Hello gentlemen!
This water making technique has been demonstrated and photographed by
Dominique Bantonfrom
Costa Rica and is reproduced here with his kind permission in the interests of sharing modelmaking techniques worldwide
I have merely posted them here on his behalf.
Translation French-English courtesy of my chum Ute B...
Fascinating stuff!
Jim B
---------------------------------------------------------------------------------------------------------------------
Attachment:
x312.jpg [ 100.11 KiB | Viewed 31699 times ]
-------------------------------------------------------------------------------------------------
Materials required:
Polystyrene sheets x 2
Wooden Pastry Rolling pin
Roll of paper Toilet tissue
Wood glue and water
...and a home-made wooden frame
Designing the diorama
On the first plate of polystyrene:
draw the cut out-line for the ship (water line)
Attachment:
x260.jpg [ 79.21 KiB | Viewed 31507 times ]
Use a rolling-pin to form the waves by exercising a rotary pressure (the polystyrene is compressible)
Attachment:
x261.jpg [ 75.36 KiB | Viewed 31508 times ]
Attachment:
x262.jpg [ 75.66 KiB | Viewed 31497 times ]
Attachment:
x263.jpg [ 68.75 KiB | Viewed 31501 times ]
After the previous 2 operations, glue the second plate with some wood glue and fix with sellotape.
Attachment:
x264.jpg [ 62.02 KiB | Viewed 31513 times ]
Cover the upper side with a coat of diluted wood glue
Put the first layer of toilet paper on, using a brush soaked in glue, by applying soft pressure in order to make it conform to the contours .
Attachment:
x265.jpg [ 72.12 KiB | Viewed 31528 times ]
When the first layer is dry, put a second one on vertically to the first one and create
the water wakelines at the back by "pushing” the paper back with the brush.
Attachment:
x266.jpg [ 76.72 KiB | Viewed 31499 times ]
Attachment:
x267.jpg [ 83.25 KiB | Viewed 31503 times ]
Attachment:
x270.jpg [ 72.58 KiB | Viewed 31547 times ]
When the diorama is dry, put on the first coat of paint, then let dry. After that, design wave crests by pushing the paper here and there with the brush.
Attachment:
x271.jpg [ 96.4 KiB | Viewed 31531 times ]
Attachment:
x272.jpg [ 59.38 KiB | Viewed 31506 times ]
Measure and draw the cut-out-lines for the border/ case/ box of the diorama
After cutting out the wooden pieces assemble the box together
Attachment:
x273.jpg [ 51.27 KiB | Viewed 31511 times ]
Attachment:
x274.jpg [ 43.43 KiB | Viewed 31507 times ]
Attachment:
x275.jpg [ 33.54 KiB | Viewed 31501 times ]
Put 2 coats of paint on, mixing blue and black to achieve the desired shade
Attachment:
x283.jpg [ 71.23 KiB | Viewed 31576 times ]
Attachment:
x276.jpg [ 89.28 KiB | Viewed 31523 times ]
Attachment:
x277.jpg [ 101.23 KiB | Viewed 31506 times ]
Attachment:
x278.jpg [ 113.98 KiB | Viewed 31503 times ]
Attachment:
x279.jpg [ 109.96 KiB | Viewed 31501 times ]
Before the second coat (marine blue) dries, put a light coat of white on top of the crests to achieve the desired whitening effect.
Attachment:
x284.jpg [ 65.45 KiB | Viewed 31496 times ]
Attachment:
x280.jpg [ 101.19 KiB | Viewed 31504 times ]
Attachment:
x281.jpg [ 118.67 KiB | Viewed 31504 times ]
Attachment:
x282.jpg [ 129.96 KiB | Viewed 31505 times ]
Take off all excess paint with a soft cloth
Attachment:
x285.jpg [ 88.79 KiB | Viewed 31498 times ]
Attachment:
x286.jpg [ 121.16 KiB | Viewed 31508 times ]
Attachment:
x287.jpg [ 108.59 KiB | Viewed 31500 times ]
Attachment:
x288.jpg [ 128.7 KiB | Viewed 31518 times ]
Attachment:
x289.jpg [ 158.38 KiB | Viewed 31511 times ]
Lead the brush softly over the crests
After everything has dried, install the model and make he connections between the sea and the hull being with the same blends of paper and glue, either with a spatula or brush.
-----------------------------------------------------------
The finished effect with the 1/96 USS Alabama placed within
Attachment:
x290.jpg [ 78.63 KiB | Viewed 31512 times ]
Attachment:
x291.jpg [ 75.04 KiB | Viewed 31583 times ]
Attachment:
x292.jpg [ 82.18 KiB | Viewed 31640 times ]
Attachment:
x293.jpg [ 97.75 KiB | Viewed 31539 times ]
Attachment:
x297.jpg [ 67.68 KiB | Viewed 31536 times ]
Attachment:
x299.jpg [ 64.89 KiB | Viewed 31557 times ]
Attachment:
x300.jpg [ 65.36 KiB | Viewed 31516 times ]
Attachment:
x301.jpg [ 66.23 KiB | Viewed 31533 times ]
Attachment:
x303.jpg [ 83.03 KiB | Viewed 31558 times ]
Attachment:
x306.jpg [ 96.77 KiB | Viewed 31553 times ]
Attachment:
x309.jpg [ 87.61 KiB | Viewed 31523 times ]
Attachment:
x310.jpg [ 72.23 KiB | Viewed 31491 times ]
Attachment:
x311.jpg [ 78.36 KiB | Viewed 31507 times ]
Attachment:
x30444.jpg [ 80.73 KiB | Viewed 31517 times ]
The full build up article is beyond the remit of this posting--it can be viewed here in French
http://netmarine.net/phpBB/viewtopic.ph ... c&start=15however, a few examples of the sheer amount of work involved in the construction of this fine model-based on the venerable old Revell offering...
can ge garnered from these few images...
Attachment:
x230a.jpg [ 103.06 KiB | Viewed 31529 times ]
Attachment:
x235.jpg [ 114.57 KiB | Viewed 31495 times ]
Attachment:
x246.jpg [ 118.67 KiB | Viewed 31507 times ]
Attachment:
canon00.JPG [ 105.53 KiB | Viewed 31507 times ]
Attachment:
greement02.JPG [ 93.96 KiB | Viewed 31497 times ]
Attachment:
hybrid02.JPG [ 84.46 KiB | Viewed 31515 times ]