The Art Of The Storyboard Diorama

[JohnReid]

I have decided to have a bit of fun laying the floor in Morton's compartment.I have gone one size larger on the planks(stir stiks)which gives me a nice edge to work with when doing the following technique.Wood floors can be quite beautiful when laid properly.I want to try a technique that I haven't used since my old ship building days of HMS Victory.Morton must have hired a couple of unemployed shipbuilders to do the floors and cabinetry for his rail car.There will be no visible nails or wood trunnels holding the floor in place.There will however be a black waterproof caulking material between each board which will make the floor more interesting to the eye.The wood is birch.

[JohnReid]

[JohnReid]

Ya know when aging and weathering hardwoods I found found that the best way to do it is too weather it as it would do naturally,in other words from a polished finish to a dull.In this way you can retain the beauty of the grain as it seemingly ages.The birch floor for example was originally a gloss finish that was dulled using very fine sandpaper for the wear and tear, then chalk pastels representing the build up of crud over the years ,followed by a spray of matte acrylic fixative to hold it all in place.Later more crud can be built up in all the cracks and crevasses

and to create shadows.

[JohnReid]

[JohnReid]

Well I have decided to add a few more months work to the project.I was originally planning to save a little time by just weathering the exterior of this car but because nothing looks as good as the real thing,wood, I now plan to board it up instead.I have also opened up all the doors both interior and exterior for better camera angle shots of the interior.I will retain the red framed windows and stain the siding about the same green.
On the roof it is presently what looks like a fine sandpaper type surface.Does anyone here know what may have been used on the real thing ? A tar paper or canvas material ?
I could use a cloth backed sandpaper of appropriate grit and just paint it .Any ideas ?

[JohnReid]

Please note:

I have moved all the pictures in my photobucket taken up until now ,from the General Album to the G Scale Trains Album.Moving pics will cause them to delete in the General thread but they are still available on my G scale album for those who may be interested.

Bending stripwood:

Bending wood is simple for a rectangular roof such as this,shipbuilding is another story.I just use plain old warm tap water and soak the area that I want to bend for a few minutes in this case.(The thicker the wood ,the longer the soak) .I then take an old stick type hair curler and put it in a holding devise,I use a clamp. I then let it warm up to hair curling temperature which seems to be just perfect for bending thin strip wood like this.I hold the dry end in one hand and with the other wet end I use a pencil with an eraser on the end and apply increasing amounts of pressure with the eraser until I get what I am looking for.

Why the eraser end ,well it helps as a tool for bending instead of your fingers and tends not to slip on the wet surface.Keep checking that you are getting the proper bend and re-soak and do it again if necessary.You will want to slightly over bend it as there is a certain amount of spring back when the pressure is remove.If the piece of wood you are working with keeps breaking turn it over and try to bend it the other way.Use only straight grained wood running lengthwise on the strip as cross grain simply won't work without breaking.Most hobby woods bend without any problems.I used the thin long type coffee stir stiks used to stir the extra large double doubles.Your local coffee shop manager may sell you a box for a few bucks especially when you tell him what your using them for.He probably built models too in his younger days !

Most stiks and tongue depressors are birch wood ,which is in the hardwood category. So depending on the thickness they will require more soaking time in hotter water than say basswood , popular or pine.Have fun and good luck !

The above is in answer to a question I got from a another modeler.

[Cadman]

I have moved all the pictures in my photobucket taken up until now ,from the General Album to the G Scale Trains Album.Moving pics will cause them to delete in the General thread but they are still available on my G scale album for those who may be interested..

In case you didn't notice there is an edit button in the lower right on your posts that should allow you to go back and change the links to those missing images.

[JohnReid]

I have moved all the pictures in my photobucket taken up until now ,from the General Album to the G Scale Trains Album.Moving pics will cause them to delete in the General thread but they are still available on my G scale album for those who may be interested..

In case you didn't notice there is an edit button in the lower right on your posts that should allow you to go back and change the links to those missing images.

Darn your right ! Now I will have to go back and figure what goes where.