The Ship Model Forum

Hi Bill Just love it . Clean , crisp and superbly made , what more can I say.
Dave Wooley

You're the master Bill!!

Your builds are one of my scrtachbuilt inspirations!


Nick

_________________
Nichol Caballero
Civil Engineer and Ship Enthusiast

hi bill,santee is looking good,very nice styrene work,and i like the crisp edges on your camoflage paint job what is the status of indiana,i was following it very close because at the time i was building massachusetts.

Hello Russ Well, the Indiana is still in drydock, awaiting her superstructure. Frankly, it's on the back burner for now. All my attention is focused on this carrier project. Once Santee is completed and delivered, I will regroup my thoughts and get back on the Indiana. It will be about 2 months..maybe 3 We will see. Thanks for the post!......

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

This gets better and better everytime Bill those casted white metal details look simply marvelous



Jose

OK....The moment of truth! As you know, Santee will be a waterline model. This will be my first serious attempt at that. After looking at many photos and talking with lots of folks, I think I have come up with something pretty believable. I am still playing with this. The water has not yet been clear coated and the boundary layer needs to be caulked in. I left myself enough room in the water base so as not to struggle to get the hull in to it. Don't wan't it too tight. At any rate, here is what I've got so far. You be the judge. Comments are welcome.
Well, there it is......Let me know what you think. I'm still tweaking things!! Stay tuned.........

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

I really like the colour you chose for the water. The foam appear at all the right places, too!

I might suggest a bit more body to the stern wake, perhaps in the form of a few strands of cotton like at the bow.

_________________
De quoi s'agit-il?

Hi Bill Alas I have no experience of sea scapes what so ever. So I can not offer any practical comment in that department . However living where I live I see ships every day of the week and the water reaction to the hull on your model, to me looks right. The image of the water in your photos looks slate grey which is the sort of shade of water we see most of the time. Great job and a different perspective on larger scale models. Question and one that I'm considering myself . The material for the case, will it be perspex or acrylic . I ask this because it has been mentioned to me befor that if perspex is marked the offending mark can be easily removed but not so easy on acyrilic?
Dave Wooley

Hello again Dave. The "glass" case will be plexiglass. Here in Florida, they want over $900.00 to fabricate it for me. That's rediculous. I can buy the material for about $200.00, plus the adhesive and do it myself. Never built one altough if it is cut right it's just a matter of assembling it. It's just a box, basically.......Thanks for the post.

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

Hello Timmy....Thanks for the reply. I agree more action at the stern. As I said, I'm still tweaking this. After I clear coat the water, then i'll concentrate on more foamy stuff. You can overdo it real easy.

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

Bill...

Colouring is great, love the water at the side--but I think you need a bit less white water AHEAD of the cutwater, most ships push a bit--but carriers usually have a sharp forefoot...

looks like its just a matter of a bit of paint to - new word-- 'subtlerize' the effect!



JIM B

_________________
....I buy them at three times the speed I build 'em.... will I live long enough to empty my stash...?
http://www.modelshipgallery.com/gallery ... index.html

IPMS UK SIG (special interest group) www.finewaterline.com

Looks quite nice actually. I've some background in hydrodynamics, so for a future project I'd suggest more wave elevation along the hull. The wave elevation along the hull is now a bit flat. This can be correct for a well-designed hull but not for such an old one. Of course, this does depend greatly on the speed but the wash in the wake suggests high power. Looking at the hull form and not knowing anything about the rest of the hull shape, it looks like the fore shoulders of the ship are quite pronounced so I'd expect a wave trough there. The smaller waves diverging from the hull usually diverge at a higher angle.

Still, the general appearance of the water looks most convincing. I haven;t done anything on modeled water surfaces so far and hope to do as well.

Bill,

You might try Grandpa's Cabinets for a case. He's supposed to be pretty reasonable.

_________________
Any ship larger than a Destroyer is a waste of metal.

Hello again I have now clearcoated the "water" and have added some froth at the boundary layer, and a bit of weathering. I appreciate all the input on this from all of you. Just trying to get it believable.......Check it out.....
Well, I think I'm getting closer..........Stay tuned....

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

Hi Bill Looks the part
Dave Wooley

well, I guess "reasonably well" or even "fabulous" would be an understatement! Really stunning job on that water. I do think the froth on the sides could be increased, depending on the illustrated speed of the ship of course. I don't have any pictures of this particular ship, but from what I see when we are making about 14kts, that froth covers 1.5m or 2m from the hull. Anyway, pictures of the ship at speed, as you definately have, will give a good impression of the size (I don't even doubt the result will be spot on)

_________________
The merchant shipyard

Bill
Had to do some catching up ultra cool my friend. Very nice
Rod

Hello again all! Hope everyone had a good 4th of July! I have now permanantly mounted the ship to the "water" base, and I have installed the flightdeck/gallery deck and the island/radar tower assembly. A few more details need to be added, but things are coming along well. Photos I am posting are of the stb. side, port side not yet completed. In this first series of shots, I'll walk you around the ship. Then on to some detail shots. Let's take a look...........
There's a walk-around of the stb. side. I'll be rite back,with some detail shots!! Stay tuned..........

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

OK! Here's some more shots! I tried to get rid of some of the "backround Noise" by using sheets. I don't have a photo studio here and I'm somewhat limited for space. My photography skills are not that great either. Anyway, check these out.........
Well, that's it for now. On to the portside to continue as I have done here on the stb. side. Lot's to do yet. I have about 30 days.......Wish me luck......Stay tuned, more to come!!

_________________
Waldorf Productions / Museum Quality Model Warships
Custom Building Services Available

Hi Bill Stunning detail work on the workways and around the 3/38. I very much like your subtle weathering application looks the part most convincingly and that deck of yours is pure magic.
Dave Wooley