The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
Cold War Era Group Build Apr.15-Oct.15, 2011 http://www.shipmodels.info/mws_forum/viewtopic.php?f=74&t=73049 |
Page 6 of 9 |
Author: | Bob Cicconi [ Sun May 22, 2011 2:19 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Well...I'm done! Here are 3 photos of the completed Exeter. I'm sending the whole batch of photos to the main website for posting. Now I have to start the Shinano Maru as soon as it lands for the civilian ship group build. |
Author: | Quincy [ Sun May 22, 2011 2:29 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
She looks very "Cicconi" like Bobby! Another one of your masterpieces! Bob Pink. |
Author: | Bob Cicconi [ Mon May 23, 2011 6:24 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Thanks Bob! Are you going to the Nats? Maybe I'll see you out there! |
Author: | kidcurrie42 [ Mon May 23, 2011 6:57 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Bob, you certainly did my old ship proud, i spent over 5 years onboard Exeter Happy Modeling John |
Author: | navydavesof [ Mon May 23, 2011 7:03 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Bob, Awefully well done! |
Author: | Quincy [ Mon May 23, 2011 8:45 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Bob Cicconi wrote: Thanks Bob! Are you going to the Nats? Maybe I'll see you out there! Yes I am. I'm looking forward meeting all of you guys! Just gotta survive this wacky weather first, Bob Pink. |
Author: | MartinJQuinn [ Mon May 23, 2011 9:01 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Quincy wrote: She looks very "Cicconi" like Bobby! Another one of your masterpieces! Bob Pink. I saw her in person on Saturday - a great little build! |
Author: | taskforce48 [ Tue May 24, 2011 9:57 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Great work so far everyone! I see that Bobby C. has taken first for completion, and what a phenomenal looking little build. Hard to believe that it is 1/700. Keep up the great work! Matt |
Author: | taskforce48 [ Wed Jun 29, 2011 12:48 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Looking good there GT! Matt |
Author: | Bill Liebold [ Thu Jun 30, 2011 8:48 am ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
navydavesof, Wow, that's a lot of work. Don't hope that your bulkhead/hull extention blends in when you paint it! Make sure it does. Tamiya makes a pretty good primer and I know you can get it where you are. Give the model a shot. Any flaws will jump right out. Then you can resand or add a little filler if need be. Congrat's on the mile stone at work! Bill |
Author: | navydavesof [ Thu Jun 30, 2011 9:47 am ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Bill Liebold wrote: navydavesof, Wow, that's a lot of work. Don't hope that your bulkhead/hull extention blends in when you paint it! Make sure it does. Tamiya makes a pretty good primer and I know you can get it where you are. Give the model a shot. Any flaws will jump right out. Then you can resand or add a little filler if need be. Congrat's on the mile stone at work! Bill Ah! An excellent idea. Some quick primer will do the job! Thanks for that. Also, thanks for the congrats. It's a big relief |
Author: | carr [ Thu Jun 30, 2011 11:20 am ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
navydavesof wrote: I have finished the hard parts of the helicopter hanger and completely replacing and rebuilding the VLS arrangement on the ship. Love the look! Just curious, would the backblast/exhaust of the RAMs cause problems when fired on an aft bearing, in particular being directed into the stack for the upper one or right against the vertical structure for the lower one? Quote: Well, that's all recently. Today I achieved a pretty big goal at work so now I can spend a little more time on these kinds of projects now! If it's what I think it is, congratulations! That's got to be a load off your mind! Regards, Bob |
Author: | navydavesof [ Thu Jun 30, 2011 4:53 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
carr wrote: If it's what I think it is, congratulations! That's got to be a load off your mind! Yes, sir, PM to follow!Concerning the RAM positioning, I initially wondered that, too when I first saw the design. It does seem like the exhaust would be pretty abusive. However, there are ways to mitigate that such as a slightly thicker bulkhead for the exhaust to impact against on the lower launcher. I don't know about the exhaust being fired directly onto the stack caps with the upper launcher, though. I bet it would make a terrible racket, like blowing a whistle into a drum. However, I don't think it would cause a structural problem to the stack caps or a back-pressure issue blowing down the uptakes. The uptakes are too big in circumference and too long to be filled up with the exhaust from RAM missiles being fired just right. However, what I am very curious about is: How did they plan to load and unload the RAM launchers all the hell the way up there? Usually you use a cart that sits on the deck and elevates the missile to the slot/cell you want, and then you crank the missile in. I did think, however, what they could do during an ammo on-load is just remove the RAM box with the crane they're using to arm the ship and replace it with a full one, just like fitting Harpoons. hmmmm.... I might have to depict the launchers with little lifting lugs. |
Author: | Mark McKinnis [ Sun Jul 03, 2011 11:26 am ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Nice work so far evetybody! I had just completed the Hancock in her SCB-27C on Friday. Saturday we had my son's B-Day Party and invited a few of his friends from daycare and the neighbors kids. They had a great time. In fact, one of them thought that it would be great to take the glue off of my bench and dribble it down the flight deck of Hancock! My wife was surprised that I took it so calmly. I guess it was my fault for leaving it within reach of the kids. We have a pretty small house so the bench is in the dining room and easily accessible. My son has grown up with the models so he knows not to mess with them. Not so much the other kids. Oooooof! I have removed the island and stripped the deck. Pics to follow upon the second commissioning. I hope everyone has a nice holiday here in the States. Mark |
Author: | kidcurrie42 [ Sun Jul 03, 2011 12:48 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Ouchessssssssssssssssssss So no parties next year or no glue and carriers in the vicinity. Looking forwards to seeing the 2nd commissioning. Happy Modeling John |
Author: | navydavesof [ Mon Jul 04, 2011 10:09 am ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Here's a quick update Cold War builders! RAST!!! Attachment: More RAST! Attachment: Full length view: Attachment: Until next time, fo' shizzle!!! |
Author: | Gordon Bjorklund [ Wed Jul 06, 2011 10:02 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
Bob C, Great job on your Exeter. It truely is a great looking model. |
Author: | Gordon Bjorklund [ Wed Jul 06, 2011 10:29 pm ] |
Post subject: | Re: Cold War Era Group Build Apr.15-Oct.15, 2011 |
The Long Beach is on again. I hate to waste money so I'm going to finish this (1/700) build if it blinds me from looking at all of these little pieces. I've got the large parts primed and nearly all of the little pieces are ready to be primed. Attachment: Attachment:
File comment: The small 5" gun and antenna. The pe ring that keeps the antenna from spreading out to far is to big so I used one of the rings from a 1/700 SK-2 radar which is smaller in diameter than the kits ring. The antenna looks to be a litlle large to me and was a pain for me to construct. Long Beach 006.jpg [ 47.96 KiB | Viewed 1267 times ] Attachment:
|
Page 6 of 9 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |