I am building a 1/350 USS Carl Vinson. (See
viewtopic.php?f=59&t=165358 )
I realized that the hangar bays are filled with various signs and logo's and there are no decal sets available to replicate these.
Therefore, I made my own set. The sheet includes AFFF signs (with the various group and frame numbers), First Aid, Fire Extinguishers (CO2 and PKP), and various power outlets. (115V and 440V)
Also included is the naval aviation logo for the inside of the external hangar bay doors and the ship and air wing logo for the internal fire doors.
The safety stripes are both straight (for deck) and angled for doorways and sponsons. These are "cut to proper width"
The set in the picture is for the USS carl Vinson and CVW-15 (from circa 1983)
I can change the ship and air wing logo to the ones of your choice.
If you can print your own decals, Just message me your email and I will send you a hi-res (600dpi) photo.
If you cannot, I can print a set out for the cost of paper and shipping.
(this is a sheet of clear film which requires each decal to be cut/trimmed before soaking in water and applying)