The Ship Model Forum
http://www.shipmodels.info/mws_forum/

Scratchbuilding the USS Santee (CVE-29) in 1/96
http://www.shipmodels.info/mws_forum/viewtopic.php?f=75&t=35787
Page 10 of 11

Author:  JIM BAUMANN [ Sat Sep 26, 2009 3:00 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

A worthy and honourable outcome!

You are a Gentleman!

JIM B :wave_1: :thumbs_up_1:

Author:  Dave Wooley [ Sat Sep 26, 2009 3:12 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Bill I applaud what you have accomplished and the sentiment that motivated you to do this Keeping the memory alive is so important , especially now .
Dave Wooley :thumbs_up_1: :wave_1:

Author:  Bill Waldorf [ Sun Sep 27, 2009 12:40 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

USS Santee now up on Navsource..........
http://www.navsource.org:80/archives/03/cve-29/hrnm.htm

Author:  Dave Wooley [ Sun Sep 27, 2009 2:41 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Hi Bill Simply SUPERB :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :wave_1:
Dave Wooley

Author:  Bill Waldorf [ Wed Oct 07, 2009 4:29 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Just recieved this from the Hampton Roads Naval Museum. Thought I'd share it with you......................
Attachment:
letter santee.jpg
letter santee.jpg [ 92.18 KiB | Viewed 5760 times ]

Author:  JIM BAUMANN [ Wed Oct 07, 2009 5:00 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

:thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:


JIM B :thumbs_up_1: :wave_1:

Author:  Dave Wooley [ Wed Oct 07, 2009 5:02 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Bill my friend What an accolade, the letter says it all . :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :wave_1:
Dave Wooley

Author:  Cadman [ Wed Oct 07, 2009 5:47 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

That's awesome Bill! :thumbs_up_1:

Author:  Bill Waldorf [ Wed Oct 07, 2009 9:39 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Thanks to all! :smallsmile: I must admit, I really enjoyed building the waterline depiction of the model. I was hoping to pull it off, and I believe that I did. I am finding that one's self is your worst critic. Spending hours to make it right, or at least close to believable, then fretting if it really is right. These WW2 ships went through so many changes during thier useful life, it can be difficult to pin down anything.I am 56 years of age, refered to as one of the "senior modelers" on this site. God, thats sounds like I'm getting old! Been at this modeling thing for 46 years, in one form or another and I"ll tell you this, you never stop learning or stumbling across new things and new ways of doing those things. Thats part of the worthwhile thing. The other part is trying to leave sort of a living legacy of those brave souls, mostly 18 or a bit older during WW2, some who gave their lives for this country. I spose I am a bit patriotic, but I have met many of these men who used to be no more than kids. They are all in the twilight of their lives now, and we all lose many of them as time enoxorably moves on. They were called the "Greatest Generation". That is so true. Whats happened to us all? Where's that spirit this country used to have back then. I sure hope it's still there, somewhere. Am I rambling on...........must be the wine! I guess this pretty much ends this thread. Maybe Cadman will archive it! Thanks again for your comments. As always, greatly appreciated. I continue on................................Bill W. :cool_1:

Author:  Chris E. [ Sat Oct 10, 2009 3:04 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

I'm telling ya Bill, you are not to fret 'cause you NAILED IT, spot on!!! :thumbs_up_1: Bravo Zulu on the Santee old friend, she's one of the best I've seen. What a wonderful testimonial to her crew, to all who served and to those who made the ultimate sacrifice. I agree, these men and women truly are The Greatest Generation and it is a wonderful thing to be able to memorialize and pay tribute to them in this way. Frankly, I find it inspiring. (and slightly envious) :wink:

You "suppose" you're a BIT patriotic? I have news for you; In my book, you're a great American!

What's happened to us all? Too many people have forgotten. When one forgets, one takes things for granted. This is why it's up to people like you and me to carry on, carry the torch for those who can no longer, remind others and remember sacrifices made. Have faith, not all of us have forgotten or thown the past to the winds... You've proved that. That spirit is still there, I've seen it. We still carry on, we always will.

...I agree, this thread should be archived. There's simply too much good information here to just discard...

Author:  navydavesof [ Fri Oct 23, 2009 9:19 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Hello, all!

I live in the Virginia Beach area, and I am a docent at the USS Wisconsin. When I was going to volunteer a few weeks ago, I came across the Santee on my way out to the Wisconsin, and man what a pleasure. I had no idea Bill had done it. I looked at it and examined it, and man did I admire the detail involved. In the mean time, however, I found out that it was Bill's and it's a pleasure to be able to talk to the artist who constructed such a thing.

I must say the pictures do NOT do the real thing justice. I have always been a fan of the large scale models. They are the apex of model art, I think. It's something you have to walk down and across to see. There are some large scale models that seem to be rushed so they lack a lot of detail like down-pipes, markings, deck fittings, etc. Santee, on the other hand, looks really, really great. I can only imagine what a 1/96 version of the 1991 USS Wisconsin would look like. Talking about artwork.

If you ever get a chance to go by Nauticus in Norfolk, Virginia, you must go by and take a look at the Santee. You can't miss it.
:woo_hoo:

Author:  Bill Waldorf [ Sat Oct 24, 2009 8:21 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

navydavesof wrote:
Hello, all!

I live in the Virginia Beach area, and I am a docent at the USS Wisconsin. When I was going to volunteer a few weeks ago, I came across the Santee on my way out to the Wisconsin, and man what a pleasure. I had no idea Bill had done it. I looked at it and examined it, and man did I admire the detail involved. In the mean time, however, I found out that it was Bill's and it's a pleasure to be able to talk to the artist who constructed such a thing.

I must say the pictures do NOT do the real thing justice. I have always been a fan of the large scale models. They are the apex of model art, I think. It's something you have to walk down and across to see. There are some large scale models that seem to be rushed so they lack a lot of detail like down-pipes, markings, deck fittings, etc. Santee, on the other hand, looks really, really great. I can only imagine what a 1/96 version of the 1991 USS Wisconsin would look like. Talking about artwork.

If you ever get a chance to go by Nauticus in Norfolk, Virginia, you must go by and take a look at the Santee. You can't miss it.
:woo_hoo:


Thanks Much! Your comments are appreciated......................Bill W. :wave_1: :thumbs_up_1:

Author:  Dave Wooley [ Thu Dec 03, 2009 12:53 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Can't let Bill's Santee slip onto the second page I need the inspiration . :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :wave_1:
Dave Wooley

Author:  Bill Waldorf [ Thu Dec 03, 2009 5:37 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Dave Wooley wrote:
Can't let Bill's Santee slip onto the second page I need the inspiration . :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :wave_1:
Dave Wooley


Thanks Dave!!!! :wave_1: :thumbs_up_1: :thumbs_up_1:

Author:  desron48 [ Sat Dec 05, 2009 2:33 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Bill Waldorf wrote:
Just recieved this from the Hampton Roads Naval Museum. Thought I'd share it with you......................
Attachment:
letter santee.jpg
now that's what i call....the icing on the cake......excellent bill.........joe

Author:  gtb -red [ Sat Dec 05, 2009 1:36 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Congrats Bill, I just wish my 1/350 carrier hulls were as good as your big ones. :thumbs_up_1: :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Author:  scousegit [ Sun Dec 20, 2009 1:06 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Just come accross these two images of the ship, a before and after.

http://www.shipsnostalgia.com/gallery/s ... imit/last1

http://www.shipsnostalgia.com/gallery/s ... imit/last1

Scouse

Author:  Bill Waldorf [ Mon Dec 21, 2009 9:12 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

scousegit wrote:
Just come accross these two images of the ship, a before and after.

http://www.shipsnostalgia.com/gallery/s ... imit/last1

http://www.shipsnostalgia.com/gallery/s ... imit/last1

Scouse


I spent 30 minutes on the PC and I can't locate either one of these......... :scratch: ...........

Author:  scousegit [ Mon Dec 21, 2009 11:15 am ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Bill,

The links are working OK at this end

Scouse.

Author:  Dave Wooley [ Fri Jan 22, 2010 12:13 pm ]
Post subject:  Re: Scratchbuilding the USS Santee (CVE-29) in 1/96

Just bringing up Bills truly magnificent and inspirational USS Santee build. I just keep going back to have a look.
Dave Wooley :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Page 10 of 11 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/