The Ship Model Forum http://www.shipmodels.info/mws_forum/ |
|
1/350 HMS Barham (1941) http://www.shipmodels.info/mws_forum/viewtopic.php?f=75&t=18343 |
Page 13 of 14 |
Author: | EJFoeth [ Fri May 15, 2009 12:50 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Wonderful Keep the pictures coming! |
Author: | JIM BAUMANN [ Fri May 15, 2009 12:56 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
At last Dino! This will give me rge shove I need to get the HMS QE '43 built! Looking forward to seeing her carve her way thru the seas...!! details look very very good! JIM B |
Author: | J. Soca [ Sat May 16, 2009 6:59 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Better late than never Dino Jose |
Author: | Dino Carancini [ Sun May 24, 2009 1:59 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Thank you for the warm welcome! The mushrooms war is over time to move to more amusing works Water: Anchors, ( forget Foeth's anchors and chains for his superb Hood as said before I will accept some compromise !! ) I scratchbuilt the third anchor, unfortunately in the WEM kit there were just two. If John will read here I hope he will wonder to include a third anchor in the future. Ciao! Dino |
Author: | JIM BAUMANN [ Sun May 24, 2009 3:54 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Deck detail looks modt impressive--it inspires me to make a start very soon on the ISW QE '43... Really looks the part! JIM B |
Author: | Dino Carancini [ Sun May 24, 2009 4:27 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Hi Jim! I have a YSW QE hull that I traded last year, an imperssive amount of resin . It should be easy tu scratchbuild the rest, since most of the superstructures are already casted in one block, including the hangars! I should modify my master for the 15" towers increasing the elevation and I could use the WEM PE set for the King George class to fit her.... we will see, now I must concentarte on the Barham without distractions! ciao Dino |
Author: | Miguel [ Sun May 24, 2009 3:06 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
My compliments Dino ,a outstanding work,veryyyyyy impressive and beautiful |
Author: | J. Soca [ Sun May 24, 2009 10:07 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
boy i'm i running out of adjectives now .. ship's overall look is beautiful Dino Jose |
Author: | Dave Wooley [ Mon May 25, 2009 5:23 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
iHi Dino An exceptionally fine piece of work you are an inspration .Thanks for posting Dave Wooley |
Author: | Dino Carancini [ Tue Jun 02, 2009 11:28 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Thank you Dave! Such words from a master scratchbuilder like you are really encouraging! Today, hit by a anger excess, I have tried to detach the wrong HACS! Very bad chosen, it seems that I used a sort of alien glue for them, not yet tested on earth, I was destroying all! I'm start thinking that I will live with them .... ...anyway... SHOW THE FLAG! Stern catwalk, I know that the handrail pattern isn't correct but it was made with the closest PE net in my hands... Main bridge small fittings. Cable reels and life buoy. |
Author: | Dino Carancini [ Sat Jul 04, 2009 4:47 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Hello! Eventually I'm going to see the finish of this model, the rigging is almost done, and the boats are ready to be paint. The admiral barge was scratchbuilt and casted in resin, the 30ft GIGs have been scratchbuilt too. |
Author: | Dave Wooley [ Sat Jul 04, 2009 7:13 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Simply stunning workmanship . Dave Wooley |
Author: | Quincy [ Sat Jul 04, 2009 10:01 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Absolutely stunning Dino! I am totally speechless. Bob Pink. |
Author: | J. Soca [ Sat Jul 04, 2009 11:54 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
She is beautiful Dino Jose |
Author: | Dino Carancini [ Sat Jul 04, 2009 2:27 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Thank you for the kind reply! This will be the last WIP update, next time he will be completed! Dino |
Author: | JIM BAUMANN [ Sat Jul 04, 2009 4:09 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
looks really convincing! Nice boats! JB |
Author: | Neptune [ Sat Jul 04, 2009 4:51 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Stunning work and at that scale! I'm curious to see overall shots of this one in the gallery (or on the board of course). What's your next project? |
Author: | Dino Carancini [ Sun Jul 05, 2009 1:19 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Neptune wrote: Stunning work and at that scale! I'm curious to see overall shots of this one in the gallery (or on the board of course). What's your next project? Hello, I've already glued some HMS Sheffield pieces! |
Author: | ottoirving [ Tue Jul 14, 2009 8:37 pm ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Hello. Dino, it is an amazing work . Hope someday i can reach a scratchbuilding like that . For the moment i will have to practice with the plastic model ships. Greetings |
Author: | Richard J OMalley [ Wed Jul 15, 2009 5:21 am ] |
Post subject: | Re: 1/350 HMS Barham (1941) |
Very nice work !Inspireng ! Richard |
Page 13 of 14 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |