Carrier Builders Yard, whats on the Slipway

Moderators: BB62vet, MartinJQuinn, JIM BAUMANN, Jon, Dan K

User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

kidcurrie42 wrote:Same with all modelers, Aircraft modelers super detail a cockpit only to close it, Auto and Military guys super detail insides and engines, its because we know its there and its got to be there, just is
some did a 1/48 F-86 with a well detail engine that look so real. then he seal it up inside the jet. he could place it out side.
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

been away for awhile. anything new?
User avatar
Mark McKinnis
Posts: 1612
Joined: Fri Nov 24, 2006 7:30 pm
Location: Cape Canaveral Florida

Re: Carrier Builders Yard, whats on the Slipway

Post by Mark McKinnis »

Not much Carrier Building going on. Here is what I did for the Cold War Build. I have been on the road so much that I can't get anything done.


viewtopic.php?f=74&t=73049
User avatar
kidcurrie42
Posts: 2586
Joined: Tue Jun 28, 2005 1:24 pm
Location: South Carolina

Re: Carrier Builders Yard, whats on the Slipway

Post by kidcurrie42 »

Ok guys, I am alive, just not too well at the moment, a virus knocked the crap out of me for a few weeks, just feeling tired a lot at the moment, Leg is playing up too.

Great Hancock Mark :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

JFK coming on well gtb :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Happy Modeling

John
Si Vis Pacem, Para Bellum
User avatar
Hippy Ed
Posts: 2013
Joined: Wed Nov 29, 2006 12:22 pm
Location: Calif
Contact:

Re: Carrier Builders Yard, whats on the Slipway

Post by Hippy Ed »

kidcurrie42 wrote:Ok guys, I am alive, just not too well at the moment, a virus knocked the crap out of me for a few weeks, just feeling tired a lot at the moment, Leg is playing up too.

Great Hancock Mark :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

JFK coming on well gtb :thumbs_up_1: :thumbs_up_1: :thumbs_up_1:

Happy Modeling

John
I know da feeling John. It's got me keelhaulled at the moment
If ya lose yer sense of humor...
You've lost everything...

On the Bench:
1/720 Italeri CVN-68 ca 1976/77
1/800 ARii 1/800 CV-59 backdating to 1961 (CVA-59)
1/700Trumpy USS Hornet CV-8 "Doolittle Raiders"
User avatar
kidcurrie42
Posts: 2586
Joined: Tue Jun 28, 2005 1:24 pm
Location: South Carolina

Re: Carrier Builders Yard, whats on the Slipway

Post by kidcurrie42 »

You get well Hippy :thumbs_up_1:

John
Si Vis Pacem, Para Bellum
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

get well both of you guys. just don't send that crap over to me. got enough health issue.
User avatar
Hippy Ed
Posts: 2013
Joined: Wed Nov 29, 2006 12:22 pm
Location: Calif
Contact:

Re: Carrier Builders Yard, whats on the Slipway

Post by Hippy Ed »

gtbred wrote:get well both of you guys. just don't send that crap over to me. got enough health issue.

Thanks Red! Btw, ATCHU!!! :heh: :heh: :jest: We don't wanna be selfish, so We'll share it with ya bro...
If ya lose yer sense of humor...
You've lost everything...

On the Bench:
1/720 Italeri CVN-68 ca 1976/77
1/800 ARii 1/800 CV-59 backdating to 1961 (CVA-59)
1/700Trumpy USS Hornet CV-8 "Doolittle Raiders"
User avatar
JevJanson
Posts: 139
Joined: Wed Feb 02, 2011 11:52 pm
Location: Colstrip, Mt.

Re: Carrier Builders Yard, whats on the Slipway

Post by JevJanson »

Hey, guys! It's been awhile since I was last on, and am surprised there are no new carrier pictures since my last visit. I guess everyone is just really busy these days.

Also, I am going to be starting my 1/350 scale USS Ranger scratch build soon, so It might be nice if some could post some diagrams of the ship. I've been searching the web for exact dimensions of the ship in the scale, but I have had no luck so far.
Greetings from Montana!

Ryon Olson
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

which Ranger? WWII or CVA-61?
User avatar
JevJanson
Posts: 139
Joined: Wed Feb 02, 2011 11:52 pm
Location: Colstrip, Mt.

Re: Carrier Builders Yard, whats on the Slipway

Post by JevJanson »

CV-61. I am going to build the ship as she was when decommissioned.
Greetings from Montana!

Ryon Olson
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

That is great I'll be watching. I did Ranger in 1967 form for Hippy. Image
User avatar
JevJanson
Posts: 139
Joined: Wed Feb 02, 2011 11:52 pm
Location: Colstrip, Mt.

Re: Carrier Builders Yard, whats on the Slipway

Post by JevJanson »

How do you make the hull curve on the forward section? I've been trying to figure it out for the past 2 days, but with no luck.
Greetings from Montana!

Ryon Olson
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

do you mean the sponson?
User avatar
JevJanson
Posts: 139
Joined: Wed Feb 02, 2011 11:52 pm
Location: Colstrip, Mt.

Re: Carrier Builders Yard, whats on the Slipway

Post by JevJanson »

I should have been clearer. Not the sponson, but where the forward hull meets the deck.
Greetings from Montana!

Ryon Olson
User avatar
Hippy Ed
Posts: 2013
Joined: Wed Nov 29, 2006 12:22 pm
Location: Calif
Contact:

Re: Carrier Builders Yard, whats on the Slipway

Post by Hippy Ed »

gtbred wrote:That is great I'll be watching. I did Ranger in 1967 form for Hippy. Image

Yep, dat ya did my friend :big_grin: I just updated my thread on her. Hopefully i'll get something done on her soon :big_grin:
If ya lose yer sense of humor...
You've lost everything...

On the Bench:
1/720 Italeri CVN-68 ca 1976/77
1/800 ARii 1/800 CV-59 backdating to 1961 (CVA-59)
1/700Trumpy USS Hornet CV-8 "Doolittle Raiders"
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

JevJanson wrote:I should have been clearer. Not the sponson, but where the forward hull meets the deck.
very important question. is this going to be a waterline or full hull? because the waterline is easier for me to do the bow. :wave_1:
User avatar
JevJanson
Posts: 139
Joined: Wed Feb 02, 2011 11:52 pm
Location: Colstrip, Mt.

Re: Carrier Builders Yard, whats on the Slipway

Post by JevJanson »

I think I might try to do a full hull, but below the water line will be balsa foam. Everything above the waterline except for parts of the sponsons and the island are going to be paper. The island and sponson parts will be sheet plastic.
Greetings from Montana!

Ryon Olson
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

have to get battieries for my camera. but i will show i got the hurricane bow to form on J.F.K.
User avatar
gtbred
Posts: 2712
Joined: Wed Jan 13, 2010 9:10 am
Location: san francisco

Re: Carrier Builders Yard, whats on the Slipway

Post by gtbred »

photos of Hippys Ranger and Indy I did for a friend. Image Image Image Image
Post Reply

Return to “Works in Progress”