Добрый день,товарищи. Хочу представить Вашему вниманию модель транспорта типа "Liberty" проекта EC2-S-C1 под названием "Красногвардеец".
Сама идея сделать модель именно этого корабля возникла,когда я увидел тему Владимира Якубова с незаконченной стройкой данной модели. Меня очень заинтересовала фотография "Красногвардейца",сделанная канадским патрульным самолетом неподалёку от Ванкувера,на которой он запечатлён со знаками нейтрала. Собственно по этой фотографии, а так же по фотографиям других кораблей типа "Liberty" и велась стройка. Насколько успешный результат-судить Вам,уважаемые зрители.
Собственно,комплектность:
-набор от фирмы Trumpeter;
-наборы фототравления от фирмы GMM для американских боевых кораблей(крейсеров и эсминцев,линкоров и авианосцев). Это из запасов;
-набор фототравления от фирмы L'Arsenal для моделей кораблей типа "Liberty";
-набор фототравления от фирмы Tom's Modelworks для кораблей типа "Liberty";
-декали знаков нейтраль,сделанные на заказ;
-подставка деревянная,сделанная мастером с Каропки Анатолием Пожидаевым ( который сделал для меня и все остальные подставки).
Теперь переходим к самой модели. Начнем с того,что было сделано и/или переделано:
-переделана надстройка так как изкоробочная сильно отличалась от нужной;
-сделаны гнезда зенитных автоматов;
-сымитирован трубопровод на надстройке;
-сделаны заново мачты и грузовые стрелы;
-сделан новый винт (но тут и просчёт);
-сделаны заново крылья мостика и их подпорки;
-сымитирована "клетка" на тыльной стороне надстройки;
-проведён такелаж;
-сделаны из тонкой проволоки флагштоки;
-доработана дымовая труба;
-из колечек из проволоки сделаны все иллюминаторы;
-сделаны новые спасательные плоты в районе мачт;
-сделаны дополнительные шлюпки в районе второй мачты,шлюпбалка к ним и основание под их размещение.
Теперь переходим к косякам:
-заметны огромные капли клея в районе крепления грузовых стрел к стенке надстройки и в районе крепления мачт к надстройке (уж слишком часто сносил);
-облажался с направлением вращения винта. Тут совсем без комментариев,ибо нашел проблему на ровном месте,а как-до сих пор понять не могу;
-поленился переделать руль на более правдоподобный;
-видно,что для второй мачты горизонт завален из-за излишне натянутого такелажа;
-очень сильно промахнулся с размером знаков нейтрала на надстройке;
-не совсем ровно стоят постаменты под носовую группу шлюпок.
Вроде как перечислил все свои недоработки. Но если заметите ещё,то милости прошу их перечислить.
На этом доклад свой заканчиваю и предлагаю посмотреть саму стройку и итоговые фотографии. Приятного просмотра.
Good day,comrades. I want to bring to Your attention the model transport type "Liberty" of the project EC2-S-C1 called "guard".
The idea is to make a model of this vehicle came when I saw the topic Vladimir Yakubov with unfinished construction of this model. I am very interested in the photo of the "Guard"made by the canadian patrol plane near Vancouver,where he was pictured with the signs of neutral. Actually for this photo and the photos of the other ships of "Liberty" and continued building. How successful the result-You be the judge,dear viewers.
Actually,for completeness:
the kit from Trumpeter of the company;
sets of photo-etched parts from the company GMM for American warships(cruisers and destroyers,battleships and carriers). This is from inventory;
-a set of photo-etched parts from the company L'arsenal models of the ships of "Liberty";
-a set of photo-etched parts from Tom's Modelworks firms to ships of "Liberty";
-decals signs neutral,made to order;
stand wood,made by a master with Kropki Anatoly Pozhidaeva ( which did for me and all others stand).
Now on to the model itself. To begin with,what was done and/or redone:
-reworked add-on as iskrometnaya very different from need;
-made nests of anti-aircraft guns;
-simulated pipeline on the superstructure;
-redone the mast and cargo boom;
-made new screw (but there is a miscalculation);
-redone the wings of the bridge and their backup;
-simulated "cage" on the back side of the superstructure;
-the standing rigging;
-made of thin wire flagpoles;
-modified a chimney;
-of the rings of the wire made all the Windows;
-made new liferafts in the area of masts;
-made additional boats in the area of the second mast,davits for them and the reason for their placement.
Now on to the shoals:
-a huge drop of glue in the area of fastening of the cargo booms to the wall of the superstructure and the area of attachment of the mast to the superstructure of the (too often demolished);
-screwed up with the direction of rotation of the screw. There is absolutely no comment,because I found a problem on level ground,and as still can not understand;
-was too lazy to redo the wheel on more plausible;
-it is clear that for the second mast horizon littered because of the overly tight rigging;
-greatly missed the size of the neutral on the superstructure;
-not exactly exactly are the pedestals for the bow group of boats.
Sort of listed all his mistakes. But if you notice more,then you are welcome to list them.
On this report your finish and offer to see the construction and final photos. Pleasant viewing.