I need a reference recommendation for CV-4 Ranger and CV-7 Wasp. I am planning to build my 1/700 Corsair Armada kits of these finally.
Thanks,
Rob
CV-4 or CV-7
Moderators: Timmy C, Gernot, Olaf Held, ArizonaBB39, JWintjes
- Rob Weilacher
- Posts: 113
- Joined: Fri Jan 28, 2005 7:30 am
- Location: Atlanta, Georgia, USA
CV-4 or CV-7
Rob Weilacher
-
RNfanDan
- Posts: 862
- Joined: Fri Sep 16, 2005 3:17 pm
- Location: EN83
Re: CV-4 or CV-7
I recommend for a start, the Profile Morskie Wasp book.
Tougher call for Ranger--Cressman's book is quite good, but I found it to be not much help for my own model. I bought some "plans" of the ship from a vendor on eBay, but they were rather crude and only featured one profile and plan view, with no hull stations.
By the way, I commend you on your choices! These ships never got much recognition for their contributions to the war, but were nevertheless important to the allied Med campaigns.
Tougher call for Ranger--Cressman's book is quite good, but I found it to be not much help for my own model. I bought some "plans" of the ship from a vendor on eBay, but they were rather crude and only featured one profile and plan view, with no hull stations.
By the way, I commend you on your choices! These ships never got much recognition for their contributions to the war, but were nevertheless important to the allied Med campaigns.
- Rob Weilacher
- Posts: 113
- Joined: Fri Jan 28, 2005 7:30 am
- Location: Atlanta, Georgia, USA
Re: CV-4 or CV-7
Dan,
Thanks for the tip. Unfortunately, I thought that was going to be the answer, but I figured I'd fish around and see if anyone had any ideas. Much appreciated.
Rob
Thanks for the tip. Unfortunately, I thought that was going to be the answer, but I figured I'd fish around and see if anyone had any ideas. Much appreciated.
Rob
Rob Weilacher