The Ship Model Forum

The Ship Modelers Source
It is currently Fri Mar 29, 2024 12:35 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 177 posts ]  Go to page 1, 2, 3, 4, 5 ... 9  Next
Author Message
 Post subject: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:04 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 3:06 pm
Posts: 167
Location: Liberty, Missouri
I've been slowly plugging away on this monster. I'm using the Pontos detail set, which is absolutley incredible and yet almost insane at the same time. I'm sure I won't use every single part in the set, after all I do want to finish this some day. Anyway, I wasn't really planning on doing an "in progress" thread but it's a slow day here so what the heck. I'll be depicting the ship as of October 1945 after the decks were holeystoned back to teak.

Image
Image
Image

The hull is painted and partly weathered. I beefed up the anchor chain with some stock I had, and added the paravane chain.

_________________
My personal modeling site: http://keldq.webs.com/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:08 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 3:06 pm
Posts: 167
Location: Liberty, Missouri
The individual ladder rungs have been fun!

Image
Image
Image

These are scattered all over the ship. You must drill two holes for each rung. The drilling guides provided by Pontos are invaluable for this.

_________________
My personal modeling site: http://keldq.webs.com/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:11 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 3:06 pm
Posts: 167
Location: Liberty, Missouri
The wood deck is a work of art and the fit is precise.

Image
Image
Image

_________________
My personal modeling site: http://keldq.webs.com/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:15 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 3:06 pm
Posts: 167
Location: Liberty, Missouri
And here is where I'm at as of today.

Image
Image
Image
Image
Image
Image
Image

It does feel good to be working on a ship model again, it's been a while!

_________________
My personal modeling site: http://keldq.webs.com/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:20 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 6:00 pm
Posts: 12138
Location: Ottawa, Canada
Welcome back Kelly! Great to see you tackling this project!

_________________
De quoi s'agit-il?


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:27 pm 
Offline
User avatar

Joined: Thu Apr 03, 2008 10:48 pm
Posts: 2612
Location: Connecticut, USA
Very nice, and welcome back indeed! Glad to see you at another ship, given the results of your last ship build on this forum! So will we be seeing her on the contest table at the nats in ohio next year, or are you actually planning to cart that beast to virginia this summer? Assuming she is done in time of course, but it sure looks like you are well on your way with her.

_________________
Enlisted men are stupid, but very cunning and deceitful and bear considerable watching." - Marine Corps Officers Manual, 1894

http://www.modelshipgallery.com/gallery ... index.html


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 5:44 pm 
Offline
User avatar

Joined: Mon Nov 11, 2013 11:01 pm
Posts: 1257
Location: Detroit area
Bloody hell, this is the kind of prog shots I've been longing to see since this behemoth hit the shelves! Had a look at your gallery as well, Kelly, and it looks like you're quite a Renaissance modeler!

_________________
Sean Nash, ACG (aircraft camo gestapo)

On the ways:
1/200 Trumpeter HMS Nelson
1/700 Tamiya USS Yorktown CV-5

In the stash:
1/35 Italiari PT-109
1/35 Tamiya "Pibber" Patrol Boat
1/350 Trumpeter USS Yorktown CV-10


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sun Feb 09, 2014 6:22 pm 
Offline
User avatar

Joined: Sat Sep 15, 2007 11:40 pm
Posts: 575
Location: California
Looks like you're really coming along. It looks great. Should be most impressive when you're finished. :thumbs_up_1:

Paul

_________________
Image

http://paulbudzik.com/current-projects/Neptune/Lockheed_Neptune_Model_Budzik.html
http://paulbudzik.com/tools-techniques/outside_the_box.html


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Mon Feb 10, 2014 1:31 am 
Offline
User avatar

Joined: Mon Nov 04, 2013 2:17 am
Posts: 283
Location: _/\/¯¯¯¯¯\/\_ Cape Town
Looking really awesome so far :D :thumbs_up_1:

_________________
Jacques
_________________
Currently working on:
1/350 CVN 65 - Project Enterprise
http://www.shipmodels.info/mws_forum/viewtopic.php?f=59&t=210966


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Mon Feb 10, 2014 4:34 am 
Offline

Joined: Mon Sep 02, 2013 12:57 am
Posts: 27
:thumbs_up_1: This is really really awesome! i still waiting mine, ordered from local hobby shop but still now news yet.


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 10:29 am 
Offline
User avatar

Joined: Mon May 14, 2012 12:18 pm
Posts: 2068
Location: Salt Lake City, USA
Great work so far!

Did you use the kit bridge windows or the Pontos replacements?

_________________
-Jason Channell

Current Project: 1/200 Bismarck


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 11:22 am 
Offline
User avatar

Joined: Mon Jan 10, 2005 3:06 pm
Posts: 167
Location: Liberty, Missouri
Channell wrote:
Great work so far!

Did you use the kit bridge windows or the Pontos replacements?


Thanks everybody! I used the kit windows, mainly because the Pontos set doesn't provide for ALL of the windows. And mixing the thinner PE with the thicker plastic parts just looked wrong to me, so I just ended up using the kit parts. At least it is consistent.

_________________
My personal modeling site: http://keldq.webs.com/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 11:38 am 
Offline

Joined: Fri Feb 04, 2005 10:49 pm
Posts: 90
Location: Westlake Ohio
looking great Kelly. :thumbs_up_1: Always love seeing your work!

I have a question Kelly, regarding the wood deck.
Is the adhesive backing on those decks super-sticky? In other words.......does the stuff "grab-hold" instantly allowing NO movement for proper alignment? Also........on the flip side of that........did you feel the need to use any additional adhesives of any kind to ensure a secure bond that will last for years on end?

I ask because although I have not even ordered my kit yet.......my fear would be that over time the wood decking could lift up in places. (much like old floor tile is known to do!).

Curious what you have to say, because if YOU trust the decking to stay put........then I'm going to trust it to stay put on mine :smallsmile:

Russ


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 11:45 am 
Offline
User avatar

Joined: Mon May 14, 2012 12:18 pm
Posts: 2068
Location: Salt Lake City, USA
Kelly Quirk wrote:
Channell wrote:
Great work so far!

Did you use the kit bridge windows or the Pontos replacements?


Thanks everybody! I used the kit windows, mainly because the Pontos set doesn't provide for ALL of the windows. And mixing the thinner PE with the thicker plastic parts just looked wrong to me, so I just ended up using the kit parts. At least it is consistent.


I think you made the right choice. I don't understand why Pontos didn't offer replacements for all the rectangular windows on the back of the bridge, flag bridge, ect. :pout:

BTW, I just cruised your website and wow do you do awesome work! :thumbs_up_1:

_________________
-Jason Channell

Current Project: 1/200 Bismarck


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 12:43 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 3:06 pm
Posts: 167
Location: Liberty, Missouri
RDC wrote:
looking great Kelly. :thumbs_up_1: Always love seeing your work!

I have a question Kelly, regarding the wood deck.
Is the adhesive backing on those decks super-sticky? In other words.......does the stuff "grab-hold" instantly allowing NO movement for proper alignment? Also........on the flip side of that........did you feel the need to use any additional adhesives of any kind to ensure a secure bond that will last for years on end?

I ask because although I have not even ordered my kit yet.......my fear would be that over time the wood decking could lift up in places. (much like old floor tile is known to do!).

Curious what you have to say, because if YOU trust the decking to stay put........then I'm going to trust it to stay put on mine :smallsmile:

Russ


Thanks Russ. The wood deck is very sticky and it does tend to grab hold. I have read that you can mist some water onto the back side first and that will give you a little play time to work it in. I just went straight ahead with it, starting at one end and slowly laying it down. I then burnished it down with a smooth metal burnishing tool. Like I mentioned, the fit has been perfect. I'm pretty sure it will stay down, I've experimented with some of the scrap and once it is down, it's not going anywhere. I guess we'll see what happens over time...

_________________
My personal modeling site: http://keldq.webs.com/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 1:28 pm 
Offline
User avatar

Joined: Mon Nov 18, 2013 3:41 pm
Posts: 2927
Location: Mocksville, NC
Kelly,

Excellent work; very impressive!! Reading through the various posts, I'm in agreement that sticking with one style of bridge window was correct. I'm making mental notes on all the MISSOURI builds going on in order to save this info for my own use when the time comes.

Thanks for sharing the very nice photos.

Hank

_________________
HMS III
Mocksville, NC
BB62 vet 68-69

Builder's yard:
USS STODDARD (DD-566) 66-68 1:144, Various Lg Scale FC Directors
Finished:
USS NEW JERSEY (BB-62) 67-69 1:200
USN Sloop/Ship PEACOCK (1813) 1:48
ROYAL CAROLINE (1748) 1:47
AVS (1768) 1:48


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 5:00 pm 
Offline

Joined: Fri Feb 04, 2005 10:49 pm
Posts: 90
Location: Westlake Ohio
I'm very glad to hear that Pontos provides a drilling template for those tiny ladder rungs. Another thing, in looking at the pic Kelly posted with the piece sitting on the tip of the knife blade.........it appears that the rungs are flat, as opposed to round. If so....that is a GOOD thing in that the tiny piece will be easier to hold onto with tweezers than if they were round.

Still, I sure hope Pontos provides a few spares because ain't nothing worse than holding onto a tiny piece like that with tweezers only to have the part "snap-away".....and fly across the room never to be seen again!

I'm sure you've all had this happen!

Russ


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Fri Feb 14, 2014 5:22 pm 
Offline
User avatar

Joined: Thu Aug 27, 2009 11:05 am
Posts: 2261
Location: Paris France
I just discovered your work :woo_hoo: it is superb ,I like it :thumbs_up_1:
cheers
nicolas

_________________
https://ladiagonaledubosco.blogspot.fr/


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sat Feb 15, 2014 8:11 pm 
Offline

Joined: Wed Jan 02, 2013 1:15 am
Posts: 5003
The deck area around the 52 and 54 mounts seems a bit strange, being recessed around the mount ring. I remember being on BB63 back in the 60's whilst still in its early post war outfit and the deck around the mount was flush with the decking as it is today. Is this due to adding the relief of the deck?

At any rate a very nice build, the slight weathering of the paint forward is particularly convincing.

Cheers: t


Report this post
Top
 Profile  
Reply with quote  
 Post subject: Re: 1/200 USS Missouri
PostPosted: Sat Feb 15, 2014 8:43 pm 
Offline

Joined: Wed Jan 02, 2013 1:15 am
Posts: 5003
Attachment:
mount_54_2.jpg
mount_54_2.jpg [ 183.55 KiB | Viewed 15614 times ]
Not the greatest photo, but one can see that the steel decking around the mounts are the same level as the wooden deck.

Cheers: T


Report this post
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 177 posts ]  Go to page 1, 2, 3, 4, 5 ... 9  Next

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: cruiz and 61 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group