Hello gentlemen!
This water making technique has been demonstrated and photographed by
Dominique Bantonfrom
Costa Rica and is reproduced here with his kind permission in the interests of sharing modelmaking techniques worldwide
I have merely posted them here on his behalf.
Translation French-English courtesy of my chum Ute B...
Fascinating stuff!
Jim B
---------------------------------------------------------------------------------------------------------------------
Attachment:
x312.jpg [ 100.11 KiB | Viewed 31705 times ]
-------------------------------------------------------------------------------------------------
Materials required:
Polystyrene sheets x 2
Wooden Pastry Rolling pin
Roll of paper Toilet tissue
Wood glue and water
...and a home-made wooden frame
Designing the diorama
On the first plate of polystyrene:
draw the cut out-line for the ship (water line)
Attachment:
x260.jpg [ 79.21 KiB | Viewed 31513 times ]
Use a rolling-pin to form the waves by exercising a rotary pressure (the polystyrene is compressible)
Attachment:
x261.jpg [ 75.36 KiB | Viewed 31514 times ]
Attachment:
x262.jpg [ 75.66 KiB | Viewed 31503 times ]
Attachment:
x263.jpg [ 68.75 KiB | Viewed 31507 times ]
After the previous 2 operations, glue the second plate with some wood glue and fix with sellotape.
Attachment:
x264.jpg [ 62.02 KiB | Viewed 31519 times ]
Cover the upper side with a coat of diluted wood glue
Put the first layer of toilet paper on, using a brush soaked in glue, by applying soft pressure in order to make it conform to the contours .
Attachment:
x265.jpg [ 72.12 KiB | Viewed 31534 times ]
When the first layer is dry, put a second one on vertically to the first one and create
the water wakelines at the back by "pushing” the paper back with the brush.
Attachment:
x266.jpg [ 76.72 KiB | Viewed 31505 times ]
Attachment:
x267.jpg [ 83.25 KiB | Viewed 31509 times ]
Attachment:
x270.jpg [ 72.58 KiB | Viewed 31553 times ]
When the diorama is dry, put on the first coat of paint, then let dry. After that, design wave crests by pushing the paper here and there with the brush.
Attachment:
x271.jpg [ 96.4 KiB | Viewed 31537 times ]
Attachment:
x272.jpg [ 59.38 KiB | Viewed 31512 times ]
Measure and draw the cut-out-lines for the border/ case/ box of the diorama
After cutting out the wooden pieces assemble the box together
Attachment:
x273.jpg [ 51.27 KiB | Viewed 31517 times ]
Attachment:
x274.jpg [ 43.43 KiB | Viewed 31513 times ]
Attachment:
x275.jpg [ 33.54 KiB | Viewed 31507 times ]
Put 2 coats of paint on, mixing blue and black to achieve the desired shade
Attachment:
x283.jpg [ 71.23 KiB | Viewed 31582 times ]
Attachment:
x276.jpg [ 89.28 KiB | Viewed 31529 times ]
Attachment:
x277.jpg [ 101.23 KiB | Viewed 31512 times ]
Attachment:
x278.jpg [ 113.98 KiB | Viewed 31509 times ]
Attachment:
x279.jpg [ 109.96 KiB | Viewed 31507 times ]
Before the second coat (marine blue) dries, put a light coat of white on top of the crests to achieve the desired whitening effect.
Attachment:
x284.jpg [ 65.45 KiB | Viewed 31502 times ]
Attachment:
x280.jpg [ 101.19 KiB | Viewed 31510 times ]
Attachment:
x281.jpg [ 118.67 KiB | Viewed 31510 times ]
Attachment:
x282.jpg [ 129.96 KiB | Viewed 31511 times ]
Take off all excess paint with a soft cloth
Attachment:
x285.jpg [ 88.79 KiB | Viewed 31504 times ]
Attachment:
x286.jpg [ 121.16 KiB | Viewed 31514 times ]
Attachment:
x287.jpg [ 108.59 KiB | Viewed 31506 times ]
Attachment:
x288.jpg [ 128.7 KiB | Viewed 31524 times ]
Attachment:
x289.jpg [ 158.38 KiB | Viewed 31517 times ]
Lead the brush softly over the crests
After everything has dried, install the model and make he connections between the sea and the hull being with the same blends of paper and glue, either with a spatula or brush.
-----------------------------------------------------------
The finished effect with the 1/96 USS Alabama placed within
Attachment:
x290.jpg [ 78.63 KiB | Viewed 31518 times ]
Attachment:
x291.jpg [ 75.04 KiB | Viewed 31589 times ]
Attachment:
x292.jpg [ 82.18 KiB | Viewed 31646 times ]
Attachment:
x293.jpg [ 97.75 KiB | Viewed 31545 times ]
Attachment:
x297.jpg [ 67.68 KiB | Viewed 31542 times ]
Attachment:
x299.jpg [ 64.89 KiB | Viewed 31563 times ]
Attachment:
x300.jpg [ 65.36 KiB | Viewed 31522 times ]
Attachment:
x301.jpg [ 66.23 KiB | Viewed 31539 times ]
Attachment:
x303.jpg [ 83.03 KiB | Viewed 31564 times ]
Attachment:
x306.jpg [ 96.77 KiB | Viewed 31559 times ]
Attachment:
x309.jpg [ 87.61 KiB | Viewed 31529 times ]
Attachment:
x310.jpg [ 72.23 KiB | Viewed 31497 times ]
Attachment:
x311.jpg [ 78.36 KiB | Viewed 31513 times ]
Attachment:
x30444.jpg [ 80.73 KiB | Viewed 31523 times ]
The full build up article is beyond the remit of this posting--it can be viewed here in French
http://netmarine.net/phpBB/viewtopic.ph ... c&start=15however, a few examples of the sheer amount of work involved in the construction of this fine model-based on the venerable old Revell offering...
can ge garnered from these few images...
Attachment:
x230a.jpg [ 103.06 KiB | Viewed 31535 times ]
Attachment:
x235.jpg [ 114.57 KiB | Viewed 31501 times ]
Attachment:
x246.jpg [ 118.67 KiB | Viewed 31513 times ]
Attachment:
canon00.JPG [ 105.53 KiB | Viewed 31513 times ]
Attachment:
greement02.JPG [ 93.96 KiB | Viewed 31503 times ]
Attachment:
hybrid02.JPG [ 84.46 KiB | Viewed 31521 times ]