Firstly, IMHO, I think a base coat of black is too dark. Paint first with dark gray, spray with Future, then add a black oil wash. When dry, use a dry brush to remove excess oil pigment. Brush away pigment until you arrive at the effect you like, but leave pigment in corners, crevises, and scribed lines. Seal the paint with clear flat then drybrush lightly with lighter gray for highlighting. After a couple of tries you will have a weathered look with detail that pops. This technique is for the entire ship. :wave_1:


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 08, 2016 10:58 am 
Offline

Joined: Thu Feb 23, 2012 11:16 am
Posts: 66
Hello Biggles, thanks for your reply :thumbs_up_1: ... Last question, can i repaint all of the process on the current bad black i did ? :huh:

_________________
if you need translation from French instructions...


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 08, 2016 6:21 pm 
Offline

Joined: Thu May 30, 2013 1:50 pm
Posts: 1980
I think it's possible. Mask off the lower hull and airbrush. If you miss some corners, that's OK as they will be in shadow anyway. :wave_1:


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 30, 2016 8:12 am 
Offline
User avatar

Joined: Wed Sep 28, 2011 12:04 pm
Posts: 1820
Location: Paris
Although lamp-black (soot) was used as the pigment in the black oil-paint of the day, this paint would have weathered quite quickly to become matt and then it would have looked more like anthracite grey. So, starting from a dark grey, as suggested above, would be the right strategy.

_________________
Eberhard

Former chairman Arbeitskreis historischer Schiffbau e.V. (German Association for Shipbuilding History)

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Image Image Image Image


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 30, 2016 8:44 am 
Offline
User avatar

Joined: Tue Jan 11, 2005 1:40 pm
Posts: 8175
Location: New Jersey
On the other hand, instead of repainting, you could use lighter colors to weather her and make the black look streaked and dirty.

_________________
Martin

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne

Ship Model Gallery


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 19 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group